diff mbox series

[V3,8/8] arm64: dts: qcom: Add camera clock controller for sm8150

Message ID 20240731062916.2680823-9-quic_skakitap@quicinc.com
State Accepted
Commit f75537a42afbbe3f652c73493741448586df7719
Headers show
Series [V3,1/8] clk: qcom: clk-alpha-pll: Fix the pll post div mask | expand

Commit Message

Satya Priya Kakitapalli July 31, 2024, 6:29 a.m. UTC
Add device node for camera clock controller on Qualcomm
SM8150 platform.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sa8155p.dtsi |  4 ++++
 arch/arm64/boot/dts/qcom/sm8150.dtsi  | 13 +++++++++++++
 2 files changed, 17 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8155p.dtsi b/arch/arm64/boot/dts/qcom/sa8155p.dtsi
index 9e70effc72e1..d678ed822378 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8155p.dtsi
@@ -9,6 +9,10 @@ 
 
 #include "sm8150.dtsi"
 
+&camcc {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
+
 &dispcc {
 	power-domains = <&rpmhpd SA8155P_CX>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 3e236adb9397..27f87835bc55 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -17,6 +17,7 @@ 
 #include <dt-bindings/clock/qcom,videocc-sm8150.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sm8150.h>
+#include <dt-bindings/clock/qcom,sm8150-camcc.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -3759,6 +3760,18 @@  camnoc_virt: interconnect@ac00000 {
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sm8150-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_CAMERA_AHB_CLK>;
+			power-domains = <&rpmhpd SM8150_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sm8150-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;