diff mbox series

[6/8] usb: misc: eud: Add High-Speed Phy control for EUD operations

Message ID 20240730222439.3469-7-quic_eserrao@quicinc.com
State New
Headers show
Series None | expand

Commit Message

Elson Roy Serrao July 30, 2024, 10:24 p.m. UTC
The Embedded USB Debugger(EUD) is a HS-USB on-chip hub to support the
debug and trace capabilities on Qualcomm devices. It is physically
present in between the usb connector and the usb controller. Being a
HS USB hub, it relies on HS Phy for its functionality. Add HS phy
support in the eud driver and control the phy during eud enable/disable
operations.

Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
---
 drivers/usb/misc/qcom_eud.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)
diff mbox series

Patch

diff --git a/drivers/usb/misc/qcom_eud.c b/drivers/usb/misc/qcom_eud.c
index 26e9b8749d8a..3de7d465912c 100644
--- a/drivers/usb/misc/qcom_eud.c
+++ b/drivers/usb/misc/qcom_eud.c
@@ -11,6 +11,7 @@ 
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/sysfs.h>
@@ -33,6 +34,7 @@ 
 struct eud_chip {
 	struct device			*dev;
 	struct usb_role_switch		*role_sw;
+	struct phy			*usb2_phy;
 	void __iomem			*base;
 	void __iomem			*mode_mgr;
 	unsigned int			int_status;
@@ -41,8 +43,35 @@  struct eud_chip {
 	bool				usb_attached;
 };
 
+static int eud_phy_enable(struct eud_chip *chip)
+{
+	int ret;
+
+	ret = phy_init(chip->usb2_phy);
+	if (ret)
+		return ret;
+
+	ret = phy_power_on(chip->usb2_phy);
+	if (ret)
+		phy_exit(chip->usb2_phy);
+
+	return ret;
+}
+
+static void eud_phy_disable(struct eud_chip *chip)
+{
+	phy_power_off(chip->usb2_phy);
+	phy_exit(chip->usb2_phy);
+}
+
 static int enable_eud(struct eud_chip *priv)
 {
+	int ret;
+
+	ret = eud_phy_enable(priv);
+	if (ret)
+		return ret;
+
 	writel(EUD_ENABLE, priv->base + EUD_REG_CSR_EUD_EN);
 	writel(EUD_INT_VBUS | EUD_INT_SAFE_MODE,
 			priv->base + EUD_REG_INT1_EN_MASK);
@@ -55,6 +84,7 @@  static void disable_eud(struct eud_chip *priv)
 {
 	writel(0, priv->base + EUD_REG_CSR_EUD_EN);
 	writel(0, priv->mode_mgr + EUD_REG_EUD_EN2);
+	eud_phy_disable(priv);
 }
 
 static ssize_t enable_show(struct device *dev,
@@ -186,6 +216,11 @@  static int eud_probe(struct platform_device *pdev)
 
 	chip->dev = &pdev->dev;
 
+	chip->usb2_phy = devm_phy_get(chip->dev, "usb2-phy");
+	if (IS_ERR(chip->usb2_phy))
+		return dev_err_probe(chip->dev, PTR_ERR(chip->usb2_phy),
+				     "no usb2 phy configured\n");
+
 	chip->role_sw = usb_role_switch_get(&pdev->dev);
 	if (IS_ERR(chip->role_sw))
 		return dev_err_probe(chip->dev, PTR_ERR(chip->role_sw),