| Message ID | 20240820230037.1859088-1-caleb.connolly@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | board/qualcomm: add debug config fragments for some SoCs | expand |
On 21/08/2024 01:00, Caleb Connolly wrote: > We already have some documentation describing how to enable debug UART > for Qualcomm SoCs. However the UART address varies per-soc... Add some > config fragments to enable debug UART for few well supported SoCs. > > These can be used like: > > $ make qcom_defconfig debug-sdm845.config > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> > --- > board/qualcomm/debug-sdm845.config | 5 +++++ > board/qualcomm/debug-sm6115.config | 5 +++++ > board/qualcomm/debug-sm8250.config | 5 +++++ > 3 files changed, 15 insertions(+) > create mode 100644 board/qualcomm/debug-sdm845.config > create mode 100644 board/qualcomm/debug-sm6115.config > create mode 100644 board/qualcomm/debug-sm8250.config > > diff --git a/board/qualcomm/debug-sdm845.config b/board/qualcomm/debug-sdm845.config > new file mode 100644 > index 000000000000..31ad6d02a3a7 > --- /dev/null > +++ b/board/qualcomm/debug-sdm845.config > @@ -0,0 +1,5 @@ > +CONFIG_DEBUG_UART=y > +CONFIG_DEBUG_UART_ANNOUNCE=y > +CONFIG_DEBUG_UART_BASE=0xa84000 > +CONFIG_DEBUG_UART_MSM_GENI=y > +CONFIG_DEBUG_UART_CLOCK=7372800 > diff --git a/board/qualcomm/debug-sm6115.config b/board/qualcomm/debug-sm6115.config > new file mode 100644 > index 000000000000..131c6e230de8 > --- /dev/null > +++ b/board/qualcomm/debug-sm6115.config > @@ -0,0 +1,5 @@ > +CONFIG_DEBUG_UART=y > +CONFIG_DEBUG_UART_ANNOUNCE=y > +CONFIG_DEBUG_UART_BASE=0x4a90000 > +CONFIG_DEBUG_UART_MSM_GENI=y > +CONFIG_DEBUG_UART_CLOCK=14745600 > diff --git a/board/qualcomm/debug-sm8250.config b/board/qualcomm/debug-sm8250.config > new file mode 100644 > index 000000000000..4d3cc4cc97f4 > --- /dev/null > +++ b/board/qualcomm/debug-sm8250.config > @@ -0,0 +1,5 @@ > +CONFIG_DEBUG_UART=y > +CONFIG_DEBUG_UART_ANNOUNCE=y > +CONFIG_DEBUG_UART_BASE=0xa90000 > +CONFIG_DEBUG_UART_MSM_GENI=y > +CONFIG_DEBUG_UART_CLOCK=14745600 Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff --git a/board/qualcomm/debug-sdm845.config b/board/qualcomm/debug-sdm845.config new file mode 100644 index 000000000000..31ad6d02a3a7 --- /dev/null +++ b/board/qualcomm/debug-sdm845.config @@ -0,0 +1,5 @@ +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_BASE=0xa84000 +CONFIG_DEBUG_UART_MSM_GENI=y +CONFIG_DEBUG_UART_CLOCK=7372800 diff --git a/board/qualcomm/debug-sm6115.config b/board/qualcomm/debug-sm6115.config new file mode 100644 index 000000000000..131c6e230de8 --- /dev/null +++ b/board/qualcomm/debug-sm6115.config @@ -0,0 +1,5 @@ +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_BASE=0x4a90000 +CONFIG_DEBUG_UART_MSM_GENI=y +CONFIG_DEBUG_UART_CLOCK=14745600 diff --git a/board/qualcomm/debug-sm8250.config b/board/qualcomm/debug-sm8250.config new file mode 100644 index 000000000000..4d3cc4cc97f4 --- /dev/null +++ b/board/qualcomm/debug-sm8250.config @@ -0,0 +1,5 @@ +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_BASE=0xa90000 +CONFIG_DEBUG_UART_MSM_GENI=y +CONFIG_DEBUG_UART_CLOCK=14745600
We already have some documentation describing how to enable debug UART for Qualcomm SoCs. However the UART address varies per-soc... Add some config fragments to enable debug UART for few well supported SoCs. These can be used like: $ make qcom_defconfig debug-sdm845.config Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> --- board/qualcomm/debug-sdm845.config | 5 +++++ board/qualcomm/debug-sm6115.config | 5 +++++ board/qualcomm/debug-sm8250.config | 5 +++++ 3 files changed, 15 insertions(+) create mode 100644 board/qualcomm/debug-sdm845.config create mode 100644 board/qualcomm/debug-sm6115.config create mode 100644 board/qualcomm/debug-sm8250.config