[v2,1/1] dt-bindings: leds: convert leds-lm3692x to yaml format

Convert binding doc leds-lm3592x to yaml format.
Additional change
- Add ref to common.yaml for child node
- Add i2c node at example

Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: /soc@0/bus@30800000/i2c@30a40000/backlight@36:
	failed to match any schema with compatible: ['ti,lm36922']

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v1 to v2
- fix dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/leds/ti.lm36922.example.dtb: /example-0/i2c/led-controller@36: failed to match any schema with compatible: ['ti,lm3692x']
---
 .../devicetree/bindings/leds/leds-lm3692x.txt |  65 ------------
 .../devicetree/bindings/leds/ti.lm36922.yaml  | 100 ++++++++++++++++++
 2 files changed, 100 insertions(+), 65 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-lm3692x.txt
 create mode 100644 Documentation/devicetree/bindings/leds/ti.lm36922.yaml

On Tue, Aug 20, 2024 at 02:35:43PM -0400, Frank Li wrote:
> Convert binding doc leds-lm3592x to yaml format.
> Additional change
> - Add ref to common.yaml for child node
> - Add i2c node at example
> 
> Fix below warning:
> arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: /soc@0/bus@30800000/i2c@30a40000/backlight@36:
> 	failed to match any schema with compatible: ['ti,lm36922']
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> diff --git a/Documentation/devicetree/bindings/leds/ti.lm36922.yaml b/Documentation/devicetree/bindings/leds/ti.lm36922.yaml
> new file mode 100644
> index 0000000000000..ac98547b78bd2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/ti.lm36922.yaml
> @@ -0,0 +1,100 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/ti.lm36922.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments - LM3692x Highly Efficient White LED Driver
> +
> +maintainers:
> +  - Dan Murphy <dmurphy@ti.com>
> +
> +description: |
> +  The LM3692x is an ultra-compact, highly efficient,
> +  white-LED driver designed for LCD display backlighting.
> +
> +  The main difference between the LM36922 and LM36923 is the number of
> +  LED strings it supports. The LM36922 supports two strings while the LM36923
> +  supports three strings.
> +
> +  For more product information please see the link below:
> +  https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,lm36922
> +      - ti,lm36923
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  enable-gpios:
> +    description: gpio pin to enable/disable the device.

I think the description could be replaced with just marking the property
as "true", both here and for the supply. The descriptions are statements
of the obvious.

> +
> +  vled-supply:
> +    description: LED supply
> +
> +  ti,ovp-microvolt:
> +    description: Overvoltage protection.
> +    default: 29000000
> +    enum: [17000000, 21000000, 25000000, 29000000]
> +
> +patternProperties:
> +  '^led@[0-9a-f]+$':

There's no need for such a permissive pattern here, since reg is limited
to the range 0-3. Additionally, I would add an
allOf:
  - if:
      properties:
        compatible:
          contains:
            const: ti,lm36922
    then:
      properties:
        led@3: false

or similar to restrict the third entry instead of doing so in prose.

Thanks,
Conor.

> +    type: object
> +    $ref: common.yaml
> +    properties:
> +      reg:
> +        enum: [0, 1, 2, 3]
> +        description: |
> +          0 - Will enable all LED sync paths
> +          1 - Will enable the LED1 sync
> +          2 - Will enable the LED2 sync
> +          3 - Will enable the LED3 sync (LM36923 only)
> +
> +    unevaluatedProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/leds/common.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        led-controller@36 {
> +            compatible = "ti,lm36922";
> +            reg = <0x36>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> +            vled-supply = <&vbatt>;
> +            ti,ovp-microvolt = <29000000>;
> +
> +            led@0 {
> +                reg = <0>;
> +                function = LED_FUNCTION_BACKLIGHT;
> +                color = <LED_COLOR_ID_WHITE>;
> +                linux,default-trigger = "backlight";
> +                led-max-microamp = <20000>;
> +            };
> +        };
> +    };
> +
> -- 
> 2.34.1
>

On Wed, Aug 21, 2024 at 04:15:34PM +0100, Conor Dooley wrote:
> On Tue, Aug 20, 2024 at 02:35:43PM -0400, Frank Li wrote:
> > Convert binding doc leds-lm3592x to yaml format.
> > Additional change
> > - Add ref to common.yaml for child node
> > - Add i2c node at example
> >
> > Fix below warning:
> > arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: /soc@0/bus@30800000/i2c@30a40000/backlight@36:
> > 	failed to match any schema with compatible: ['ti,lm36922']
> >
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > diff --git a/Documentation/devicetree/bindings/leds/ti.lm36922.yaml b/Documentation/devicetree/bindings/leds/ti.lm36922.yaml
> > new file mode 100644
> > index 0000000000000..ac98547b78bd2
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/ti.lm36922.yaml
> > @@ -0,0 +1,100 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/ti.lm36922.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Texas Instruments - LM3692x Highly Efficient White LED Driver
> > +
> > +maintainers:
> > +  - Dan Murphy <dmurphy@ti.com>
> > +
> > +description: |
> > +  The LM3692x is an ultra-compact, highly efficient,
> > +  white-LED driver designed for LCD display backlighting.
> > +
> > +  The main difference between the LM36922 and LM36923 is the number of
> > +  LED strings it supports. The LM36922 supports two strings while the LM36923
> > +  supports three strings.
> > +
> > +  For more product information please see the link below:
> > +  https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - ti,lm36922
> > +      - ti,lm36923
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  "#address-cells":
> > +    const: 1
> > +
> > +  "#size-cells":
> > +    const: 0
> > +
> > +  enable-gpios:
> > +    description: gpio pin to enable/disable the device.
>
> I think the description could be replaced with just marking the property
> as "true", both here and for the supply. The descriptions are statements
> of the obvious.
>
> > +
> > +  vled-supply:
> > +    description: LED supply
> > +
> > +  ti,ovp-microvolt:
> > +    description: Overvoltage protection.
> > +    default: 29000000
> > +    enum: [17000000, 21000000, 25000000, 29000000]
> > +
> > +patternProperties:
> > +  '^led@[0-9a-f]+$':
>
> There's no need for such a permissive pattern here, since reg is limited

I am confused about it.  I think it at least need led@X pattern. Do
you means
   '^led@[0-3]+$'

Frank

> to the range 0-3. Additionally, I would add an
> allOf:
>   - if:
>       properties:
>         compatible:
>           contains:
>             const: ti,lm36922
>     then:
>       properties:
>         led@3: false
>
> or similar to restrict the third entry instead of doing so in prose.
>
> Thanks,
> Conor.
>
> > +    type: object
> > +    $ref: common.yaml
> > +    properties:
> > +      reg:
> > +        enum: [0, 1, 2, 3]
> > +        description: |
> > +          0 - Will enable all LED sync paths
> > +          1 - Will enable the LED1 sync
> > +          2 - Will enable the LED2 sync
> > +          3 - Will enable the LED3 sync (LM36923 only)
> > +
> > +    unevaluatedProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - "#address-cells"
> > +  - "#size-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +    #include <dt-bindings/leds/common.h>
> > +
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        led-controller@36 {
> > +            compatible = "ti,lm36922";
> > +            reg = <0x36>;
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> > +            vled-supply = <&vbatt>;
> > +            ti,ovp-microvolt = <29000000>;
> > +
> > +            led@0 {
> > +                reg = <0>;
> > +                function = LED_FUNCTION_BACKLIGHT;
> > +                color = <LED_COLOR_ID_WHITE>;
> > +                linux,default-trigger = "backlight";
> > +                led-max-microamp = <20000>;
> > +            };
> > +        };
> > +    };
> > +
> > --
> > 2.34.1
> >

On Wed, Aug 21, 2024 at 12:37:18PM -0400, Frank Li wrote:
> On Wed, Aug 21, 2024 at 04:15:34PM +0100, Conor Dooley wrote:
> > On Tue, Aug 20, 2024 at 02:35:43PM -0400, Frank Li wrote:
> > > Convert binding doc leds-lm3592x to yaml format.
> > > Additional change
> > > - Add ref to common.yaml for child node
> > > - Add i2c node at example
> > >
> > > Fix below warning:
> > > arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: /soc@0/bus@30800000/i2c@30a40000/backlight@36:
> > > 	failed to match any schema with compatible: ['ti,lm36922']
> > >
> > > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > > diff --git a/Documentation/devicetree/bindings/leds/ti.lm36922.yaml b/Documentation/devicetree/bindings/leds/ti.lm36922.yaml
> > > new file mode 100644
> > > index 0000000000000..ac98547b78bd2
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/leds/ti.lm36922.yaml
> > > @@ -0,0 +1,100 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/leds/ti.lm36922.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Texas Instruments - LM3692x Highly Efficient White LED Driver
> > > +
> > > +maintainers:
> > > +  - Dan Murphy <dmurphy@ti.com>
> > > +
> > > +description: |
> > > +  The LM3692x is an ultra-compact, highly efficient,
> > > +  white-LED driver designed for LCD display backlighting.
> > > +
> > > +  The main difference between the LM36922 and LM36923 is the number of
> > > +  LED strings it supports. The LM36922 supports two strings while the LM36923
> > > +  supports three strings.
> > > +
> > > +  For more product information please see the link below:
> > > +  https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
> > > +
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +      - ti,lm36922
> > > +      - ti,lm36923
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  "#address-cells":
> > > +    const: 1
> > > +
> > > +  "#size-cells":
> > > +    const: 0
> > > +
> > > +  enable-gpios:
> > > +    description: gpio pin to enable/disable the device.
> >
> > I think the description could be replaced with just marking the property
> > as "true", both here and for the supply. The descriptions are statements
> > of the obvious.
> >
> > > +
> > > +  vled-supply:
> > > +    description: LED supply
> > > +
> > > +  ti,ovp-microvolt:
> > > +    description: Overvoltage protection.
> > > +    default: 29000000
> > > +    enum: [17000000, 21000000, 25000000, 29000000]
> > > +
> > > +patternProperties:
> > > +  '^led@[0-9a-f]+$':
> >
> > There's no need for such a permissive pattern here, since reg is limited
> 
> I am confused about it.  I think it at least need led@X pattern. Do
> you means
>    '^led@[0-3]+$'

Yeah, that is what I meant - not that the pattern should be removed.
The + I don't think you should have though, only a single digit is
possible.

> 
> Frank
> 
> > to the range 0-3. Additionally, I would add an
> > allOf:
> >   - if:
> >       properties:
> >         compatible:
> >           contains:
> >             const: ti,lm36922
> >     then:
> >       properties:
> >         led@3: false
> >
> > or similar to restrict the third entry instead of doing so in prose.
> >
> > Thanks,
> > Conor.
> >
> > > +    type: object
> > > +    $ref: common.yaml
> > > +    properties:
> > > +      reg:
> > > +        enum: [0, 1, 2, 3]
> > > +        description: |
> > > +          0 - Will enable all LED sync paths
> > > +          1 - Will enable the LED1 sync
> > > +          2 - Will enable the LED2 sync
> > > +          3 - Will enable the LED3 sync (LM36923 only)
> > > +
> > > +    unevaluatedProperties: false
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - "#address-cells"
> > > +  - "#size-cells"
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    #include <dt-bindings/gpio/gpio.h>
> > > +    #include <dt-bindings/leds/common.h>
> > > +
> > > +    i2c {
> > > +        #address-cells = <1>;
> > > +        #size-cells = <0>;
> > > +
> > > +        led-controller@36 {
> > > +            compatible = "ti,lm36922";
> > > +            reg = <0x36>;
> > > +            #address-cells = <1>;
> > > +            #size-cells = <0>;
> > > +
> > > +            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> > > +            vled-supply = <&vbatt>;
> > > +            ti,ovp-microvolt = <29000000>;
> > > +
> > > +            led@0 {
> > > +                reg = <0>;
> > > +                function = LED_FUNCTION_BACKLIGHT;
> > > +                color = <LED_COLOR_ID_WHITE>;
> > > +                linux,default-trigger = "backlight";
> > > +                led-max-microamp = <20000>;
> > > +            };
> > > +        };
> > > +    };
> > > +
> > > --
> > > 2.34.1
> > >
> 
>