diff mbox series

[v4,3/6] i2c: Introduce OF component probe function

Message ID 20240808095931.2649657-4-wenst@chromium.org
State New
Headers show
Series platform/chrome: Introduce DT hardware prober | expand

Commit Message

Chen-Yu Tsai Aug. 8, 2024, 9:59 a.m. UTC
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular device
can be detected by some firmware provided identifier, other times that
information is not available, and the kernel has to try to probe each
device.

This change attempts to make the "probe each device" case cleaner. The
current approach is to have all options added and enabled in the device
tree. The kernel would then bind each device and run each driver's probe
function. This works, but has been broken before due to the introduction
of asynchronous probing, causing multiple instances requesting "shared"
resources, such as pinmuxes, GPIO pins, interrupt lines, at the same
time, with only one instance succeeding. Work arounds for these include
moving the pinmux to the parent I2C controller, using GPIO hogs or
pinmux settings to keep the GPIO pins in some fixed configuration, and
requesting the interrupt line very late. Such configurations can be seen
on the MT8183 Krane Chromebook tablets, and the Qualcomm sc8280xp-based
Lenovo Thinkpad 13S.

Instead of this delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe. function For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them responds.
It will then enable the device that responds.

This requires some minor modifications in the existing device tree. The
status for all the device nodes for the component options must be set
to "failed-needs-probe". This makes it clear that some mechanism is
needed to enable one of them, and also prevents the prober and device
drivers running at the same time.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Changes since v3:
- Complete kernel-doc
- Return different error if I2C controller is disabled
- Expand comment to explain assumptions and constraints
- Split for-loop finding target node and operations on target node
- Add missing i2c_put_adapter()
- Move prober code to separate file

Rob also asked why there was a limitation of "exactly one touchscreen
will be enabled across the whole tree".

The use case this prober currently targets is a component on consumer
electronics (tablet or laptop) being swapped out due to cost or supply
reasons. Designs with multiple components of the same type are pretty
rare. The way the next patch is written also assumes this for efficiency
reasons.

Changes since v2:
- New patch split out from "of: Introduce hardware prober driver"
- Addressed Rob's comments
  - Move i2c prober to i2c subsystem
  - Use of_node_is_available() to check if node is enabled.
  - Use OF changeset API to update status property
- Addressed Andy's comments
  - Probe function now accepts "struct device *dev" instead to reduce
    line length and dereferences
  - Move "ret = 0" to just before for_each_child_of_node(i2c_node, node)
---
 drivers/i2c/Makefile             |   1 +
 drivers/i2c/i2c-core-of-prober.c | 155 +++++++++++++++++++++++++++++++
 include/linux/i2c.h              |   4 +
 3 files changed, 160 insertions(+)
 create mode 100644 drivers/i2c/i2c-core-of-prober.c

Comments

Chen-Yu Tsai Aug. 15, 2024, 9:55 a.m. UTC | #1
On Tue, Aug 13, 2024 at 7:26 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> On Thu, Aug 08, 2024 at 05:59:26PM +0800, Chen-Yu Tsai wrote:
> > Some devices are designed and manufactured with some components having
> > multiple drop-in replacement options. These components are often
> > connected to the mainboard via ribbon cables, having the same signals
> > and pin assignments across all options. These may include the display
> > panel and touchscreen on laptops and tablets, and the trackpad on
> > laptops. Sometimes which component option is used in a particular device
> > can be detected by some firmware provided identifier, other times that
> > information is not available, and the kernel has to try to probe each
> > device.
> >
> > This change attempts to make the "probe each device" case cleaner. The
> > current approach is to have all options added and enabled in the device
> > tree. The kernel would then bind each device and run each driver's probe
> > function. This works, but has been broken before due to the introduction
> > of asynchronous probing, causing multiple instances requesting "shared"
> > resources, such as pinmuxes, GPIO pins, interrupt lines, at the same
> > time, with only one instance succeeding. Work arounds for these include
> > moving the pinmux to the parent I2C controller, using GPIO hogs or
> > pinmux settings to keep the GPIO pins in some fixed configuration, and
> > requesting the interrupt line very late. Such configurations can be seen
> > on the MT8183 Krane Chromebook tablets, and the Qualcomm sc8280xp-based
> > Lenovo Thinkpad 13S.
> >
> > Instead of this delicate dance between drivers and device tree quirks,
> > this change introduces a simple I2C component probe. function For a
> > given class of devices on the same I2C bus, it will go through all of
> > them, doing a simple I2C read transfer and see which one of them responds.
> > It will then enable the device that responds.
> >
> > This requires some minor modifications in the existing device tree. The
> > status for all the device nodes for the component options must be set
> > to "failed-needs-probe". This makes it clear that some mechanism is
> > needed to enable one of them, and also prevents the prober and device
> > drivers running at the same time.
>
> ...
>
> > +int i2c_of_probe_component(struct device *dev, const char *type)
>
> Use respective scoped variants and remove the related of_node_put() calls.

Ack. Will also try splitting and reworking the code so they have
tighter scopes.

> ...
>
> > +             ocs = kzalloc(sizeof(*ocs), GFP_KERNEL);
>
> Use __free()

This ends up only a bit better than with gotos once this small section
is split out into a helper function.

AFAIK ocs, or at least the underlying properties, have to be left around
once the changeset is applied as they are now part of the dynamic live
tree. And that's fine since once applied, nothing is going to un-apply
it. OTOH in the error path it needs extra cleanup if any actions were
added.

So I end up with the following to silence the "must check return value"
warning on success, and cleanup on error:

ret = of_changeset_apply(ocs);
if (!ret) {
        void *ptr __always_unused = no_free_ptr(ocs);
} else {
        of_changeset_destroy(ocs);
}

In my case it might actually be safe to do of_changeset_destroy(ocs) and
free it regardless, but I'm not really confident.


ChenYu



> > +             if (!ocs) {
> > +                     ret = -ENOMEM;
> > +                     goto err_put_node;
> > +             }
>
> > +err_free_ocs:
> > +     kfree(ocs);
>
> --
> With Best Regards,
> Andy Shevchenko
>
>
diff mbox series

Patch

diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 3f71ce4711e3..0c543c742895 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -9,6 +9,7 @@  i2c-core-objs 			:= i2c-core-base.o i2c-core-smbus.o
 i2c-core-$(CONFIG_ACPI)		+= i2c-core-acpi.o
 i2c-core-$(CONFIG_I2C_SLAVE) 	+= i2c-core-slave.o
 i2c-core-$(CONFIG_OF) 		+= i2c-core-of.o
+i2c-core-$(CONFIG_OF_DYNAMIC) 	+= i2c-core-of-prober.o
 
 obj-$(CONFIG_I2C_SMBUS)		+= i2c-smbus.o
 obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
diff --git a/drivers/i2c/i2c-core-of-prober.c b/drivers/i2c/i2c-core-of-prober.c
new file mode 100644
index 000000000000..08aa736cc7a9
--- /dev/null
+++ b/drivers/i2c/i2c-core-of-prober.c
@@ -0,0 +1,155 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Linux I2C core OF component prober code
+ *
+ * Copyright (C) 2024 Google LLC
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+/*
+ * Some devices, such as Google Hana Chromebooks, are produced by multiple
+ * vendors each using their preferred components. Such components are all
+ * in the device tree. Instead of having all of them enabled and having each
+ * driver separately try and probe its device while fighting over shared
+ * resources, they can be marked as "fail-needs-probe" and have a prober
+ * figure out which one is actually used beforehand.
+ *
+ * This prober assumes such drop-in parts are on the same I2C bus, have
+ * non-conflicting addresses, and can be directly probed by seeing which
+ * address responds.
+ *
+ * TODO:
+ * - Support handling common regulators and GPIOs.
+ * - Support I2C muxes
+ */
+
+/**
+ * i2c_of_probe_component() - probe for devices of "type" on the same i2c bus
+ * @dev: &struct device of the caller, only used for dev_* printk messages
+ * @type: a string to match the device node name prefix to probe for
+ *
+ * Probe for possible I2C components of the same "type" on the same I2C bus
+ * that have their status marked as "fail".
+ *
+ * Assumes that across the entire device tree the only instances of nodes
+ * prefixed with "type" are the ones that need handling for second source
+ * components. In other words, if type is "touchscreen", then all device
+ * nodes named "touchscreen*" are the ones that need probing. There cannot
+ * be another "touchscreen" node that is already enabled.
+ *
+ * Assumes that for each "type" of component, only one actually exists. In
+ * other words, only one matching and existing device will be enabled.
+ *
+ * Context: Process context only. Does non-atomic I2C transfers.
+ *          Should only be used from a driver probe function, as the function
+ *          can return -EPROBE_DEFER if the I2C adapter is unavailable.
+ * Return: 0 on success or no-op, error code otherwise.
+ *         A no-op can happen when it seems like the device tree already
+ *         has components of the type to be probed already enabled. This
+ *         can happen when the device tree had not been updated to mark
+ *         the status of the to-be-probed components as "fail". Or this
+ *         function was already run with the same parameters and succeeded
+ *         in enabling a component. The latter could happen if the user
+ *         had multiple types of components to probe, and one of them down
+ *         the list caused a deferred probe. This is expected behavior.
+ */
+int i2c_of_probe_component(struct device *dev, const char *type)
+{
+	struct device_node *node, *i2c_node;
+	struct i2c_adapter *i2c;
+	struct of_changeset *ocs = NULL;
+	int ret;
+
+	node = of_find_node_by_name(NULL, type);
+	if (!node)
+		return dev_err_probe(dev, -ENODEV, "Could not find %s device node\n", type);
+
+	i2c_node = of_get_next_parent(node);
+	if (!of_node_name_eq(i2c_node, "i2c")) {
+		of_node_put(i2c_node);
+		return dev_err_probe(dev, -EINVAL, "%s device isn't on I2C bus\n", type);
+	}
+
+	if (!of_device_is_available(i2c_node)) {
+		of_node_put(i2c_node);
+		return dev_err_probe(dev, -ENODEV, "I2C controller not available\n");
+	}
+
+	for_each_child_of_node(i2c_node, node) {
+		if (!of_node_name_prefix(node, type))
+			continue;
+		if (of_device_is_available(node)) {
+			/*
+			 * Device tree has component already enabled. Either the
+			 * device tree isn't supported or we already probed once.
+			 */
+			of_node_put(node);
+			of_node_put(i2c_node);
+			return 0;
+		}
+	}
+
+	i2c = of_get_i2c_adapter_by_node(i2c_node);
+	if (!i2c) {
+		of_node_put(i2c_node);
+		return dev_err_probe(dev, -EPROBE_DEFER, "Couldn't get I2C adapter\n");
+	}
+
+	ret = 0;
+	for_each_child_of_node(i2c_node, node) {
+		union i2c_smbus_data data;
+		u32 addr;
+
+		if (!of_node_name_prefix(node, type))
+			continue;
+		if (of_property_read_u32(node, "reg", &addr))
+			continue;
+		if (i2c_smbus_xfer(i2c, addr, 0, I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &data) < 0)
+			continue;
+
+		break;
+	}
+
+	/* Found a device that is responding */
+	if (node) {
+		dev_info(dev, "Enabling %pOF\n", node);
+
+		ocs = kzalloc(sizeof(*ocs), GFP_KERNEL);
+		if (!ocs) {
+			ret = -ENOMEM;
+			goto err_put_node;
+		}
+
+		of_changeset_init(ocs);
+		ret = of_changeset_update_prop_string(ocs, node, "status", "okay");
+		if (ret)
+			goto err_free_ocs;
+		ret = of_changeset_apply(ocs);
+		if (ret)
+			goto err_destroy_ocs;
+
+		of_node_put(node);
+	}
+
+	i2c_put_adapter(i2c);
+	of_node_put(i2c_node);
+
+	return 0;
+
+err_destroy_ocs:
+	of_changeset_destroy(ocs);
+err_free_ocs:
+	kfree(ocs);
+err_put_node:
+	of_node_put(node);
+	i2c_put_adapter(i2c);
+	of_node_put(i2c_node);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_of_probe_component);
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 7eedd0c662da..0415d5d0f6ac 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -1030,6 +1030,10 @@  const struct of_device_id
 int of_i2c_get_board_info(struct device *dev, struct device_node *node,
 			  struct i2c_board_info *info);
 
+#if IS_ENABLED(CONFIG_OF_DYNAMIC)
+int i2c_of_probe_component(struct device *dev, const char *type);
+#endif
+
 #else
 
 static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)