diff mbox series

[7/8] iio: adc: ad7606: Switch to xxx_get_device_match_data

Message ID 20240815-ad7606_add_iio_backend_support-v1-7-cea3e11b1aa4@baylibre.com
State New
Headers show
Series Add iio backend compatibility for ad7606 | expand

Commit Message

Guillaume Stols Aug. 15, 2024, 12:12 p.m. UTC 
On the parallel version, the current implementation is only compatible
with id tables and won't work with fx_nodes. So in this commit, the goal
is to switch to use get_device_match_data, in order to simplify the
logic of retrieving chip data.

Also, chip info is moved in the .h file so to be accessible to all the
driver files that can set a pointer to the corresponding chip as the
driver data.

Signed-off-by: Guillaume Stols <gstols@baylibre.com>
---
 drivers/iio/adc/ad7606.c     | 106 ++--------------------------------
 drivers/iio/adc/ad7606.h     | 132 ++++++++++++++++++++++++++++++++++++++++---
 drivers/iio/adc/ad7606_par.c |  22 ++++----
 drivers/iio/adc/ad7606_spi.c |  31 +++++-----
 4 files changed, 154 insertions(+), 137 deletions(-)

Comments

Jonathan Cameron Aug. 17, 2024, 3:33 p.m. UTC | #1 
On Thu, 15 Aug 2024 12:12:01 +0000
Guillaume Stols <gstols@baylibre.com> wrote:

> On the parallel version, the current implementation is only compatible
> with id tables and won't work with fx_nodes. So in this commit, the goal
> is to switch to use get_device_match_data, in order to simplify the
> logic of retrieving chip data.
> 
> Also, chip info is moved in the .h file so to be accessible to all the
> driver files that can set a pointer to the corresponding chip as the
> driver data.

This means each driver gets their own copy.

Better to use an extern in the header and keep the actual data
in the core module.

Otherwise LGTM.
diff mbox series

Patch

diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index 2c9ddcd0ad77..99d5ca5c2348 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -43,14 +43,6 @@  static const unsigned int ad7616_sw_scale_avail[3] = {
 	76293, 152588, 305176
 };
 
-static const unsigned int ad7606_oversampling_avail[7] = {
-	1, 2, 4, 8, 16, 32, 64,
-};
-
-static const unsigned int ad7616_oversampling_avail[8] = {
-	1, 2, 4, 8, 16, 32, 64, 128,
-};
-
 static int ad7606_reset(struct ad7606_state *st)
 {
 	if (st->gpio_reset) {
@@ -415,96 +407,6 @@  static const struct attribute_group ad7606_attribute_group_range = {
 	.attrs = ad7606_attributes_range,
 };
 
-static const struct iio_chan_spec ad7605_channels[] = {
-	IIO_CHAN_SOFT_TIMESTAMP(4),
-	AD7605_CHANNEL(0),
-	AD7605_CHANNEL(1),
-	AD7605_CHANNEL(2),
-	AD7605_CHANNEL(3),
-};
-
-static const struct iio_chan_spec ad7606_channels[] = {
-	IIO_CHAN_SOFT_TIMESTAMP(8),
-	AD7606_CHANNEL(0),
-	AD7606_CHANNEL(1),
-	AD7606_CHANNEL(2),
-	AD7606_CHANNEL(3),
-	AD7606_CHANNEL(4),
-	AD7606_CHANNEL(5),
-	AD7606_CHANNEL(6),
-	AD7606_CHANNEL(7),
-};
-
-/*
- * The current assumption that this driver makes for AD7616, is that it's
- * working in Hardware Mode with Serial, Burst and Sequencer modes activated.
- * To activate them, following pins must be pulled high:
- *	-SER/PAR
- *	-SEQEN
- * And following pins must be pulled low:
- *	-WR/BURST
- *	-DB4/SER1W
- */
-static const struct iio_chan_spec ad7616_channels[] = {
-	IIO_CHAN_SOFT_TIMESTAMP(16),
-	AD7606_CHANNEL(0),
-	AD7606_CHANNEL(1),
-	AD7606_CHANNEL(2),
-	AD7606_CHANNEL(3),
-	AD7606_CHANNEL(4),
-	AD7606_CHANNEL(5),
-	AD7606_CHANNEL(6),
-	AD7606_CHANNEL(7),
-	AD7606_CHANNEL(8),
-	AD7606_CHANNEL(9),
-	AD7606_CHANNEL(10),
-	AD7606_CHANNEL(11),
-	AD7606_CHANNEL(12),
-	AD7606_CHANNEL(13),
-	AD7606_CHANNEL(14),
-	AD7606_CHANNEL(15),
-};
-
-static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
-	/* More devices added in future */
-	[ID_AD7605_4] = {
-		.channels = ad7605_channels,
-		.num_channels = 5,
-	},
-	[ID_AD7606_8] = {
-		.channels = ad7606_channels,
-		.num_channels = 9,
-		.oversampling_avail = ad7606_oversampling_avail,
-		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
-	},
-	[ID_AD7606_6] = {
-		.channels = ad7606_channels,
-		.num_channels = 7,
-		.oversampling_avail = ad7606_oversampling_avail,
-		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
-	},
-	[ID_AD7606_4] = {
-		.channels = ad7606_channels,
-		.num_channels = 5,
-		.oversampling_avail = ad7606_oversampling_avail,
-		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
-	},
-	[ID_AD7606B] = {
-		.channels = ad7606_channels,
-		.num_channels = 9,
-		.oversampling_avail = ad7606_oversampling_avail,
-		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
-	},
-	[ID_AD7616] = {
-		.channels = ad7616_channels,
-		.num_channels = 17,
-		.oversampling_avail = ad7616_oversampling_avail,
-		.oversampling_num = ARRAY_SIZE(ad7616_oversampling_avail),
-		.os_req_reset = true,
-		.init_delay_ms = 15,
-	},
-};
-
 static int ad7606_request_gpios(struct ad7606_state *st)
 {
 	struct device *dev = st->dev;
@@ -644,7 +546,7 @@  static void ad7606_pwm_disable(void *data)
 }
 
 int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
-		 const char *name, unsigned int id,
+		 const struct ad7606_chip_info *chip_info,
 		 const struct ad7606_bus_ops *bops)
 {
 	struct ad7606_state *st;
@@ -673,7 +575,7 @@  int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 		return dev_err_probe(dev, ret,
 				     "Failed to enable specified AVcc supply\n");
 
-	st->chip_info = &ad7606_chip_info_tbl[id];
+	st->chip_info = chip_info;
 
 	if (st->chip_info->oversampling_num) {
 		st->oversampling_avail = st->chip_info->oversampling_avail;
@@ -696,7 +598,7 @@  int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 			indio_dev->info = &ad7606_info_no_os_or_range;
 	}
 	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->name = name;
+	indio_dev->name = chip_info->name;
 	indio_dev->channels = st->chip_info->channels;
 	indio_dev->num_channels = st->chip_info->num_channels;
 
@@ -773,7 +675,7 @@  int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 					NULL,
 					&ad7606_interrupt,
 					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-					name, indio_dev);
+					chip_info->name, indio_dev);
 	if (ret)
 		return ret;
 
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
index 60bac1894a91..aab8fefb84be 100644
--- a/drivers/iio/adc/ad7606.h
+++ b/drivers/iio/adc/ad7606.h
@@ -40,8 +40,19 @@ 
 
 struct pwm_device		*cnvst_pwm;
 
+enum ad7606_supported_device_ids {
+	ID_AD7605_4,
+	ID_AD7606_8,
+	ID_AD7606_6,
+	ID_AD7606_4,
+	ID_AD7606B,
+	ID_AD7616,
+};
+
 /**
  * struct ad7606_chip_info - chip specific information
+ * @name		device name
+ * @id			device id
  * @channels:		channel specification
  * @num_channels:	number of channels
  * @oversampling_avail	pointer to the array which stores the available
@@ -52,6 +63,8 @@  struct pwm_device		*cnvst_pwm;
  *			after a restart
  */
 struct ad7606_chip_info {
+	enum ad7606_supported_device_ids id;
+	const char			*name;
 	const struct iio_chan_spec	*channels;
 	unsigned int			num_channels;
 	const unsigned int		*oversampling_avail;
@@ -151,16 +164,119 @@  struct ad7606_bus_ops {
 };
 
 int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
-		 const char *name, unsigned int id,
+		 const struct ad7606_chip_info *info,
 		 const struct ad7606_bus_ops *bops);
 
-enum ad7606_supported_device_ids {
-	ID_AD7605_4,
-	ID_AD7606_8,
-	ID_AD7606_6,
-	ID_AD7606_4,
-	ID_AD7606B,
-	ID_AD7616,
+static const unsigned int ad7606_oversampling_avail[7] = {
+	1, 2, 4, 8, 16, 32, 64,
+};
+
+static const unsigned int ad7616_oversampling_avail[8] = {
+	1, 2, 4, 8, 16, 32, 64, 128,
+};
+
+static const struct iio_chan_spec ad7605_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+	AD7605_CHANNEL(0),
+	AD7605_CHANNEL(1),
+	AD7605_CHANNEL(2),
+	AD7605_CHANNEL(3),
+};
+
+static const struct iio_chan_spec ad7606_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(8),
+	AD7606_CHANNEL(0),
+	AD7606_CHANNEL(1),
+	AD7606_CHANNEL(2),
+	AD7606_CHANNEL(3),
+	AD7606_CHANNEL(4),
+	AD7606_CHANNEL(5),
+	AD7606_CHANNEL(6),
+	AD7606_CHANNEL(7),
+};
+
+/*
+ * The current assumption that this driver makes for AD7616, is that it's
+ * working in Hardware Mode with Serial, Burst and Sequencer modes activated.
+ * To activate them, following pins must be pulled high:
+ *	-SER/PAR
+ *	-SEQEN
+ * And following pins must be pulled low:
+ *	-WR/BURST
+ *	-DB4/SER1W
+ */
+static const struct iio_chan_spec ad7616_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(16),
+	AD7606_CHANNEL(0),
+	AD7606_CHANNEL(1),
+	AD7606_CHANNEL(2),
+	AD7606_CHANNEL(3),
+	AD7606_CHANNEL(4),
+	AD7606_CHANNEL(5),
+	AD7606_CHANNEL(6),
+	AD7606_CHANNEL(7),
+	AD7606_CHANNEL(8),
+	AD7606_CHANNEL(9),
+	AD7606_CHANNEL(10),
+	AD7606_CHANNEL(11),
+	AD7606_CHANNEL(12),
+	AD7606_CHANNEL(13),
+	AD7606_CHANNEL(14),
+	AD7606_CHANNEL(15),
+};
+
+static const struct ad7606_chip_info ad7605_4_info = {
+	.channels = ad7605_channels,
+	.num_channels = 5,
+	.name = "ad7605-4",
+	.id = ID_AD7605_4,
+};
+
+static const struct ad7606_chip_info ad7606_8_info = {
+	.channels = ad7606_channels,
+	.num_channels = 9,
+	.oversampling_avail = ad7606_oversampling_avail,
+	.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
+	.name = "ad7606-8",
+	.id = ID_AD7606_8,
+};
+
+static const struct ad7606_chip_info ad7606_6_info = {
+	.channels = ad7606_channels,
+	.num_channels = 7,
+	.oversampling_avail = ad7606_oversampling_avail,
+	.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
+	.name = "ad7606-6",
+	.id = ID_AD7606_6,
+};
+
+static const struct ad7606_chip_info ad7606_4_info = {
+	.channels = ad7606_channels,
+	.num_channels = 5,
+	.oversampling_avail = ad7606_oversampling_avail,
+	.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
+	.name = "ad7606-4",
+	.id = ID_AD7606_4,
+};
+
+static const struct ad7606_chip_info ad7606b_info = {
+	.channels = ad7606_channels,
+	.num_channels = 9,
+	.oversampling_avail = ad7606_oversampling_avail,
+	.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
+	.name = "ad7606B",
+	.id = ID_AD7606B,
+};
+
+static const struct ad7606_chip_info ad7616_info = {
+	.channels = ad7616_channels,
+	.num_channels = 17,
+	.oversampling_avail = ad7616_oversampling_avail,
+	.oversampling_num = ARRAY_SIZE(ad7616_oversampling_avail),
+	.os_req_reset = true,
+	.init_delay_ms = 15,
+	.name = "ad7616",
+	.id = ID_AD7616,
 };
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/drivers/iio/adc/ad7606_par.c b/drivers/iio/adc/ad7606_par.c
index d8408052262e..d83c0edc1e31 100644
--- a/drivers/iio/adc/ad7606_par.c
+++ b/drivers/iio/adc/ad7606_par.c
@@ -47,7 +47,7 @@  static const struct ad7606_bus_ops ad7606_par8_bops = {
 
 static int ad7606_par_probe(struct platform_device *pdev)
 {
-	const struct platform_device_id *id = platform_get_device_id(pdev);
+	const struct ad7606_chip_info *chip_info = platform_get_device_match_data(pdev);
 	struct resource *res;
 	void __iomem *addr;
 	resource_size_t remap_size;
@@ -64,26 +64,26 @@  static int ad7606_par_probe(struct platform_device *pdev)
 	remap_size = resource_size(res);
 
 	return ad7606_probe(&pdev->dev, irq, addr,
-			    id->name, id->driver_data,
+			    chip_info,
 			    remap_size > 1 ? &ad7606_par16_bops :
 			    &ad7606_par8_bops);
 }
 
 static const struct platform_device_id ad7606_driver_ids[] = {
-	{ .name	= "ad7605-4", .driver_data = ID_AD7605_4, },
-	{ .name	= "ad7606-4", .driver_data = ID_AD7606_4, },
-	{ .name	= "ad7606-6", .driver_data = ID_AD7606_6, },
-	{ .name	= "ad7606-8", .driver_data = ID_AD7606_8, },
+	{ .name	= "ad7605-4", .driver_data = (kernel_ulong_t)&ad7605_4_info, },
+	{ .name	= "ad7606-4", .driver_data = (kernel_ulong_t)&ad7606_4_info, },
+	{ .name	= "ad7606-6", .driver_data = (kernel_ulong_t)&ad7606_6_info, },
+	{ .name	= "ad7606-8", .driver_data = (kernel_ulong_t)&ad7606_8_info, },
 	{ }
 };
 MODULE_DEVICE_TABLE(platform, ad7606_driver_ids);
 
 static const struct of_device_id ad7606_of_match[] = {
-	{ .compatible = "adi,ad7605-4" },
-	{ .compatible = "adi,ad7606-4" },
-	{ .compatible = "adi,ad7606-6" },
-	{ .compatible = "adi,ad7606-8" },
-	{ },
+	{ .compatible = "adi,ad7605-4", .data = &ad7605_4_info },
+	{ .compatible = "adi,ad7606-4", .data = &ad7606_4_info },
+	{ .compatible = "adi,ad7606-6", .data = &ad7606_6_info },
+	{ .compatible = "adi,ad7606-8", .data = &ad7606_8_info },
+	{ }
 };
 MODULE_DEVICE_TABLE(of, ad7606_of_match);
 
diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c
index 287a0591533b..c23a7448f851 100644
--- a/drivers/iio/adc/ad7606_spi.c
+++ b/drivers/iio/adc/ad7606_spi.c
@@ -307,10 +307,10 @@  static const struct ad7606_bus_ops ad7606B_spi_bops = {
 
 static int ad7606_spi_probe(struct spi_device *spi)
 {
-	const struct spi_device_id *id = spi_get_device_id(spi);
+	const struct ad7606_chip_info *chip_info = spi_get_device_match_data(spi);
 	const struct ad7606_bus_ops *bops;
 
-	switch (id->driver_data) {
+	switch (chip_info->id) {
 	case ID_AD7616:
 		bops = &ad7616_spi_bops;
 		break;
@@ -323,28 +323,27 @@  static int ad7606_spi_probe(struct spi_device *spi)
 	}
 
 	return ad7606_probe(&spi->dev, spi->irq, NULL,
-			    id->name, id->driver_data,
-			    bops);
+			    chip_info, bops);
 }
 
 static const struct spi_device_id ad7606_id_table[] = {
-	{ "ad7605-4", ID_AD7605_4 },
-	{ "ad7606-4", ID_AD7606_4 },
-	{ "ad7606-6", ID_AD7606_6 },
-	{ "ad7606-8", ID_AD7606_8 },
-	{ "ad7606b",  ID_AD7606B },
-	{ "ad7616",   ID_AD7616 },
+	{ "ad7605-4", (kernel_ulong_t)&ad7605_4_info },
+	{ "ad7606-4", (kernel_ulong_t)&ad7606_4_info },
+	{ "ad7606-6", (kernel_ulong_t)&ad7606_6_info },
+	{ "ad7606-8", (kernel_ulong_t)&ad7606_8_info },
+	{ "ad7606b",  (kernel_ulong_t)&ad7606b_info },
+	{ "ad7616",   (kernel_ulong_t)&ad7616_info },
 	{}
 };
 MODULE_DEVICE_TABLE(spi, ad7606_id_table);
 
 static const struct of_device_id ad7606_of_match[] = {
-	{ .compatible = "adi,ad7605-4" },
-	{ .compatible = "adi,ad7606-4" },
-	{ .compatible = "adi,ad7606-6" },
-	{ .compatible = "adi,ad7606-8" },
-	{ .compatible = "adi,ad7606b" },
-	{ .compatible = "adi,ad7616" },
+	{ .compatible = "adi,ad7605-4", &ad7605_4_info },
+	{ .compatible = "adi,ad7606-4", &ad7606_4_info },
+	{ .compatible = "adi,ad7606-6", &ad7606_6_info },
+	{ .compatible = "adi,ad7606-8", &ad7606_8_info },
+	{ .compatible = "adi,ad7606b", &ad7606b_info },
+	{ .compatible = "adi,ad7616", &ad7616_info },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, ad7606_of_match);