diff mbox series

[v3,26/27] stm32mp: compute ram_top based on the optee base address

Message ID 20240821105839.2870293-27-sughosh.ganu@linaro.org
State Superseded
Headers show
Series Make LMB memory map global and persistent | expand

Commit Message

Sughosh Ganu Aug. 21, 2024, 10:58 a.m. UTC
The value of ram_top address currently gets computed in an indirect
manner. The boot_fdt_add_mem_rsv_regions() function gets called first
to reserve the memory region occupied by OP-TEE in the LMB memory
map. This is followed by a call to the lmb_alloc() API, which returns
an address which is below the OP-TEE base address. This address is the
value of ram_top returned by the board_get_usable_ram_top() function.

This has now changed, as the LMB memory map, which is no longer local,
gets set up after relocation. Get the OP-TEE base address by reading
the device tree, and set the ram_top from this value.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
---
Changes since V2: None

 arch/arm/mach-stm32mp/dram_init.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-stm32mp/dram_init.c b/arch/arm/mach-stm32mp/dram_init.c
index b3dbd521b7..32baefca71 100644
--- a/arch/arm/mach-stm32mp/dram_init.c
+++ b/arch/arm/mach-stm32mp/dram_init.c
@@ -62,8 +62,10 @@  int dram_init(void)
 
 phys_addr_t board_get_usable_ram_top(phys_size_t total_size)
 {
+	int ret;
 	phys_size_t size;
 	phys_addr_t reg;
+	u32 optee_start, optee_size;
 
 	if (!total_size)
 		return gd->ram_top;
@@ -73,16 +75,10 @@  phys_addr_t board_get_usable_ram_top(phys_size_t total_size)
 	 * if the effective available memory is bigger
 	 */
 	gd->ram_top = clamp_val(gd->ram_top, 0, SZ_4G - 1);
+	size = ALIGN(SZ_8M + CONFIG_SYS_MALLOC_LEN + total_size, MMU_SECTION_SIZE);
 
-	/* found enough not-reserved memory to relocated U-Boot */
-	lmb_add(gd->ram_base, gd->ram_top - gd->ram_base);
-	boot_fdt_add_mem_rsv_regions((void *)gd->fdt_blob);
-	/* add 8M for reserved memory for display, fdt, gd,... */
-	size = ALIGN(SZ_8M + CONFIG_SYS_MALLOC_LEN + total_size, MMU_SECTION_SIZE),
-	reg = lmb_alloc(size, MMU_SECTION_SIZE);
-
-	if (!reg)
-		reg = gd->ram_top - size;
+	ret = optee_get_reserved_memory(&optee_start, &optee_size);
+	reg = (!ret ? optee_start : gd->ram_top) - size;
 
 	/* before relocation, mark the U-Boot memory as cacheable by default */
 	if (!(gd->flags & GD_FLG_RELOC))