@@ -742,6 +742,11 @@ config VIDEO_AD5820
This is a driver for the AD5820 camera lens voice coil.
It is used for example in Nokia N900 (RX-51).
+config VIDEO_AD5823
+ tristate "AD5823 lens voice coil support"
+ help
+ This is a driver for the AD5823 camera lens voice coil / VCM.
+
config VIDEO_AK7375
tristate "AK7375 lens voice coil support"
depends on I2C && VIDEO_DEV
@@ -4,6 +4,7 @@ msp3400-objs := msp3400-driver.o msp3400-kthreads.o
obj-$(CONFIG_SDR_MAX2175) += max2175.o
obj-$(CONFIG_VIDEO_AD5820) += ad5820.o
+obj-$(CONFIG_VIDEO_AD5823) += ad5823.o
obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o
obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o
new file mode 100644
@@ -0,0 +1,311 @@
+/*
+ * Analog Devices AD5823 VCM driver
+ * Copyright 2023 Hans de Goede <hansg@kernel.org>
+ */
+
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/types.h>
+
+#include <media/v4l2-cci.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+
+#define AD5823_MAX_FOCUS_POS 1023
+
+#define AD5823_RESET CCI_REG8(1)
+#define AD5823_RESET_RESET BIT(0)
+
+#define AD5823_MODE CCI_REG8(2)
+#define AD5823_ARC_RES1 0x01
+
+#define AD5823_VCM_MOVE_TIME CCI_REG8(3)
+#define AD5823_VCM_MOVE_TIME_DEFAULT 0x80
+#define AD5823_RESONANCE_PERIOD 100000 /* in 0.1 us units */
+#define AD5823_RESONANCE_COEF 512 /* in 0.1 us units */
+
+#define AD5823_RESONANCE_OFFSET 0x80 /* for reg 0x02 bit 5 == 0 */
+
+#define AD5823_VCM_CODE CCI_REG16(4)
+#define AD5823_VCM_CODE_RING_CTRL BIT(10)
+
+#define AD5823_VCM_THRESHOLD CCI_REG16(6)
+#define AD5823_VCM_THRESHOLD_DEFAULT 0x10
+
+#define to_ad5823_device(x) container_of(x, struct ad5823_device, sd)
+
+struct ad5823_device {
+ struct v4l2_subdev sd;
+ struct regmap *regmap;
+ struct regulator *regulator;
+ u32 arc_mode;
+ u32 resonance_period; /* in 0.1 us units */
+
+ struct ad5823_v4l2_ctrls {
+ struct v4l2_ctrl_handler handler;
+ struct v4l2_ctrl *focus;
+ } ctrls;
+};
+
+static int ad5823_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct ad5823_device *ad5823 = container_of(ctrl->handler,
+ struct ad5823_device,
+ ctrls.handler);
+ int ret;
+
+ /* Only apply changes to the controls if the device is powered up */
+ if (!pm_runtime_get_if_in_use(ad5823->sd.dev))
+ return 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_FOCUS_ABSOLUTE:
+ ret = cci_write(ad5823->regmap, AD5823_VCM_CODE,
+ AD5823_VCM_CODE_RING_CTRL | ctrl->val, NULL);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ pm_runtime_put(ad5823->sd.dev);
+ return ret;
+}
+
+static const struct v4l2_ctrl_ops ad5823_ctrl_ops = {
+ .s_ctrl = ad5823_set_ctrl,
+};
+
+static int ad5823_power_down(struct ad5823_device *ad5823)
+{
+ return regulator_disable(ad5823->regulator);
+}
+
+static int ad5823_power_up(struct ad5823_device *ad5823, bool detect)
+{
+ u64 vcm_move_time, vcm_threshold;
+ int ret;
+
+ ret = regulator_enable(ad5823->regulator);
+ if (ret)
+ return ret;
+
+ cci_write(ad5823->regmap, AD5823_RESET, BIT(0), &ret);
+
+ if (detect) {
+ /* There is no id register, check for default reg values. */
+ cci_read(ad5823->regmap, AD5823_VCM_MOVE_TIME, &vcm_move_time, &ret);
+ cci_read(ad5823->regmap, AD5823_VCM_THRESHOLD, &vcm_threshold, &ret);
+
+ if (!ret && (vcm_move_time != AD5823_VCM_MOVE_TIME_DEFAULT ||
+ vcm_threshold != AD5823_VCM_THRESHOLD_DEFAULT)) {
+ dev_err(ad5823->sd.dev, "Failed to detect AD5823 got move-time 0x%02llx vcm-threshold 0x%02llx\n",
+ vcm_move_time, vcm_threshold);
+ ret = -ENXIO;
+ }
+ }
+
+ vcm_move_time = ad5823->resonance_period / AD5823_RESONANCE_COEF -
+ AD5823_RESONANCE_OFFSET;
+
+ dev_dbg(ad5823->sd.dev, "mode 0x%02x move-time 0x%02llx\n", ad5823->arc_mode, vcm_move_time);
+
+ cci_write(ad5823->regmap, AD5823_MODE, ad5823->arc_mode, &ret);
+ cci_write(ad5823->regmap, AD5823_VCM_MOVE_TIME, vcm_move_time, &ret);
+ if (ret)
+ ad5823_power_down(ad5823);
+
+ return ret;
+}
+
+static int ad5823_suspend(struct device *dev)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct ad5823_device *ad5823 = to_ad5823_device(sd);
+
+ return ad5823_power_down(ad5823);
+}
+
+static int ad5823_resume(struct device *dev)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct ad5823_device *ad5823 = to_ad5823_device(sd);
+
+ return ad5823_power_up(ad5823, false);
+}
+
+static int ad5823_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct ad5823_device *ad5823 = to_ad5823_device(sd);
+ int ret;
+
+ if (enable) {
+ ret = pm_runtime_resume_and_get(sd->dev);
+ if (ret < 0)
+ return ret;
+
+ /* Restore value of ctrls */
+ ret = v4l2_ctrl_handler_setup(&ad5823->ctrls.handler);
+ if (ret < 0)
+ pm_runtime_put(sd->dev);
+
+ return ret;
+ } else {
+ pm_runtime_put(sd->dev);
+ return 0;
+ }
+}
+
+static const struct v4l2_subdev_video_ops ad5823_video_ops = {
+ .s_stream = ad5823_s_stream,
+};
+
+static const struct v4l2_subdev_ops ad5823_ops = {
+ .video = &ad5823_video_ops,
+};
+
+static int ad5823_init_controls(struct ad5823_device *ad5823)
+{
+ const struct v4l2_ctrl_ops *ops = &ad5823_ctrl_ops;
+ int ret;
+
+ v4l2_ctrl_handler_init(&ad5823->ctrls.handler, 1);
+
+ ad5823->ctrls.focus = v4l2_ctrl_new_std(&ad5823->ctrls.handler, ops,
+ V4L2_CID_FOCUS_ABSOLUTE, 0,
+ AD5823_MAX_FOCUS_POS, 1, 0);
+
+ if (ad5823->ctrls.handler.error) {
+ dev_err(ad5823->sd.dev, "Error initialising v4l2 ctrls\n");
+ ret = ad5823->ctrls.handler.error;
+ goto err_free_handler;
+ }
+
+ ad5823->sd.ctrl_handler = &ad5823->ctrls.handler;
+ return 0;
+
+err_free_handler:
+ v4l2_ctrl_handler_free(&ad5823->ctrls.handler);
+ return ret;
+}
+
+static int ad5823_probe(struct i2c_client *client)
+{
+ struct ad5823_device *ad5823;
+ int ret;
+
+ ad5823 = devm_kzalloc(&client->dev, sizeof(*ad5823), GFP_KERNEL);
+ if (!ad5823)
+ return -ENOMEM;
+
+ ad5823->regmap = devm_cci_regmap_init_i2c(client, 8);
+ if (IS_ERR(ad5823->regmap))
+ return PTR_ERR(ad5823->regmap);
+
+ ad5823->arc_mode = AD5823_ARC_RES1;
+ ad5823->resonance_period = AD5823_RESONANCE_PERIOD;
+
+ /* Optional indication of ARC mode select */
+ device_property_read_u32(&client->dev, "adi,arc-mode",
+ &ad5823->arc_mode);
+
+ /* Optional indication of VCM resonance period */
+ device_property_read_u32(&client->dev, "adi,resonance-period",
+ &ad5823->resonance_period);
+
+ ad5823->regulator = devm_regulator_get(&client->dev, "vdd");
+ if (IS_ERR(ad5823->regulator))
+ return dev_err_probe(&client->dev, PTR_ERR(ad5823->regulator),
+ "getting regulator\n");
+
+ v4l2_i2c_subdev_init(&ad5823->sd, client, &ad5823_ops);
+ ad5823->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+ ret = ad5823_init_controls(ad5823);
+ if (ret)
+ return ret;
+
+ ret = media_entity_pads_init(&ad5823->sd.entity, 0, NULL);
+ if (ret < 0)
+ goto err_free_ctrl_handler;
+
+ ad5823->sd.entity.function = MEDIA_ENT_F_LENS;
+
+ /*
+ * We need the driver to work in the event that pm runtime is disable in
+ * the kernel, so power up and verify the chip now. In the event that
+ * runtime pm is disabled this will leave the chip on, so that the lens
+ * will work.
+ */
+
+ ret = ad5823_power_up(ad5823, true);
+ if (ret)
+ goto err_cleanup_media;
+
+ pm_runtime_set_active(&client->dev);
+ pm_runtime_get_noresume(&client->dev);
+ pm_runtime_enable(&client->dev);
+
+ ret = v4l2_async_register_subdev(&ad5823->sd);
+ if (ret < 0)
+ goto err_pm_runtime;
+
+ pm_runtime_set_autosuspend_delay(&client->dev, 1000);
+ pm_runtime_use_autosuspend(&client->dev);
+ pm_runtime_put_autosuspend(&client->dev);
+
+ return ret;
+
+err_pm_runtime:
+ pm_runtime_disable(&client->dev);
+ pm_runtime_put_noidle(&client->dev);
+ ad5823_power_down(ad5823);
+err_cleanup_media:
+ media_entity_cleanup(&ad5823->sd.entity);
+err_free_ctrl_handler:
+ v4l2_ctrl_handler_free(&ad5823->ctrls.handler);
+
+ return ret;
+}
+
+static void ad5823_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct ad5823_device *ad5823 =
+ container_of(sd, struct ad5823_device, sd);
+
+ v4l2_async_unregister_subdev(sd);
+ v4l2_ctrl_handler_free(&ad5823->ctrls.handler);
+ media_entity_cleanup(&ad5823->sd.entity);
+
+ pm_runtime_disable(&client->dev);
+ if (!pm_runtime_status_suspended(&client->dev))
+ ad5823_power_down(ad5823);
+ pm_runtime_set_suspended(&client->dev);
+}
+
+static const struct i2c_device_id ad5823_id_table[] = {
+ { "ad5823" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ad5823_id_table);
+
+static DEFINE_RUNTIME_DEV_PM_OPS(ad5823_pm_ops, ad5823_suspend, ad5823_resume,
+ NULL);
+
+static struct i2c_driver ad5823_i2c_driver = {
+ .driver = {
+ .name = "ad5823",
+ .pm = pm_sleep_ptr(&ad5823_pm_ops),
+ },
+ .probe = ad5823_probe,
+ .remove = ad5823_remove,
+ .id_table = ad5823_id_table,
+};
+module_i2c_driver(ad5823_i2c_driver);
+
+MODULE_AUTHOR("Hans de Goede <hansg@kernel.org>");
+MODULE_DESCRIPTION("AD5823 VCM Driver");
+MODULE_LICENSE("GPL");
Add a driver for the AD5823 VCM. The driver creates a v4l2 subdevice and registers a control to set the desired focus. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/media/i2c/Kconfig | 5 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/ad5823.c | 311 +++++++++++++++++++++++++++++++++++++ 3 files changed, 317 insertions(+) create mode 100644 drivers/media/i2c/ad5823.c