diff mbox series

Revert "arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash"

Message ID 20240830-revert_flash-v1-1-ad7057ea7e6e@apitzsch.eu
State New
Headers show
Series Revert "arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash" | expand

Commit Message

André Apitzsch via B4 Relay Aug. 30, 2024, 8:49 p.m. UTC
From: André Apitzsch <git@apitzsch.eu>

Patch "arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash" has
been applied twice. This reverts the older version of the patch.

Revert the commit f98bdb21cfc9 ("arm64: dts: qcom:
msm8939-longcheer-l9100: Add rear flash")

Fixes: f98bdb21cfc9 ("arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash")
Signed-off-by: André Apitzsch <git@apitzsch.eu>
---
 .../boot/dts/qcom/msm8939-longcheer-l9100.dts      | 26 ----------------------
 1 file changed, 26 deletions(-)


---
base-commit: d7b69f6e9e1c8b6acdcce3b385779eb046835dd5
change-id: 20240830-revert_flash-4e184591da15

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
index adc992ebc29d..b845da4fa23e 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
@@ -160,25 +160,6 @@  led@2 {
 		};
 	};
 
-	flash-led-controller@53 {
-		compatible = "silergy,sy7802";
-		reg = <0x53>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-0 = <&camera_rear_flash_default>;
-		pinctrl-names = "default";
-
-		led@0 {
-			reg = <0>;
-			function = LED_FUNCTION_FLASH;
-			color = <LED_COLOR_ID_WHITE>;
-			led-sources = <0>, <1>;
-		};
-	};
-
 	flash-led-controller@53 {
 		compatible = "silergy,sy7802";
 		reg = <0x53>;
@@ -364,13 +345,6 @@  camera_rear_flash_default: camera-rear-flash-default-state {
 		bias-disable;
 	};
 
-	camera_rear_flash_default: camera-rear-flash-default-state {
-		pins = "gpio9", "gpio16", "gpio51";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
 	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
 		pins = "gpio20";
 		function = "gpio";