@@ -56,6 +56,9 @@
#define IMX335_AGAIN_STEP 1
#define IMX335_AGAIN_DEFAULT 0
+/* Vertical flip */
+#define IMX335_REG_VREVERSE CCI_REG8(0x304f)
+
#define IMX335_REG_TPG_TESTCLKEN CCI_REG8(0x3148)
#define IMX335_REG_INCLKSEL1 CCI_REG16_LE(0x314c)
@@ -155,6 +158,8 @@ static const char * const imx335_supply_name[] = {
* @vblank_max: Maximum vertical blanking in lines
* @pclk: Sensor pixel clock
* @reg_list: Register list for sensor mode
+ * @vflip_normal: Register list vflip (normal readout)
+ * @vflip_inverted: Register list vflip (inverted readout)
*/
struct imx335_mode {
u32 width;
@@ -166,6 +171,8 @@ struct imx335_mode {
u32 vblank_max;
u64 pclk;
struct imx335_reg_list reg_list;
+ struct imx335_reg_list vflip_normal;
+ struct imx335_reg_list vflip_inverted;
};
/**
@@ -183,6 +190,7 @@ struct imx335_mode {
* @pclk_ctrl: Pointer to pixel clock control
* @hblank_ctrl: Pointer to horizontal blanking control
* @vblank_ctrl: Pointer to vertical blanking control
+ * @vflip: Pointer to vertical flip control
* @exp_ctrl: Pointer to exposure control
* @again_ctrl: Pointer to analog gain control
* @vblank: Vertical blanking in lines
@@ -207,6 +215,7 @@ struct imx335 {
struct v4l2_ctrl *pclk_ctrl;
struct v4l2_ctrl *hblank_ctrl;
struct v4l2_ctrl *vblank_ctrl;
+ struct v4l2_ctrl *vflip;
struct {
struct v4l2_ctrl *exp_ctrl;
struct v4l2_ctrl *again_ctrl;
@@ -259,7 +268,6 @@ static const struct cci_reg_sequence mode_2592x1944_regs[] = {
{ IMX335_REG_HTRIMMING_START, 48 },
{ IMX335_REG_HNUM, 2592 },
{ IMX335_REG_Y_OUT_SIZE, 1944 },
- { IMX335_REG_AREA3_ST_ADR_1, 176 },
{ IMX335_REG_AREA3_WIDTH_1, 3928 },
{ IMX335_REG_OPB_SIZE_V, 0 },
{ IMX335_REG_XVS_XHS_DRV, 0x00 },
@@ -333,6 +341,26 @@ static const struct cci_reg_sequence mode_2592x1944_regs[] = {
{ CCI_REG8(0x3a00), 0x00 },
};
+static const struct cci_reg_sequence mode_2592x1944_vflip_normal[] = {
+ { IMX335_REG_AREA3_ST_ADR_1, 176 },
+
+ /* Undocumented V-Flip related registers on Page 55 of datasheet. */
+ { CCI_REG8(0x3081), 0x02, },
+ { CCI_REG8(0x3083), 0x02, },
+ { CCI_REG16_LE(0x30b6), 0x00 },
+ { CCI_REG16_LE(0x3116), 0x08 },
+};
+
+static const struct cci_reg_sequence mode_2592x1944_vflip_inverted[] = {
+ { IMX335_REG_AREA3_ST_ADR_1, 4112 },
+
+ /* Undocumented V-Flip related registers on Page 55 of datasheet. */
+ { CCI_REG8(0x3081), 0xfe, },
+ { CCI_REG8(0x3083), 0xfe, },
+ { CCI_REG16_LE(0x30b6), 0x1fa },
+ { CCI_REG16_LE(0x3116), 0x002 },
+};
+
static const struct cci_reg_sequence raw10_framefmt_regs[] = {
{ IMX335_REG_ADBIT, 0x00 },
{ IMX335_REG_MDBIT, 0x00 },
@@ -419,6 +447,14 @@ static const struct imx335_mode supported_mode = {
.num_of_regs = ARRAY_SIZE(mode_2592x1944_regs),
.regs = mode_2592x1944_regs,
},
+ .vflip_normal = {
+ .num_of_regs = ARRAY_SIZE(mode_2592x1944_vflip_normal),
+ .regs = mode_2592x1944_vflip_normal,
+ },
+ .vflip_inverted = {
+ .num_of_regs = ARRAY_SIZE(mode_2592x1944_vflip_inverted),
+ .regs = mode_2592x1944_vflip_inverted,
+ },
};
/**
@@ -492,6 +528,26 @@ static int imx335_update_exp_gain(struct imx335 *imx335, u32 exposure, u32 gain)
return ret;
}
+static int imx335_update_vertical_flip(struct imx335 *imx335, u32 vflip)
+{
+ int ret = 0;
+
+ if (vflip)
+ cci_multi_reg_write(imx335->cci,
+ imx335->cur_mode->vflip_inverted.regs,
+ imx335->cur_mode->vflip_inverted.num_of_regs,
+ &ret);
+ else
+ cci_multi_reg_write(imx335->cci,
+ imx335->cur_mode->vflip_normal.regs,
+ imx335->cur_mode->vflip_normal.num_of_regs,
+ &ret);
+ if (ret)
+ return ret;
+
+ return cci_write(imx335->cci, IMX335_REG_VREVERSE, vflip, NULL);
+}
+
static int imx335_update_test_pattern(struct imx335 *imx335, u32 pattern_index)
{
int ret = 0;
@@ -584,6 +640,10 @@ static int imx335_set_ctrl(struct v4l2_ctrl *ctrl)
ret = imx335_update_exp_gain(imx335, exposure, analog_gain);
+ break;
+ case V4L2_CID_VFLIP:
+ ret = imx335_update_vertical_flip(imx335, ctrl->val);
+
break;
case V4L2_CID_TEST_PATTERN:
ret = imx335_update_test_pattern(imx335, ctrl->val);
@@ -1166,7 +1226,7 @@ static int imx335_init_controls(struct imx335 *imx335)
return ret;
/* v4l2_fwnode_device_properties can add two more controls */
- ret = v4l2_ctrl_handler_init(ctrl_hdlr, 9);
+ ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10);
if (ret)
return ret;
@@ -1201,6 +1261,13 @@ static int imx335_init_controls(struct imx335 *imx335)
v4l2_ctrl_cluster(2, &imx335->exp_ctrl);
+ imx335->vflip = v4l2_ctrl_new_std(ctrl_hdlr,
+ &imx335_ctrl_ops,
+ V4L2_CID_VFLIP,
+ 0, 1, 1, 0);
+ if (imx335->vflip)
+ imx335->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
+
imx335->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx335_ctrl_ops,
V4L2_CID_VBLANK,