| Message ID | 20240828142554.2424189-2-andriy.shevchenko@linux.intel.com |
|---|---|
| State | New |
| Headers | show |
| Series | gpiolib:legacy: Kill GPIOF_DIR_* and GPIOF_INIT_* | expand |
On Wed, Aug 28, 2024 at 4:26 PM Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote: > Besides the fact that (old) drivers use wrong definitions, e.g., > GPIOF_INIT_HIGH instead of GPIOF_OUT_INIT_HIGH, shrink the legacy > definitions by killing those GPIOF_INIT_* completely. > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Excellent, thanks Andy. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 9471938df64c..02c5a4724192 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -76,8 +76,7 @@ static int vision_lcd_setup(struct platform_device *pdev) { int err; - err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH, - dev_name(&pdev->dev)); + err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, dev_name(&pdev->dev)); if (err) return err; diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 99f321b6e417..9cc8fbf218a5 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -42,7 +42,7 @@ static struct board_info __initdata board_cvg834g = { .expected_cpu_id = 0x3368, .ephy_reset_gpio = 36, - .ephy_reset_gpio_flags = GPIOF_INIT_HIGH, + .ephy_reset_gpio_flags = GPIOF_OUT_INIT_HIGH, .has_pci = 1, .has_uart0 = 1, .has_uart1 = 1, diff --git a/drivers/gpio/gpiolib-legacy.c b/drivers/gpio/gpiolib-legacy.c index d27142418f9f..51d5fe203111 100644 --- a/drivers/gpio/gpiolib-legacy.c +++ b/drivers/gpio/gpiolib-legacy.c @@ -46,8 +46,7 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) if (flags & GPIOF_DIR_IN) err = gpiod_direction_input(desc); else - err = gpiod_direction_output_raw(desc, - (flags & GPIOF_INIT_HIGH) ? 1 : 0); + err = gpiod_direction_output_raw(desc, !!(flags & GPIOF_OUT_INIT_HIGH)); if (err) goto free_gpio; diff --git a/include/linux/gpio.h b/include/linux/gpio.h index 063f71b18a7c..4af8ad114557 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -20,12 +20,9 @@ struct device; #define GPIOF_DIR_OUT (0 << 0) #define GPIOF_DIR_IN (1 << 0) -#define GPIOF_INIT_LOW (0 << 1) -#define GPIOF_INIT_HIGH (1 << 1) - #define GPIOF_IN (GPIOF_DIR_IN) -#define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | GPIOF_INIT_LOW) -#define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH) +#define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | (0 << 1)) +#define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | (1 << 1)) /* Gpio pin is active-low */ #define GPIOF_ACTIVE_LOW (1 << 2)
Besides the fact that (old) drivers use wrong definitions, e.g., GPIOF_INIT_HIGH instead of GPIOF_OUT_INIT_HIGH, shrink the legacy definitions by killing those GPIOF_INIT_* completely. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- arch/arm/mach-ep93xx/vision_ep9307.c | 3 +-- arch/mips/bcm63xx/boards/board_bcm963xx.c | 2 +- drivers/gpio/gpiolib-legacy.c | 3 +-- include/linux/gpio.h | 7 ++----- 4 files changed, 5 insertions(+), 10 deletions(-)