diff mbox series

[07/16] reset: rzg2l-usbphy-ctrl: Get reset control array

Message ID 20240822152801.602318-8-claudiu.beznea.uj@bp.renesas.com
State New
Headers show
Series Add initial USB support for the Renesas RZ/G3S SoC | expand

Commit Message

Claudiu Aug. 22, 2024, 3:27 p.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Before accessing the USB area of the RZ/G3S SoC the PWRRDY bit of the
SYS_USB_PWRRDY register need to be cleared. When USB area is not used the
PWRRDY bit of the SYS_USB_PWRRDY register need to be set. This register is
in the SYSC controller address space and the assert/de-assert of the
signal handled by SYSC_USB_PWRRDY was implemented as a reset signal.

The USB modules available on the RZ/G3S SoC that need this bit set are:
- USB ch0 (supporting host and peripheral mode)
- USB ch2 (supporting host mode)
- USBPHY control

As the USBPHY control is the root device for all the other USB channels
(USB ch0, USB ch1) add support to set the PWRRDY for the USB area when
initializing the USBPHY control. As this is done though reset signals
get the reset array in the USBPHY control driver.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
 drivers/reset/reset-rzg2l-usbphy-ctrl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Geert Uytterhoeven Oct. 8, 2024, 2:46 p.m. UTC | #1 
On Thu, Aug 22, 2024 at 5:28 PM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Before accessing the USB area of the RZ/G3S SoC the PWRRDY bit of the
> SYS_USB_PWRRDY register need to be cleared. When USB area is not used the
> PWRRDY bit of the SYS_USB_PWRRDY register need to be set. This register is
> in the SYSC controller address space and the assert/de-assert of the
> signal handled by SYSC_USB_PWRRDY was implemented as a reset signal.
>
> The USB modules available on the RZ/G3S SoC that need this bit set are:
> - USB ch0 (supporting host and peripheral mode)
> - USB ch2 (supporting host mode)
> - USBPHY control
>
> As the USBPHY control is the root device for all the other USB channels
> (USB ch0, USB ch1) add support to set the PWRRDY for the USB area when
> initializing the USBPHY control. As this is done though reset signals
> get the reset array in the USBPHY control driver.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
index 1cd157f4f03b..8b64c12f3bec 100644
--- a/drivers/reset/reset-rzg2l-usbphy-ctrl.c
+++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
@@ -132,7 +132,7 @@  static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev)
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-	priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	priv->rstc = devm_reset_control_array_get_exclusive(&pdev->dev);
 	if (IS_ERR(priv->rstc))
 		return dev_err_probe(dev, PTR_ERR(priv->rstc),
 				     "failed to get reset\n");