diff mbox series

[v26,30/33] ALSA: usb-audio: qcom: Use card and PCM index from QMI request

Message ID 20240829194105.1504814-31-quic_wcheng@quicinc.com
State New
Headers show
Series Introduce QC USB SND audio offloading support | expand

Commit Message

Wesley Cheng Aug. 29, 2024, 7:41 p.m. UTC
Utilize the card and PCM index coming from the USB QMI stream request.
This field follows what is set by the ASoC USB backend, and could
potentially carry information about a specific device selected through the
ASoC USB backend.  The backend also has information about the last USB
sound device plugged in, so it can choose to select the last device plugged
in, accordingly.

Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
 sound/usb/qcom/qc_audio_offload.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

Comments

Pierre-Louis Bossart Aug. 30, 2024, 9:58 a.m. UTC | #1
On 8/29/24 21:41, Wesley Cheng wrote:
> Utilize the card and PCM index coming from the USB QMI stream request.
> This field follows what is set by the ASoC USB backend, and could
> potentially carry information about a specific device selected through the
> ASoC USB backend.  The backend also has information about the last USB
> sound device plugged in, so it can choose to select the last device plugged
> in, accordingly.
> 
> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
> ---
>  sound/usb/qcom/qc_audio_offload.c | 8 ++------
>  1 file changed, 2 insertions(+), 6 deletions(-)
> 
> diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c
> index 0bd533f539e4..a7ad15404fd1 100644
> --- a/sound/usb/qcom/qc_audio_offload.c
> +++ b/sound/usb/qcom/qc_audio_offload.c
> @@ -106,8 +106,6 @@ struct uaudio_qmi_dev {
>  	bool er_mapped;
>  	/* reference count to number of possible consumers */
>  	atomic_t qdev_in_use;
> -	/* idx to last udev card number plugged in */
> -	unsigned int last_card_num;
>  };
>  
>  struct uaudio_dev {
> @@ -1261,7 +1259,7 @@ static int prepare_qmi_response(struct snd_usb_substream *subs,
>  
>  	pcm_dev_num = (req_msg->usb_token & QMI_STREAM_REQ_DEV_NUM_MASK) >> 8;
>  	xfer_buf_len = req_msg->xfer_buff_size;
> -	card_num = uaudio_qdev->last_card_num;
> +	card_num = (req_msg->usb_token & QMI_STREAM_REQ_CARD_NUM_MASK) >> 16;
>  
>  	if (!uadev[card_num].ctrl_intf) {
>  		dev_err(&subs->dev->dev, "audio ctrl intf info not cached\n");
> @@ -1455,8 +1453,7 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
>  
>  	direction = (req_msg->usb_token & QMI_STREAM_REQ_DIRECTION);
>  	pcm_dev_num = (req_msg->usb_token & QMI_STREAM_REQ_DEV_NUM_MASK) >> 8;
> -	pcm_card_num = req_msg->enable ? uaudio_qdev->last_card_num :
> -				ffs(uaudio_qdev->card_slot) - 1;
> +	pcm_card_num = (req_msg->usb_token & QMI_STREAM_REQ_CARD_NUM_MASK) >> 16;
>  	if (pcm_card_num >= SNDRV_CARDS) {
>  		ret = -EINVAL;
>  		goto response;
> @@ -1706,7 +1703,6 @@ static void qc_usb_audio_offload_probe(struct snd_usb_audio *chip)
>  		sdev->card_idx = chip->card->number;
>  		sdev->chip_idx = chip->index;
>  
> -		uaudio_qdev->last_card_num = chip->card->number;
>  		snd_soc_usb_connect(usb_get_usb_backend(udev), sdev);
>  	}

This entire path seems like a bad split/merge, it removes stuff that was
done earlier. Also it's not clear what this has to do with 'QMI', card
and PCM device management is usually done at a higher level.

not following, please be mindful of reviewer fatigue when adding such
changes in patch 30/33....
Wesley Cheng Sept. 4, 2024, 7:46 p.m. UTC | #2
Hi Pierre,

On 8/30/2024 2:58 AM, Pierre-Louis Bossart wrote:
>
> On 8/29/24 21:41, Wesley Cheng wrote:
>> Utilize the card and PCM index coming from the USB QMI stream request.
>> This field follows what is set by the ASoC USB backend, and could
>> potentially carry information about a specific device selected through the
>> ASoC USB backend.  The backend also has information about the last USB
>> sound device plugged in, so it can choose to select the last device plugged
>> in, accordingly.
>>
>> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
>> ---
>>  sound/usb/qcom/qc_audio_offload.c | 8 ++------
>>  1 file changed, 2 insertions(+), 6 deletions(-)
>>
>> diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c
>> index 0bd533f539e4..a7ad15404fd1 100644
>> --- a/sound/usb/qcom/qc_audio_offload.c
>> +++ b/sound/usb/qcom/qc_audio_offload.c
>> @@ -106,8 +106,6 @@ struct uaudio_qmi_dev {
>>  	bool er_mapped;
>>  	/* reference count to number of possible consumers */
>>  	atomic_t qdev_in_use;
>> -	/* idx to last udev card number plugged in */
>> -	unsigned int last_card_num;
>>  };
>>  
>>  struct uaudio_dev {
>> @@ -1261,7 +1259,7 @@ static int prepare_qmi_response(struct snd_usb_substream *subs,
>>  
>>  	pcm_dev_num = (req_msg->usb_token & QMI_STREAM_REQ_DEV_NUM_MASK) >> 8;
>>  	xfer_buf_len = req_msg->xfer_buff_size;
>> -	card_num = uaudio_qdev->last_card_num;
>> +	card_num = (req_msg->usb_token & QMI_STREAM_REQ_CARD_NUM_MASK) >> 16;
>>  
>>  	if (!uadev[card_num].ctrl_intf) {
>>  		dev_err(&subs->dev->dev, "audio ctrl intf info not cached\n");
>> @@ -1455,8 +1453,7 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
>>  
>>  	direction = (req_msg->usb_token & QMI_STREAM_REQ_DIRECTION);
>>  	pcm_dev_num = (req_msg->usb_token & QMI_STREAM_REQ_DEV_NUM_MASK) >> 8;
>> -	pcm_card_num = req_msg->enable ? uaudio_qdev->last_card_num :
>> -				ffs(uaudio_qdev->card_slot) - 1;
>> +	pcm_card_num = (req_msg->usb_token & QMI_STREAM_REQ_CARD_NUM_MASK) >> 16;
>>  	if (pcm_card_num >= SNDRV_CARDS) {
>>  		ret = -EINVAL;
>>  		goto response;
>> @@ -1706,7 +1703,6 @@ static void qc_usb_audio_offload_probe(struct snd_usb_audio *chip)
>>  		sdev->card_idx = chip->card->number;
>>  		sdev->chip_idx = chip->index;
>>  
>> -		uaudio_qdev->last_card_num = chip->card->number;
>>  		snd_soc_usb_connect(usb_get_usb_backend(udev), sdev);
>>  	}
> This entire path seems like a bad split/merge, it removes stuff that was
> done earlier. Also it's not clear what this has to do with 'QMI', card
> and PCM device management is usually done at a higher level.
>
> not following, please be mindful of reviewer fatigue when adding such
> changes in patch 30/33....

I'll just add this as part of patch#28.  I think before I did the reordering of the series, this made a bit more sense to have as a patch on its own.  Now that the entire framework for the audio dsp to know about the card and pcm index is already done in previous patches, the plumbing is done for the qc_audio_offload to utilize the fields coming from the audio DSP, as they will carry valid values.

Thanks

Wesley Cheng
diff mbox series

Patch

diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c
index 0bd533f539e4..a7ad15404fd1 100644
--- a/sound/usb/qcom/qc_audio_offload.c
+++ b/sound/usb/qcom/qc_audio_offload.c
@@ -106,8 +106,6 @@  struct uaudio_qmi_dev {
 	bool er_mapped;
 	/* reference count to number of possible consumers */
 	atomic_t qdev_in_use;
-	/* idx to last udev card number plugged in */
-	unsigned int last_card_num;
 };
 
 struct uaudio_dev {
@@ -1261,7 +1259,7 @@  static int prepare_qmi_response(struct snd_usb_substream *subs,
 
 	pcm_dev_num = (req_msg->usb_token & QMI_STREAM_REQ_DEV_NUM_MASK) >> 8;
 	xfer_buf_len = req_msg->xfer_buff_size;
-	card_num = uaudio_qdev->last_card_num;
+	card_num = (req_msg->usb_token & QMI_STREAM_REQ_CARD_NUM_MASK) >> 16;
 
 	if (!uadev[card_num].ctrl_intf) {
 		dev_err(&subs->dev->dev, "audio ctrl intf info not cached\n");
@@ -1455,8 +1453,7 @@  static void handle_uaudio_stream_req(struct qmi_handle *handle,
 
 	direction = (req_msg->usb_token & QMI_STREAM_REQ_DIRECTION);
 	pcm_dev_num = (req_msg->usb_token & QMI_STREAM_REQ_DEV_NUM_MASK) >> 8;
-	pcm_card_num = req_msg->enable ? uaudio_qdev->last_card_num :
-				ffs(uaudio_qdev->card_slot) - 1;
+	pcm_card_num = (req_msg->usb_token & QMI_STREAM_REQ_CARD_NUM_MASK) >> 16;
 	if (pcm_card_num >= SNDRV_CARDS) {
 		ret = -EINVAL;
 		goto response;
@@ -1706,7 +1703,6 @@  static void qc_usb_audio_offload_probe(struct snd_usb_audio *chip)
 		sdev->card_idx = chip->card->number;
 		sdev->chip_idx = chip->index;
 
-		uaudio_qdev->last_card_num = chip->card->number;
 		snd_soc_usb_connect(usb_get_usb_backend(udev), sdev);
 	}