| Message ID | PH7PR07MB95388A2D2A3EB3C26E83710FDD8E2@PH7PR07MB9538.namprd07.prod.outlook.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] usb: xhci: fixes lost of data for xHCI Cadence Controllers | expand |
Hi, > Field Rsvd0 is reserved field, so patch should not have impact for > other xHCI controllers. Wait, is this a case of Linux failing to zero-initialize something that should be zero initialized before use (why not explain it as such?), or are you suggesting monkeying with internal xHC data at run time, in area which is known to actually be used by at least one implementation? There is no mention of Rsvd0 in the xHCI spec, did you mean RsvdO? Reserved and Opaque, For exclusive use by the xHC. Software shall *not* write this, unless allowed by the vendor. Cadence isn't the only xHC vendor... (There is no mention of "Stream Endpoint Context" either, so maybe you meant "Stream Context" or "Endpoint Context"...) Regards, Michal
On 30.8.2024 18.45, Michał Pecio wrote: > Hi, > >> Field Rsvd0 is reserved field, so patch should not have impact for >> other xHCI controllers. > Wait, is this a case of Linux failing to zero-initialize something that > should be zero initialized before use (why not explain it as such?), or > are you suggesting monkeying with internal xHC data at run time, in area > which is known to actually be used by at least one implementation? > Patch is monkeying with internal xHC RsvdO field. > There is no mention of Rsvd0 in the xHCI spec, did you mean RsvdO? > > Reserved and Opaque, > For exclusive use by the xHC. > Software shall *not* write this, unless allowed by the vendor. > > Cadence isn't the only xHC vendor... > Makes sense, Pawel Laszczak, could you make this patch Cadence specific. Thanks Mathias
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 1dde53f6eb31..e5e1d665adab 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1386,6 +1386,16 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id, struct xhci_stream_ctx *ctx = &ep->stream_info->stream_ctx_array[stream_id]; deq = le64_to_cpu(ctx->stream_ring) & SCTX_DEQ_MASK; + + /* + * Existing Cadence xHCI controllers store some endpoint state information + * within Rsvd0 fields of Stream Endpoint context. This field is not + * cleared during Set TR Dequeue Pointer command which causes XDMA to skip + * over transfer ring and leads to data loss on stream pipe. + * To fix this issue driver must clear Rsvd0 field. + */ + ctx->reserved[0] = 0; + ctx->reserved[1] = 0; } else { deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK; }
Stream endpoint can skip part of TD during next transfer initialization after beginning stopped during active stream data transfer. The Set TR Dequeue Pointer command does not clear all internal transfer-related variables that position stream endpoint on transfer ring. USB Controller stores all endpoint state information within RsvdO fields inside endpoint context structure. For stream endpoints, all relevant information regarding particular StreamID is stored within corresponding Stream Endpoint context. Whenever driver wants to stop stream endpoint traffic, it invokes Stop Endpoint command which forces the controller to dump all endpoint state-related variables into RsvdO spaces into endpoint context and stream endpoint context. Whenever driver wants to reinitialize endpoint starting point on Transfer Ring, it uses the Set TR Dequeue Pointer command to update dequeue pointer for particular stream in Stream Endpoint Context. When stream endpoint is forced to stop active transfer in the middle of TD, it dumps an information about TRB bytes left in RsvdO fields in Stream Endpoint Context which will be used in next transfer initialization to designate starting point for XDMA. This field is not cleared during Set TR Dequeue Pointer command which causes XDMA to skip over transfer ring and leads to data loss on stream pipe. Patch fixes this by clearing out all RsvdO fields before initializing new transfer via that StreamID. Field Rsvd0 is reserved field, so patch should not have impact for other xHCI controllers. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <stable@vger.kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> --- Changelog: v2: - removed restoring of EDTLA field drivers/usb/host/xhci-ring.c | 10 ++++++++++ 1 file changed, 10 insertions(+)