diff mbox series

[1/2] dt-bindings: media: camss: Add qcom,sm8550-camss binding

Message ID 20240807053400.1916581-2-quic_depengs@quicinc.com
State Superseded
Headers show
Series Add sm8550 CAMSS core dtsi | expand

Commit Message

Depeng Shao Aug. 7, 2024, 5:33 a.m. UTC
Add bindings for qcom,sm8550-camss in order to support the camera
subsystem for sm8550.

Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
---
 .../bindings/media/qcom,sm8550-camss.yaml     | 517 ++++++++++++++++++
 1 file changed, 517 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml

Comments

Krzysztof Kozlowski Aug. 7, 2024, 5:52 a.m. UTC | #1
On 07/08/2024 07:33, Depeng Shao wrote:
> Add bindings for qcom,sm8550-camss in order to support the camera
> subsystem for sm8550.
> 
> Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
> Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>

Why are you duplicating the bindings? This was already sent and was
reviewed. Asking us to review the same thing twice is WASTE of time.

NAK.

Best regards,
Krzysztof
Depeng Shao Aug. 7, 2024, 6:03 a.m. UTC | #2
On 8/7/2024 1:52 PM, Krzysztof Kozlowski wrote:
> On 07/08/2024 07:33, Depeng Shao wrote:
>> Add bindings for qcom,sm8550-camss in order to support the camera
>> subsystem for sm8550.
>>
>> Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
>> Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
>> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
> 
> Why are you duplicating the bindings? This was already sent and was
> reviewed. Asking us to review the same thing twice is WASTE of time.
> 

Hi Krzysztof,

I refer to the patches for sc8280xp, since I see the drivers and dtsi 
patches both have bindings, so I do the same, will resend the patch to 
drop the bindings in this change.

https://lore.kernel.org/all/20240222-b4-camss-sc8280xp-v6-0-0e0e6a2f8962@linaro.org/

https://lore.kernel.org/all/20240109-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v3-0-b8e3a74a6e6a@linaro.org/


And, I also made a mistake when sending this series, I lost a 'l' for 
linux-media@vger.kernel.org, and also need to remove 
konrad.dybcio@linaro.ory, since I got a mail which said "Konrad Dybcio 
no longer works for Linaro".


Thanks,
Depeng
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml
new file mode 100644
index 000000000000..2d6c5a42eeda
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml
@@ -0,0 +1,517 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sm8550-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Depeng Shao <quic_depengs@quicinc.com>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sm8550-camss
+
+  reg:
+    maxItems: 19
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csid_top
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: csiphy6
+      - const: csiphy7
+      - const: vfe0
+      - const: vfe1
+      - const: vfe2
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  clocks:
+    maxItems: 36
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: cpas_fast_ahb_clk
+      - const: cpas_ife_lite
+      - const: cpas_vfe0
+      - const: cpas_vfe1
+      - const: cpas_vfe2
+      - const: csid
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy4
+      - const: csiphy4_timer
+      - const: csiphy5
+      - const: csiphy5_timer
+      - const: csiphy6
+      - const: csiphy6_timer
+      - const: csiphy7
+      - const: csiphy7_timer
+      - const: csiphy_rx
+      - const: vfe0
+      - const: vfe0_fast_ahb
+      - const: vfe1
+      - const: vfe1_fast_ahb
+      - const: vfe2
+      - const: vfe2_fast_ahb
+      - const: vfe_lite
+      - const: vfe_lite_ahb
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+      - const: gcc_axi_hf
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: ahb
+      - const: hf_0_mnoc
+      - const: icp_mnoc
+      - const: sf_0_mnoc
+
+  interrupts:
+    maxItems: 18
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: csiphy6
+      - const: csiphy7
+      - const: vfe0
+      - const: vfe1
+      - const: vfe2
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: ife0
+      - const: ife1
+      - const: ife2
+      - const: top
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.2V regulator supply to PHY refclk pll block.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@5:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interconnects
+  - interconnect-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - reg
+  - reg-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,sm8550-camcc.h>
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        camss: camss@ace4000 {
+            compatible = "qcom,sm8550-camss";
+
+            reg = <0 0x0acb7000 0 0xd00>,
+                  <0 0x0acb9000 0 0xd00>,
+                  <0 0x0acbb000 0 0xd00>,
+                  <0 0x0acca000 0 0xa00>,
+                  <0 0x0acce000 0 0xa00>,
+                  <0 0x0acb6000 0 0x1000>,
+                  <0 0x0ace4000 0 0x2000>,
+                  <0 0x0ace6000 0 0x2000>,
+                  <0 0x0ace8000 0 0x2000>,
+                  <0 0x0acea000 0 0x2000>,
+                  <0 0x0acec000 0 0x2000>,
+                  <0 0x0acee000 0 0x2000>,
+                  <0 0x0acf0000 0 0x2000>,
+                  <0 0x0acf2000 0 0x2000>,
+                  <0 0x0ac62000 0 0xf000>,
+                  <0 0x0ac71000 0 0xf000>,
+                  <0 0x0ac80000 0 0xf000>,
+                  <0 0x0accb000 0 0x2800>,
+                  <0 0x0accf000 0 0x2800>;
+            reg-names = "csid0",
+                        "csid1",
+                        "csid2",
+                        "csid_lite0",
+                        "csid_lite1",
+                        "csid_top",
+                        "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "csiphy3",
+                        "csiphy4",
+                        "csiphy5",
+                        "csiphy6",
+                        "csiphy7",
+                        "vfe0",
+                        "vfe1",
+                        "vfe2",
+                        "vfe_lite0",
+                        "vfe_lite1";
+
+            clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_2_CLK>,
+                     <&camcc CAM_CC_CSID_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY3_CLK>,
+                     <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY4_CLK>,
+                     <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY5_CLK>,
+                     <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY6_CLK>,
+                     <&camcc CAM_CC_CSI6PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY7_CLK>,
+                     <&camcc CAM_CC_CSI7PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_2_CLK>,
+                     <&camcc CAM_CC_IFE_2_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>;
+
+            clock-names = "camnoc_axi",
+                          "cpas_ahb",
+                          "cpas_fast_ahb_clk",
+                          "cpas_ife_lite",
+                          "cpas_vfe0",
+                          "cpas_vfe1",
+                          "cpas_vfe2",
+                          "csid",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy3",
+                          "csiphy3_timer",
+                          "csiphy4",
+                          "csiphy4_timer",
+                          "csiphy5",
+                          "csiphy5_timer",
+                          "csiphy6",
+                          "csiphy6_timer",
+                          "csiphy7",
+                          "csiphy7_timer",
+                          "csiphy_rx",
+                          "vfe0",
+                          "vfe0_fast_ahb",
+                          "vfe1",
+                          "vfe1_fast_ahb",
+                          "vfe2",
+                          "vfe2_fast_ahb",
+                          "vfe_lite",
+                          "vfe_lite_ahb",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_csid",
+                          "gcc_axi_hf";
+
+            interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>,
+                            <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>,
+                            <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>,
+                            <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>;
+            interconnect-names = "ahb",
+                                 "hf_0_mnoc",
+                                 "icp_mnoc",
+                                 "sf_0_mnoc";
+
+            interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csid2",
+                              "csid_lite0",
+                              "csid_lite1",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csiphy3",
+                              "csiphy4",
+                              "csiphy5",
+                              "csiphy6",
+                              "csiphy7",
+                              "vfe0",
+                              "vfe1",
+                              "vfe2",
+                              "vfe_lite0",
+                              "vfe_lite1";
+
+            iommus = <&apps_smmu 0x800 0x20>;
+
+            power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+                            <&camcc CAM_CC_IFE_1_GDSC>,
+                            <&camcc CAM_CC_IFE_2_GDSC>,
+                            <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+            power-domain-names = "ife0",
+                                 "ife1",
+                                 "ife2",
+                                 "top";
+
+            vdda-phy-supply = <&vreg_l1e_0p88>;
+            vdda-pll-supply = <&vreg_l3e_1p2>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    csiphy_ep0: endpoint@0 {
+                        reg = <0>;
+                        clock-lanes = <7>;
+                        data-lanes = <0 1>;
+                        remote-endpoint = <&sensor_ep>;
+                    };
+                };
+            };
+        };
+    };