diff mbox series

[v1,08/10] arm64: dts: exynos: Add initial support for exynos8895 SoC

Message ID 20240807082843.352937-9-ivo.ivanov.ivanov1@gmail.com
State Superseded
Headers show
Series Add minimal Exynos8895 SoC and SM-G950F support | expand

Commit Message

Ivaylo Ivanov Aug. 7, 2024, 8:28 a.m. UTC 
From: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>

Exynos 8895 SoC is an ARMv8 mobile SoC found in the Samsung Galaxy
S8 (dreamlte), S8 Plus (dream2lte), Note 8 (greatlte) and the Meizu
15 Plus (m1891). Add minimal support for that SoC, including:

- All 8 cores via PSCI
- ChipID
- Generic ARMV8 Timer
- Enumarate all pinctrl nodes

Further platform support will be added over time.

Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
---
 .../boot/dts/exynos/exynos8895-pinctrl.dtsi   | 1378 +++++++++++++++++
 arch/arm64/boot/dts/exynos/exynos8895.dtsi    |  253 +++
 2 files changed, 1631 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos8895.dtsi

Comments

Ivaylo Ivanov Aug. 7, 2024, 11:20 a.m. UTC | #1 
On 8/7/24 12:20, Krzysztof Kozlowski wrote:
> On 07/08/2024 10:28, ivo.ivanov.ivanov1@gmail.com wrote:
>> From: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
>>
>> Exynos 8895 SoC is an ARMv8 mobile SoC found in the Samsung Galaxy
>> S8 (dreamlte), S8 Plus (dream2lte), Note 8 (greatlte) and the Meizu
>> 15 Plus (m1891). Add minimal support for that SoC, including:
>>
>> - All 8 cores via PSCI
>> - ChipID
>> - Generic ARMV8 Timer
>> - Enumarate all pinctrl nodes
>>
>> Further platform support will be added over time.
>>
>> Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
>> ---
>>  .../boot/dts/exynos/exynos8895-pinctrl.dtsi   | 1378 +++++++++++++++++
>>  arch/arm64/boot/dts/exynos/exynos8895.dtsi    |  253 +++
>>  2 files changed, 1631 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
>>  create mode 100644 arch/arm64/boot/dts/exynos/exynos8895.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
>> new file mode 100644
>> index 000000000..1dcb61e2e
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
>> @@ -0,0 +1,1378 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Samsung's Exynos 8895 SoC pin-mux and pin-config device tree source
>> + *
>> + * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include "exynos-pinctrl.h"
>> +
>> +&pinctrl_alive {
>> +	gpa0: gpa0 {
> I do not believe this was tested. See maintainer SoC profile for Samsung
> Exynos.
>
> Limited review follows due to lack of testing.
>
>
>> +};
>> diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
>> new file mode 100644
>> index 000000000..3ed381ee5
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
>> @@ -0,0 +1,253 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Samsung's Exynos 8895 SoC device tree source
>> + *
>> + * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
>> +	compatible = "samsung,exynos8895";
>> +	#address-cells = <2>;
>> +	#size-cells = <1>;
>> +
>> +	interrupt-parent = <&gic>;
>> +
>> +	aliases {
>> +		pinctrl0 = &pinctrl_alive;
>> +		pinctrl1 = &pinctrl_abox;
>> +		pinctrl2 = &pinctrl_vts;
>> +		pinctrl3 = &pinctrl_fsys0;
>> +		pinctrl4 = &pinctrl_fsys1;
>> +		pinctrl5 = &pinctrl_busc;
>> +		pinctrl6 = &pinctrl_peric0;
>> +		pinctrl7 = &pinctrl_peric1;
>> +	};
>> +
>> +	arm-a53-pmu {
> Are there two pmus?

Hm. The Downstream kernel has them all under one node with compatible

'arm,armv8-pmuv3', same as with Exynos 7885. So it should have two PMUs,

one for each cluster.


Considering the second cluster consists of Samsung's custom Mongoose M2

cores, what would be the most adequate thing to do? Keep the first PMU as

"arm,cortex-a53-pmu" and use the SW model "arm,armv8-pmuv3" for the

second PMU? I doubt guessing if these mongoose cores are based on already

existing cortex cores is a great idea.

>> +		compatible = "arm,cortex-a53-pmu";
>> +		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
>> +		interrupt-affinity = <&cpu0>,
>> +				     <&cpu1>,
>> +				     <&cpu2>,
>> +				     <&cpu3>,
>> +				     <&cpu4>,
>> +				     <&cpu5>,
>> +				     <&cpu6>,
>> +				     <&cpu7>;
>> +	};
>> +
>> +	cpus {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		cpu-map {
>> +			cluster0 {
>> +				core0 {
>> +					cpu = <&cpu0>;
>> +				};
>> +				core1 {
>> +					cpu = <&cpu1>;
>> +				};
>> +				core2 {
>> +					cpu = <&cpu2>;
>> +				};
>> +				core3 {
>> +					cpu = <&cpu3>;
>> +				};
>> +			};
>> +
>> +			cluster1 {
>> +				core0 {
>> +					cpu = <&cpu4>;
>> +				};
>> +				core1 {
>> +					cpu = <&cpu5>;
>> +				};
>> +				core2 {
>> +					cpu = <&cpu6>;
>> +				};
>> +				core3 {
>> +					cpu = <&cpu7>;
>> +				};
>> +			};
>> +		};
>> +
>> +		cpu0: cpu@100 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a53";
>> +			reg = <0x100>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		cpu1: cpu@101 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a53";
>> +			reg = <0x101>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		cpu2: cpu@102 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a53";
>> +			reg = <0x102>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		cpu3: cpu@103 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a53";
>> +			reg = <0x103>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		cpu4: cpu@0 {
>> +			device_type = "cpu";
>> +			compatible = "samsung,mongoose-m2";
>> +			reg = <0x0>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		cpu5: cpu@1 {
>> +			device_type = "cpu";
>> +			compatible = "samsung,mongoose-m2";
>> +			reg = <0x1>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		cpu6: cpu@2 {
>> +			device_type = "cpu";
>> +			compatible = "samsung,mongoose-m2";
>> +			reg = <0x2>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		cpu7: cpu@3 {
>> +			device_type = "cpu";
>> +			compatible = "samsung,mongoose-m2";
>> +			reg = <0x3>;
>> +			enable-method = "psci";
>> +		};
>> +	};
>> +
>> +	psci {
>> +		compatible = "arm,psci";
>> +		method = "smc";
>> +		cpu_suspend = <0xc4000001>;
>> +		cpu_off = <0x84000002>;
>> +		cpu_on = <0xc4000003>;
>> +	};
>> +
>> +	timer {
>> +		compatible = "arm,armv8-timer";
>> +		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
>> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>> +		clock-frequency = <26000000>;
> Hm? I think this was explicitly disallowed.

It's weird. Without the clock-frequency property it fails early during the

boot process and I can't get any logs from pstore or simple-framebuffer.

Yet it's not set on similar platforms (exynos7885, autov9). Perhaps I

could alias the node and set it in the board device tree..? That doesn't

sound right.


Best regards,

Ivaylo

>> +	};
>> +
>> +	fixed-rate-clocks {
> Keep order of properties, just like DTS coding style asks.
>
> Anyway, fixed-rate-clocks wrapper is not needed, drop.
>
>> +		oscclk: osc-clock {
>> +			compatible = "fixed-clock";
>> +			#clock-cells = <0>;
>> +			clock-output-names = "oscclk";
>> +		};
>> +	};
>> +
>> +	soc: soc@0 {
>> +		compatible = "simple-bus";
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges = <0x0 0x0 0x0 0x20000000>;
>> +
>> +		chipid@10000000 {
>> +			compatible = "samsung,exynos8895-chipid",
>> +				     "samsung,exynos850-chipid";
>> +			reg = <0x10000000 0x24>;
>> +		};
>> +
>> +		gic: interrupt-controller@10200000 {
>> +			compatible = "arm,gic-400";
>> +			#interrupt-cells = <3>;
>> +			#address-cells = <0>;
>> +			interrupt-controller;
>> +			reg = <0x10201000 0x1000>,
>> +			      <0x10202000 0x1000>,
>> +			      <0x10204000 0x2000>,
>> +			      <0x10206000 0x2000>;
>> +			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
>> +						 IRQ_TYPE_LEVEL_HIGH)>;
>> +		};
>> +
>> +		pinctrl_alive: pinctrl@164b0000 {
>> +			compatible = "samsung,exynos8895-pinctrl";
>> +			reg = <0x164b0000 0x1000>;
>> +
>> +			wakeup-interrupt-controller {
>> +				compatible = "samsung,exynos8895-wakeup-eint",
>> +					     "samsung,exynos7-wakeup-eint";
>> +				interrupt-parent = <&gic>;
>> +				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
>> +			};
>> +		};
>> +
>> +		pinctrl_abox: pinctrl@13e60000 {
> This does not look ordered. See DTS coding style.
>
> Best regards,
> Krzysztof
>
Krzysztof Kozlowski Aug. 9, 2024, 5:49 a.m. UTC | #2 
On 07/08/2024 19:29, David Virag wrote:
> On Wed, 2024-08-07 at 14:20 +0300, Ivaylo Ivanov wrote:
>>
>> On 8/7/24 12:20, Krzysztof Kozlowski wrote:
>>> On 07/08/2024 10:28, ivo.ivanov.ivanov1@gmail.com wrote:
>>>> From: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
> [snip]
>>>>
>>>> +
>>>> +	timer {
>>>> +		compatible = "arm,armv8-timer";
>>>> +		/* Hypervisor Virtual Timer interrupt is not
>>>> wired to GIC */
>>>> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8)
>>>> | IRQ_TYPE_LEVEL_LOW)>,
>>>> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8)
>>>> | IRQ_TYPE_LEVEL_LOW)>,
>>>> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8)
>>>> | IRQ_TYPE_LEVEL_LOW)>,
>>>> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8)
>>>> | IRQ_TYPE_LEVEL_LOW)>;
>>>> +		clock-frequency = <26000000>;
>>> Hm? I think this was explicitly disallowed.
>>
>> It's weird. Without the clock-frequency property it fails early
>> during the
>>
>> boot process and I can't get any logs from pstore or simple-
>> framebuffer.
>>
>> Yet it's not set on similar platforms (exynos7885, autov9). Perhaps I
>>
>> could alias the node and set it in the board device tree..? That
>> doesn't
>>
>> sound right.
> 
> This sounds like CNTFRQ_EL0 is not set properly by the firmware.
> Now, if I read the documentation properly, this can be only set from
> EL3, which in your case is... not easy.
> 
> On my Galaxy A8 2018 (Exynos7885) I remember the old Android 8
> bootloader not being able to boot mainline, but Android 9 bootloaders
> did. I did not take the time to check if it was related to this, but it
> is my guess.
> 
> Your best bet is that maybe Samsung decided to fix this on the latest
> bootloader, and upgrading will fix it. (Though if it's already on an
> Android 9 based bootloader and it's still broken, my guess is a newer
> version won't fix it, but who knows)

If you can update your device to newer Android and it fixes the issue,
then please drop the property. If this does not work, then please add a
comment like: /* Non-updatable, broken stock Samsung bootloader does not
configure CNTFRQ_EL0 */

Best regards,
Krzysztof
Ivaylo Ivanov Aug. 18, 2024, 9:06 p.m. UTC | #3 
On 8/9/24 08:48, Krzysztof Kozlowski wrote:
> On 07/08/2024 13:20, Ivaylo Ivanov wrote:
>> On 8/7/24 12:20, Krzysztof Kozlowski wrote:
>>> On 07/08/2024 10:28, ivo.ivanov.ivanov1@gmail.com wrote:
>>>> From: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
>>>>
>>>> Exynos 8895 SoC is an ARMv8 mobile SoC found in the Samsung Galaxy
>>>> S8 (dreamlte), S8 Plus (dream2lte), Note 8 (greatlte) and the Meizu
>>>> 15 Plus (m1891). Add minimal support for that SoC, including:
>>>>
>>>> - All 8 cores via PSCI
>>>> - ChipID
>>>> - Generic ARMV8 Timer
>>>> - Enumarate all pinctrl nodes
>>>>
>>>> Further platform support will be added over time.
>>>>
>>>> Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
>>>> ---
>>>>  .../boot/dts/exynos/exynos8895-pinctrl.dtsi   | 1378 +++++++++++++++++
>>>>  arch/arm64/boot/dts/exynos/exynos8895.dtsi    |  253 +++
>>>>  2 files changed, 1631 insertions(+)
>>>>  create mode 100644 arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
>>>>  create mode 100644 arch/arm64/boot/dts/exynos/exynos8895.dtsi
>>>>
>>>> diff --git a/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
>>>> new file mode 100644
>>>> index 000000000..1dcb61e2e
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
>>>> @@ -0,0 +1,1378 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * Samsung's Exynos 8895 SoC pin-mux and pin-config device tree source
>>>> + *
>>>> + * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
>>>> + */
>>>> +
>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>> +#include "exynos-pinctrl.h"
>>>> +
>>>> +&pinctrl_alive {
>>>> +	gpa0: gpa0 {
>>> I do not believe this was tested. See maintainer SoC profile for Samsung
>>> Exynos.
>>>
>>> Limited review follows due to lack of testing.
>>>
>>>
>>>> +};
>>>> diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
>>>> new file mode 100644
>>>> index 000000000..3ed381ee5
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
>>>> @@ -0,0 +1,253 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * Samsung's Exynos 8895 SoC device tree source
>>>> + *
>>>> + * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
>>>> + */
>>>> +
>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>> +
>>>> +/ {
>>>> +	compatible = "samsung,exynos8895";
>>>> +	#address-cells = <2>;
>>>> +	#size-cells = <1>;
>>>> +
>>>> +	interrupt-parent = <&gic>;
>>>> +
>>>> +	aliases {
>>>> +		pinctrl0 = &pinctrl_alive;
>>>> +		pinctrl1 = &pinctrl_abox;
>>>> +		pinctrl2 = &pinctrl_vts;
>>>> +		pinctrl3 = &pinctrl_fsys0;
>>>> +		pinctrl4 = &pinctrl_fsys1;
>>>> +		pinctrl5 = &pinctrl_busc;
>>>> +		pinctrl6 = &pinctrl_peric0;
>>>> +		pinctrl7 = &pinctrl_peric1;
>>>> +	};
>>>> +
>>>> +	arm-a53-pmu {
>>> Are there two pmus?
>> Hm. The Downstream kernel has them all under one node with compatible
>>
>> 'arm,armv8-pmuv3', same as with Exynos 7885. So it should have two PMUs,
>>
>> one for each cluster.
>>
>>
>> Considering the second cluster consists of Samsung's custom Mongoose M2
>>
>> cores, what would be the most adequate thing to do? Keep the first PMU as
>>
>> "arm,cortex-a53-pmu" and use the SW model "arm,armv8-pmuv3" for the
>>
>> second PMU? I doubt guessing if these mongoose cores are based on already
>>
>> existing cortex cores is a great idea.
> I was just wondering why there is only one and called a53. I am not sure
> what should be for the second, but rather not a software model.
>
> Best regards,
> Krzysztof
>
Well, as far as I can tell there are 3 options:

- use an already defined PMU model for another core (ex. A73)

- submit another patch to add a custom mongoose-specific PMU model

- omit the mongoose cores PMU entirely

My guess is that omitting it entirely with a comment that mentions the

issue will be good enough, at least for now. Is that OK for the v3?


Best regards,

Ivaylo
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
new file mode 100644
index 000000000..1dcb61e2e
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
@@ -0,0 +1,1378 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Samsung's Exynos 8895 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa4: gpa4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	bt_hostwake: bt-hostwake {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus: uart1-bus {
+		samsung,pins = "gpa4-4", "gpa4-3", "gpa4-2", "gpa4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_default: uart1-default {
+		samsung,pins = "gpa4-4", "gpa4-3", "gpa4-2", "gpa4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	uart1_btsleep: uart1-btsleep {
+		samsung,pins = "gpa4-4", "gpa4-3", "gpa4-2", "gpa4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	pcie_wake: pcie_wake {
+		samsung,pins = "gpa3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	wlan_host_wake: wlan_host_wake{
+		  samsung,pins = "gpa0-7";
+		  samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		  samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		  samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		  samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_abox {
+	gph0: gph0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph3: gph3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_vts {
+	gph2: gph2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpi0: gpi0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpi1: gpi1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_rst_n: ufs-rst-n {
+		samsung,pins = "gpi0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out {
+		samsung,pins = "gpi0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpj0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpj0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpj0-3", "gpj0-4", "gpj0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	/* For Drive strength swapping */
+	sd2_clk_fast_slew_rate_1x: sd2-clk_fast_slew_rate_1x {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk_fast_slew_rate_2x {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk_fast_slew_rate_3x {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk_fast_slew_rate_4x {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	pcie0_clkreq: pcie0_clkreq {
+		samsung,pins = "gpj1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie0_clkreq_output: pcie0_clkreq_output {
+		samsung,pins = "gpj1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-val = <1>;
+	};
+
+	pcie0_perst: pcie0_perst {
+		samsung,pins = "gpj1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	cfg_wlanen: cfg-wlanen {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie1_clkreq: pcie1_clkreq {
+		samsung,pins = "gpj1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie1_clkreq_output: pcie1_clkreq_output {
+		samsung,pins = "gpj1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-val = <1>;
+	     };
+
+	pcie1_perst: pcie1_perst {
+		samsung,pins = "gpj1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	bt_en: bt-en {
+		samsung,pins ="gpj1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_btwake: bt-btwake {
+		samsung,pins = "gpj1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_busc {
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus {
+		samsung,pins = "gpb2-1", "gpb2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	speedy_bus: speedy-bus {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd3: gpd3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe7: gpe7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_bus: uart0-bus {
+		samsung,pins = "gpd0-7", "gpd0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_single: uart2-bus-single {
+		samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual {
+		samsung,pins = "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_single: uart3-bus-single {
+		samsung,pins = "gpd1-7", "gpd1-6", "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual {
+		samsung,pins = "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_single: uart4-bus-single {
+		samsung,pins = "gpd2-3", "gpd2-2", "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_single: uart5-bus-single {
+		samsung,pins = "gpd3-3", "gpd3-2", "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual {
+		samsung,pins = "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus {
+		samsung,pins = "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus {
+		samsung,pins = "gpd1-3", "gpd1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus {
+		samsung,pins = "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus {
+		samsung,pins = "gpd1-7", "gpd1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus {
+		samsung,pins = "gpd2-3", "gpd2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus {
+		samsung,pins = "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus {
+		samsung,pins = "gpd3-3", "gpd3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c14_bus: hs-i2c14-bus {
+		samsung,pins = "gpe6-3", "gpe6-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	spi2_cs: spi2-cs {
+		samsung,pins = "gpd1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi2_cs_func: spi2-cs-func {
+		samsung,pins = "gpd1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_bus: spi3-bus {
+		samsung,pins = "gpd1-7", "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_cs: spi3-cs {
+		samsung,pins = "gpd1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_cs_func: spi3-cs-func {
+		samsung,pins = "gpd1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi4_bus: spi4-bus {
+		samsung,pins = "gpd2-3", "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi4_cs: spi4-cs {
+		samsung,pins = "gpd2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi4_cs_func: spi4-cs-func {
+		samsung,pins = "gpd2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_bus: spi5-bus {
+		samsung,pins = "gpd3-3", "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_cs: spi5-cs {
+		samsung,pins = "gpd3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_cs_func: spi5-cs-func {
+		samsung,pins = "gpd3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	pwm_tout1: pwm-tout1 {
+		   samsung,pins = "gpd0-5";
+		   samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		   samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		   samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	motor_rst_n: motor_rst_n {
+		samsung,pins = "gpe7-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	motor_mode: motor_mode {
+		samsung,pins = "gpf1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe5: gpe5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe6: gpe6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe2: gpe2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe3: gpe3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe4: gpe4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart6_bus_single: uart6-bus-single {
+		samsung,pins = "gpe5-3", "gpe5-2", "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual {
+		samsung,pins = "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_single: uart7-bus-single {
+		samsung,pins = "gpe1-3", "gpe1-2", "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual {
+		samsung,pins = "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_single: uart8-bus-single {
+		samsung,pins = "gpe1-7", "gpe1-6", "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual {
+		samsung,pins = "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_single: uart9-bus-single {
+		samsung,pins = "gpe2-3", "gpe2-2", "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual {
+		samsung,pins = "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_single: uart10-bus-single {
+		samsung,pins = "gpe2-7", "gpe2-6", "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual {
+		samsung,pins = "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_single: uart11-bus-single {
+		samsung,pins = "gpe3-3", "gpe3-2", "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual {
+		samsung,pins = "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_single: uart12-bus-single {
+		samsung,pins = "gpe3-7", "gpe3-6", "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual {
+		samsung,pins = "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_single: uart13-bus-single {
+		samsung,pins = "gpe4-3", "gpe4-2", "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual {
+		samsung,pins = "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_single: uart14-bus-single {
+		samsung,pins = "gpe4-7", "gpe4-6", "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual {
+		samsung,pins = "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_single: uart15-bus-single {
+		samsung,pins = "gpe5-7", "gpe5-6", "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual {
+		samsung,pins = "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c1_bus_in: hsi2c1-bus-in {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus {
+		samsung,pins = "gpc2-3", "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	hsi2c2_bus_in: hsi2c2-bus-in {
+		samsung,pins = "gpc2-3", "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus {
+		samsung,pins = "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c3_bus_in: hsi2c3-bus-in {
+		samsung,pins = "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus {
+		samsung,pins = "gpc2-7", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c4_bus_in: hsi2c4-bus-in {
+		samsung,pins = "gpc2-7", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus {
+		samsung,pins = "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus {
+		samsung,pins = "gpe5-3", "gpe5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c15_bus: hsi2c15-bus {
+		samsung,pins = "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c16_bus: hsi2c16-bus {
+		samsung,pins = "gpe1-3", "gpe1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c17_bus: hsi2c17-bus {
+		samsung,pins = "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c18_bus: hsi2c18-bus {
+		samsung,pins = "gpe1-7", "gpe1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c19_bus: hsi2c19-bus {
+		samsung,pins = "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c20_bus: hsi2c20-bus {
+		samsung,pins = "gpe2-3", "gpe2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c21_bus: hsi2c21-bus {
+		samsung,pins = "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c22_bus: hsi2c22-bus {
+		samsung,pins = "gpe2-7", "gpe2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c23_bus: hsi2c23-bus {
+		samsung,pins = "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c24_bus: hsi2c24-bus {
+		samsung,pins = "gpe3-3", "gpe3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c25_bus: hsi2c25-bus {
+		samsung,pins = "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c26_bus: hsi2c26-bus {
+		samsung,pins = "gpe3-7", "gpe3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c27_bus: hsi2c27-bus {
+		samsung,pins = "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c27_bus_in: hsi2c27-bus-in {
+		samsung,pins = "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c28_bus: hsi2c28-bus {
+		samsung,pins = "gpe4-3", "gpe4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c28_bus_in: hsi2c28-bus-in {
+		samsung,pins = "gpe4-3", "gpe4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c29_bus: hsi2c29-bus {
+		samsung,pins = "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c30_bus: hsi2c30-bus {
+		samsung,pins = "gpe4-7", "gpe4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	hsi2c31_bus: hsi2c31-bus {
+		samsung,pins = "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c32_bus: hsi2c32-bus {
+		samsung,pins = "gpe5-7", "gpe5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpc3-3", "gpc3-2", "gpc3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_cs: spi0-cs {
+		samsung,pins = "gpc3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_cs_func: spi0-cs-func {
+		samsung,pins = "gpc3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpc3-7", "gpc3-6", "gpc3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_cs: spi1-cs {
+		samsung,pins = "gpc3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_cs_func: spi1-cs-func {
+		samsung,pins = "gpc3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_bus: spi6-bus {
+		samsung,pins = "gpe5-3", "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_cs: spi6-cs {
+		samsung,pins = "gpe5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_cs_func: spi6-cs-func {
+		samsung,pins = "gpe5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_bus: spi7-bus {
+		samsung,pins = "gpe1-3", "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_cs: spi7-cs {
+		samsung,pins = "gpe1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_cs_func: spi7-cs-func {
+		samsung,pins = "gpe1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_bus: spi8-bus {
+		samsung,pins = "gpe1-7", "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_bus_suspend: spi8-bus-suspend {
+		samsung,pins = "gpe1-7", "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;	/* INPUT */
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;	/* DOWN */
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_cs: spi8-cs {
+		samsung,pins = "gpe1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_cs_func: spi8-cs-func {
+		samsung,pins = "gpe1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_cs_func_suspend: spi8-cs-func-suspend {
+		samsung,pins = "gpe1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;	/* INPUT */
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;	/* DOWN */
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_bus: spi9-bus {
+		samsung,pins = "gpe2-3", "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_cs: spi9-cs {
+		samsung,pins = "gpe2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_cs_func: spi9-cs-func {
+		samsung,pins = "gpe2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_idle: spi9-idle {
+		samsung,pins = "gpe2-3", "gpe2-2", "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_bus: spi10-bus {
+		samsung,pins = "gpe2-7", "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_cs: spi10-cs {
+		samsung,pins = "gpe2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_cs_func: spi10-cs-func {
+		samsung,pins = "gpe2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_bus: spi11-bus {
+		samsung,pins = "gpe3-3", "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_cs: spi11-cs {
+		samsung,pins = "gpe3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_cs_func: spi11-cs-func {
+		samsung,pins = "gpe3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_bus: spi12-bus {
+		samsung,pins = "gpe3-7", "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_cs: spi12-cs {
+		samsung,pins = "gpe3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_cs_func: spi12-cs-func {
+		samsung,pins = "gpe3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_bus: spi13-bus {
+		samsung,pins = "gpe4-3", "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_cs: spi13-cs {
+		samsung,pins = "gpe4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_cs_func: spi13-cs-func {
+		samsung,pins = "gpe4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_bus: spi14-bus {
+		samsung,pins = "gpe4-7", "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_cs: spi14-cs {
+		samsung,pins = "gpe4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_cs_func: spi14-cs-func {
+		samsung,pins = "gpe4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_bus: spi15-bus {
+		samsung,pins = "gpe5-7", "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_cs: spi15-cs {
+		samsung,pins = "gpe5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_cs_func: spi15-cs-func {
+		samsung,pins = "gpe5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	decon_f_te_on: decon_f_te_on {
+		samsung,pins = "gpb0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+	};
+
+	decon_f_te_off: decon_f_te_off {
+		samsung,pins = "gpb0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+	};
+
+	hrm_irq: hrm-irq {
+		samsung,pins = "gpe6-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	hrm_irqsleep: hrm-irqsleep {
+		samsung,pins = "gpe6-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	hrm_irqidle: hrm-irqidle {
+		samsung,pins = "gpe6-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
new file mode 100644
index 000000000..3ed381ee5
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
@@ -0,0 +1,253 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Samsung's Exynos 8895 SoC device tree source
+ *
+ * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos8895";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_abox;
+		pinctrl2 = &pinctrl_vts;
+		pinctrl3 = &pinctrl_fsys0;
+		pinctrl4 = &pinctrl_fsys1;
+		pinctrl5 = &pinctrl_busc;
+		pinctrl6 = &pinctrl_peric0;
+		pinctrl7 = &pinctrl_peric1;
+	};
+
+	arm-a53-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>,
+				     <&cpu4>,
+				     <&cpu5>,
+				     <&cpu6>,
+				     <&cpu7>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@0 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@1 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@2 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@3 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <26000000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk: osc-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "oscclk";
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos8895-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		gic: interrupt-controller@10200000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x10201000 0x1000>,
+			      <0x10202000 0x1000>,
+			      <0x10204000 0x2000>,
+			      <0x10206000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		pinctrl_alive: pinctrl@164b0000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x164b0000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos8895-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_abox: pinctrl@13e60000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x13e60000 0x1000>;
+		};
+
+		pinctrl_vts: pinctrl@14080000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x14080000 0x1000>;
+		};
+
+		pinctrl_fsys0: pinctrl@11050000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x11050000 0x1000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys1: pinctrl@11430000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x11430000 0x1000>;
+			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_busc: pinctrl@15a30000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x15a30000 0x1000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric0: pinctrl@104d0000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x104d0000 0x1000>;
+			interrupts = <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric1: pinctrl@10980000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x10980000 0x1000>;
+			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmu_system_controller: system-controller@16480000 {
+			compatible = "samsung,exynos8895-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x16480000 0x10000>;
+		};
+	};
+};
+
+#include "exynos8895-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"