diff mbox series

[v9,2/4] mmc: block: register RPMB partition with the RPMB subsystem

Message ID 20240814153558.708365-3-jens.wiklander@linaro.org
State New
Headers show
Series Replay Protected Memory Block (RPMB) subsystem | expand

Commit Message

Jens Wiklander Aug. 14, 2024, 3:35 p.m. UTC
Register eMMC RPMB partition with the RPMB subsystem and provide
an implementation for the RPMB access operations abstracting
the actual multi step process.

Add a callback to extract the needed device information at registration
to avoid accessing the struct mmc_card at a later stage as we're not
holding a reference counter for this struct.

Taking the needed reference to md->disk in mmc_blk_alloc_rpmb_part()
instead of in mmc_rpmb_chrdev_open(). This is needed by the
route_frames() function pointer in struct rpmb_ops.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Tested-by: Manuel Traut <manut@mecka.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/mmc/core/block.c | 242 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 240 insertions(+), 2 deletions(-)

Comments

Ulf Hansson Aug. 21, 2024, 2:10 p.m. UTC | #1
On Tue, 20 Aug 2024 at 16:47, Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> On Wed, 14 Aug 2024 at 17:36, Jens Wiklander <jens.wiklander@linaro.org> wrote:
> >
> > Register eMMC RPMB partition with the RPMB subsystem and provide
> > an implementation for the RPMB access operations abstracting
> > the actual multi step process.
> >
> > Add a callback to extract the needed device information at registration
> > to avoid accessing the struct mmc_card at a later stage as we're not
> > holding a reference counter for this struct.
> >
> > Taking the needed reference to md->disk in mmc_blk_alloc_rpmb_part()
> > instead of in mmc_rpmb_chrdev_open(). This is needed by the
> > route_frames() function pointer in struct rpmb_ops.
> >
> > Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
> > Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
> > Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
> > Tested-by: Manuel Traut <manut@mecka.net>
> > Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>
> First of all, sorry for the long delay! Besides only one comment, see
> more below, this looks good to me.
>
> > ---
> >  drivers/mmc/core/block.c | 242 ++++++++++++++++++++++++++++++++++++++-
> >  1 file changed, 240 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> > index 2c9963248fcb..cc7318089cf2 100644
> > --- a/drivers/mmc/core/block.c
> > +++ b/drivers/mmc/core/block.c
> > @@ -33,6 +33,7 @@
> >  #include <linux/cdev.h>
> >  #include <linux/mutex.h>
> >  #include <linux/scatterlist.h>
> > +#include <linux/string.h>
> >  #include <linux/string_helpers.h>
> >  #include <linux/delay.h>
> >  #include <linux/capability.h>
> > @@ -40,6 +41,7 @@
> >  #include <linux/pm_runtime.h>
> >  #include <linux/idr.h>
> >  #include <linux/debugfs.h>
> > +#include <linux/rpmb.h>
> >
> >  #include <linux/mmc/ioctl.h>
> >  #include <linux/mmc/card.h>
> > @@ -76,6 +78,48 @@ MODULE_ALIAS("mmc:block");
> >  #define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16)
> >  #define MMC_EXTRACT_VALUE_FROM_ARG(x) ((x & 0x0000FF00) >> 8)
> >
> > +/**
> > + * struct rpmb_frame - rpmb frame as defined by eMMC 5.1 (JESD84-B51)
> > + *
> > + * @stuff        : stuff bytes
> > + * @key_mac      : The authentication key or the message authentication
> > + *                 code (MAC) depending on the request/response type.
> > + *                 The MAC will be delivered in the last (or the only)
> > + *                 block of data.
> > + * @data         : Data to be written or read by signed access.
> > + * @nonce        : Random number generated by the host for the requests
> > + *                 and copied to the response by the RPMB engine.
> > + * @write_counter: Counter value for the total amount of the successful
> > + *                 authenticated data write requests made by the host.
> > + * @addr         : Address of the data to be programmed to or read
> > + *                 from the RPMB. Address is the serial number of
> > + *                 the accessed block (half sector 256B).
> > + * @block_count  : Number of blocks (half sectors, 256B) requested to be
> > + *                 read/programmed.
> > + * @result       : Includes information about the status of the write counter
> > + *                 (valid, expired) and result of the access made to the RPMB.
> > + * @req_resp     : Defines the type of request and response to/from the memory.
> > + *
> > + * The stuff bytes and big-endian properties are modeled to fit to the spec.
> > + */
> > +struct rpmb_frame {
> > +       u8     stuff[196];
> > +       u8     key_mac[32];
> > +       u8     data[256];
> > +       u8     nonce[16];
> > +       __be32 write_counter;
> > +       __be16 addr;
> > +       __be16 block_count;
> > +       __be16 result;
> > +       __be16 req_resp;
> > +} __packed;
> > +
> > +#define RPMB_PROGRAM_KEY       0x1    /* Program RPMB Authentication Key */
> > +#define RPMB_GET_WRITE_COUNTER 0x2    /* Read RPMB write counter */
> > +#define RPMB_WRITE_DATA        0x3    /* Write data to RPMB partition */
> > +#define RPMB_READ_DATA         0x4    /* Read data from RPMB partition */
> > +#define RPMB_RESULT_READ       0x5    /* Read result request  (Internal) */
> > +
> >  static DEFINE_MUTEX(block_mutex);
> >
> >  /*
> > @@ -155,6 +199,7 @@ static const struct bus_type mmc_rpmb_bus_type = {
> >   * @id: unique device ID number
> >   * @part_index: partition index (0 on first)
> >   * @md: parent MMC block device
> > + * @rdev: registered RPMB device
> >   * @node: list item, so we can put this device on a list
> >   */
> >  struct mmc_rpmb_data {
> > @@ -163,6 +208,7 @@ struct mmc_rpmb_data {
> >         int id;
> >         unsigned int part_index;
> >         struct mmc_blk_data *md;
> > +       struct rpmb_dev *rdev;
> >         struct list_head node;
> >  };
> >
> > @@ -2670,7 +2716,6 @@ static int mmc_rpmb_chrdev_open(struct inode *inode, struct file *filp)
> >
> >         get_device(&rpmb->dev);
> >         filp->private_data = rpmb;
> > -       mmc_blk_get(rpmb->md->disk);
>
> If I understand correctly, the call to mmc_blk_get() is here to
> reference count the usage of the md->disk. So when a user decides to
> open the chrdev, we are keeping a reference to the corresponding data
> around, until the corresponding file descriptor is closed and
> mmc_rpmb_chrdev_release() is called. We do the similar thing if the
> regular mmc block device is opened.
>
> If we change to increase/decrease the reference count from
> mmc_blk_alloc_rpmb_part()/mmc_blk_rpmb_device_release() instead - are
> you certain that we are still taking care of the above scenario
> correctly?
>
> I guess a test that opens the chrdev and then unbinding the mmc host
> driver should tell us. :-)
diff mbox series

Patch

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 2c9963248fcb..cc7318089cf2 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -33,6 +33,7 @@ 
 #include <linux/cdev.h>
 #include <linux/mutex.h>
 #include <linux/scatterlist.h>
+#include <linux/string.h>
 #include <linux/string_helpers.h>
 #include <linux/delay.h>
 #include <linux/capability.h>
@@ -40,6 +41,7 @@ 
 #include <linux/pm_runtime.h>
 #include <linux/idr.h>
 #include <linux/debugfs.h>
+#include <linux/rpmb.h>
 
 #include <linux/mmc/ioctl.h>
 #include <linux/mmc/card.h>
@@ -76,6 +78,48 @@  MODULE_ALIAS("mmc:block");
 #define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16)
 #define MMC_EXTRACT_VALUE_FROM_ARG(x) ((x & 0x0000FF00) >> 8)
 
+/**
+ * struct rpmb_frame - rpmb frame as defined by eMMC 5.1 (JESD84-B51)
+ *
+ * @stuff        : stuff bytes
+ * @key_mac      : The authentication key or the message authentication
+ *                 code (MAC) depending on the request/response type.
+ *                 The MAC will be delivered in the last (or the only)
+ *                 block of data.
+ * @data         : Data to be written or read by signed access.
+ * @nonce        : Random number generated by the host for the requests
+ *                 and copied to the response by the RPMB engine.
+ * @write_counter: Counter value for the total amount of the successful
+ *                 authenticated data write requests made by the host.
+ * @addr         : Address of the data to be programmed to or read
+ *                 from the RPMB. Address is the serial number of
+ *                 the accessed block (half sector 256B).
+ * @block_count  : Number of blocks (half sectors, 256B) requested to be
+ *                 read/programmed.
+ * @result       : Includes information about the status of the write counter
+ *                 (valid, expired) and result of the access made to the RPMB.
+ * @req_resp     : Defines the type of request and response to/from the memory.
+ *
+ * The stuff bytes and big-endian properties are modeled to fit to the spec.
+ */
+struct rpmb_frame {
+	u8     stuff[196];
+	u8     key_mac[32];
+	u8     data[256];
+	u8     nonce[16];
+	__be32 write_counter;
+	__be16 addr;
+	__be16 block_count;
+	__be16 result;
+	__be16 req_resp;
+} __packed;
+
+#define RPMB_PROGRAM_KEY       0x1    /* Program RPMB Authentication Key */
+#define RPMB_GET_WRITE_COUNTER 0x2    /* Read RPMB write counter */
+#define RPMB_WRITE_DATA        0x3    /* Write data to RPMB partition */
+#define RPMB_READ_DATA         0x4    /* Read data from RPMB partition */
+#define RPMB_RESULT_READ       0x5    /* Read result request  (Internal) */
+
 static DEFINE_MUTEX(block_mutex);
 
 /*
@@ -155,6 +199,7 @@  static const struct bus_type mmc_rpmb_bus_type = {
  * @id: unique device ID number
  * @part_index: partition index (0 on first)
  * @md: parent MMC block device
+ * @rdev: registered RPMB device
  * @node: list item, so we can put this device on a list
  */
 struct mmc_rpmb_data {
@@ -163,6 +208,7 @@  struct mmc_rpmb_data {
 	int id;
 	unsigned int part_index;
 	struct mmc_blk_data *md;
+	struct rpmb_dev *rdev;
 	struct list_head node;
 };
 
@@ -2670,7 +2716,6 @@  static int mmc_rpmb_chrdev_open(struct inode *inode, struct file *filp)
 
 	get_device(&rpmb->dev);
 	filp->private_data = rpmb;
-	mmc_blk_get(rpmb->md->disk);
 
 	return nonseekable_open(inode, filp);
 }
@@ -2680,7 +2725,6 @@  static int mmc_rpmb_chrdev_release(struct inode *inode, struct file *filp)
 	struct mmc_rpmb_data *rpmb = container_of(inode->i_cdev,
 						  struct mmc_rpmb_data, chrdev);
 
-	mmc_blk_put(rpmb->md);
 	put_device(&rpmb->dev);
 
 	return 0;
@@ -2701,10 +2745,165 @@  static void mmc_blk_rpmb_device_release(struct device *dev)
 {
 	struct mmc_rpmb_data *rpmb = dev_get_drvdata(dev);
 
+	rpmb_dev_unregister(rpmb->rdev);
+	mmc_blk_put(rpmb->md);
 	ida_free(&mmc_rpmb_ida, rpmb->id);
 	kfree(rpmb);
 }
 
+static void free_idata(struct mmc_blk_ioc_data **idata, unsigned int cmd_count)
+{
+	unsigned int n;
+
+	for (n = 0; n < cmd_count; n++)
+		kfree(idata[n]);
+	kfree(idata);
+}
+
+static struct mmc_blk_ioc_data **alloc_idata(struct mmc_rpmb_data *rpmb,
+					     unsigned int cmd_count)
+{
+	struct mmc_blk_ioc_data **idata;
+	unsigned int n;
+
+	idata = kcalloc(cmd_count, sizeof(*idata), GFP_KERNEL);
+	if (!idata)
+		return NULL;
+
+	for (n = 0; n < cmd_count; n++) {
+		idata[n] = kcalloc(1, sizeof(**idata), GFP_KERNEL);
+		if (!idata[n]) {
+			free_idata(idata, n);
+			return NULL;
+		}
+		idata[n]->rpmb = rpmb;
+	}
+
+	return idata;
+}
+
+static void set_idata(struct mmc_blk_ioc_data *idata, u32 opcode,
+		      int write_flag, u8 *buf, unsigned int buf_bytes)
+{
+	/*
+	 * The size of an RPMB frame must match what's expected by the
+	 * hardware.
+	 */
+	BUILD_BUG_ON(sizeof(struct rpmb_frame) != 512);
+
+	idata->ic.opcode = opcode;
+	idata->ic.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+	idata->ic.write_flag = write_flag;
+	idata->ic.blksz = sizeof(struct rpmb_frame);
+	idata->ic.blocks = buf_bytes /  idata->ic.blksz;
+	idata->buf = buf;
+	idata->buf_bytes = buf_bytes;
+}
+
+static int mmc_route_rpmb_frames(struct device *dev, u8 *req,
+				 unsigned int req_len, u8 *resp,
+				 unsigned int resp_len)
+{
+	struct rpmb_frame *frm = (struct rpmb_frame *)req;
+	struct mmc_rpmb_data *rpmb = dev_get_drvdata(dev);
+	struct mmc_blk_data *md = rpmb->md;
+	struct mmc_blk_ioc_data **idata;
+	struct mmc_queue_req *mq_rq;
+	unsigned int cmd_count;
+	struct request *rq;
+	u16 req_type;
+	bool write;
+	int ret;
+
+	if (IS_ERR(md->queue.card))
+		return PTR_ERR(md->queue.card);
+
+	if (req_len < sizeof(*frm))
+		return -EINVAL;
+
+	req_type = be16_to_cpu(frm->req_resp);
+	switch (req_type) {
+	case RPMB_PROGRAM_KEY:
+		if (req_len != sizeof(struct rpmb_frame) ||
+		    resp_len != sizeof(struct rpmb_frame))
+			return -EINVAL;
+		write = true;
+		break;
+	case RPMB_GET_WRITE_COUNTER:
+		if (req_len != sizeof(struct rpmb_frame) ||
+		    resp_len != sizeof(struct rpmb_frame))
+			return -EINVAL;
+		write = false;
+		break;
+	case RPMB_WRITE_DATA:
+		if (req_len % sizeof(struct rpmb_frame) ||
+		    resp_len != sizeof(struct rpmb_frame))
+			return -EINVAL;
+		write = true;
+		break;
+	case RPMB_READ_DATA:
+		if (req_len != sizeof(struct rpmb_frame) ||
+		    resp_len % sizeof(struct rpmb_frame))
+			return -EINVAL;
+		write = false;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (write)
+		cmd_count = 3;
+	else
+		cmd_count = 2;
+
+	idata = alloc_idata(rpmb, cmd_count);
+	if (!idata)
+		return -ENOMEM;
+
+	if (write) {
+		struct rpmb_frame *frm = (struct rpmb_frame *)resp;
+
+		/* Send write request frame(s) */
+		set_idata(idata[0], MMC_WRITE_MULTIPLE_BLOCK,
+			  1 | MMC_CMD23_ARG_REL_WR, req, req_len);
+
+		/* Send result request frame */
+		memset(frm, 0, sizeof(*frm));
+		frm->req_resp = cpu_to_be16(RPMB_RESULT_READ);
+		set_idata(idata[1], MMC_WRITE_MULTIPLE_BLOCK, 1, resp,
+			  resp_len);
+
+		/* Read response frame */
+		set_idata(idata[2], MMC_READ_MULTIPLE_BLOCK, 0, resp, resp_len);
+	} else {
+		/* Send write request frame(s) */
+		set_idata(idata[0], MMC_WRITE_MULTIPLE_BLOCK, 1, req, req_len);
+
+		/* Read response frame */
+		set_idata(idata[1], MMC_READ_MULTIPLE_BLOCK, 0, resp, resp_len);
+	}
+
+	rq = blk_mq_alloc_request(md->queue.queue, REQ_OP_DRV_OUT, 0);
+	if (IS_ERR(rq)) {
+		ret = PTR_ERR(rq);
+		goto out;
+	}
+
+	mq_rq = req_to_mmc_queue_req(rq);
+	mq_rq->drv_op = MMC_DRV_OP_IOCTL_RPMB;
+	mq_rq->drv_op_result = -EIO;
+	mq_rq->drv_op_data = idata;
+	mq_rq->ioc_count = cmd_count;
+	blk_execute_rq(rq, false);
+	ret = req_to_mmc_queue_req(rq)->drv_op_result;
+
+	blk_mq_free_request(rq);
+
+out:
+	free_idata(idata, cmd_count);
+	return ret;
+}
+
 static int mmc_blk_alloc_rpmb_part(struct mmc_card *card,
 				   struct mmc_blk_data *md,
 				   unsigned int part_index,
@@ -2739,6 +2938,7 @@  static int mmc_blk_alloc_rpmb_part(struct mmc_card *card,
 	rpmb->dev.release = mmc_blk_rpmb_device_release;
 	device_initialize(&rpmb->dev);
 	dev_set_drvdata(&rpmb->dev, rpmb);
+	mmc_blk_get(md->disk);
 	rpmb->md = md;
 
 	cdev_init(&rpmb->chrdev, &mmc_rpmb_fileops);
@@ -3000,6 +3200,42 @@  static void mmc_blk_remove_debugfs(struct mmc_card *card,
 
 #endif /* CONFIG_DEBUG_FS */
 
+static void mmc_blk_rpmb_add(struct mmc_card *card)
+{
+	struct mmc_blk_data *md = dev_get_drvdata(&card->dev);
+	struct mmc_rpmb_data *rpmb;
+	struct rpmb_dev *rdev;
+	unsigned int n;
+	u32 cid[4];
+	struct rpmb_descr descr = {
+		.type = RPMB_TYPE_EMMC,
+		.route_frames = mmc_route_rpmb_frames,
+		.reliable_wr_count = card->ext_csd.enhanced_rpmb_supported ?
+				     2 : 32,
+		.capacity = card->ext_csd.raw_rpmb_size_mult,
+		.dev_id = (void *)cid,
+		.dev_id_len = sizeof(cid),
+	};
+
+	/*
+	 * Provice CID as an octet array. The CID needs to be interpreted
+	 * when used as input to derive the RPMB key since some fields
+	 * will change due to firmware updates.
+	 */
+	for (n = 0; n < 4; n++)
+		cid[n] = be32_to_cpu((__force __be32)card->raw_cid[n]);
+
+	list_for_each_entry(rpmb, &md->rpmbs, node) {
+		rdev = rpmb_dev_register(&rpmb->dev, &descr);
+		if (IS_ERR(rdev)) {
+			pr_warn("%s: could not register RPMB device\n",
+				dev_name(&rpmb->dev));
+			continue;
+		}
+		rpmb->rdev = rdev;
+	}
+}
+
 static int mmc_blk_probe(struct mmc_card *card)
 {
 	struct mmc_blk_data *md;
@@ -3045,6 +3281,8 @@  static int mmc_blk_probe(struct mmc_card *card)
 		pm_runtime_enable(&card->dev);
 	}
 
+	mmc_blk_rpmb_add(card);
+
 	return 0;
 
 out: