@@ -199,6 +199,20 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
return 0;
}
+int mmc_send_ext_addr(struct mmc_host *host, u8 ext_addr)
+{
+ struct mmc_command cmd = {};
+
+ if (!mmc_card_is_sduc(host))
+ return 0;
+
+ cmd.opcode = SD_ADDR_EXT;
+ cmd.arg = ext_addr & 0x3F;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+ return mmc_wait_for_cmd(host, &cmd, 0);
+}
+
static int __mmc_send_if_cond(struct mmc_host *host, u32 ocr, u8 pcie_bits,
u32 *resp)
{
@@ -21,6 +21,7 @@ int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca);
int mmc_app_send_scr(struct mmc_card *card);
int mmc_app_sd_status(struct mmc_card *card, void *ssr);
int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card);
+int mmc_send_ext_addr(struct mmc_host *host, u8 ext_addr);
#endif
@@ -15,6 +15,9 @@
#define SD_SEND_IF_COND 8 /* bcr [11:0] See below R7 */
#define SD_SWITCH_VOLTAGE 11 /* ac R1 */
+/* Class 2 */
+#define SD_ADDR_EXT 22 /* ac [5:0] R1 */
+
/* class 10 */
#define SD_SWITCH 6 /* adtc [31:0] See below R1 */
SDUC memory addressing spans beyond 2TB and up to 128TB. Therefore, 38 bits are required to access the entire memory space of all sectors. Those extra 6 bits are to be carried by CMD22 prior of sending read/write/erase commands: CMD17, CMD18, CMD24, CMD25, CMD32, and CMD33. CMD22 will carry the higher order 6 bits, and must precedes any of the above commands even if it targets sector < 2TB. No error related to address or length is indicated in CMD22 but rather in the read/write command itself. Signed-off-by: Avri Altman <avri.altman@wdc.com> --- drivers/mmc/core/sd_ops.c | 14 ++++++++++++++ drivers/mmc/core/sd_ops.h | 1 + include/linux/mmc/sd.h | 3 +++ 3 files changed, 18 insertions(+)