diff mbox series

[PULL,12/26] hw/arm/smmu-common: Rework TLB lookup for nesting

Message ID 20240718132028.697927-13-peter.maydell@linaro.org
State Accepted
Commit 7eb57be1efb8cdcf613fd8b089295ed5a4f48d7d
Headers show
Series [PULL,01/26] target/arm: Fix handling of LDAPR/STLR with negative offset | expand

Commit Message

Peter Maydell July 18, 2024, 1:20 p.m. UTC
From: Mostafa Saleh <smostafa@google.com>

In the next patch, combine_tlb() will be added which combines 2 TLB
entries into one for nested translations, which chooses the granule
and level from the smallest entry.

This means that with nested translation, an entry can be cached with
the granule of stage-2 and not stage-1.

However, currently, the lookup for an IOVA is done with input stage
granule, which is stage-1 for nested configuration, which will not
work with the above logic.
This patch reworks lookup in that case, so it falls back to stage-2
granule if no entry is found using stage-1 granule.

Also, drop aligning the iova to avoid over-aligning in case the iova
is cached with a smaller granule, the TLB lookup will align the iova
anyway for each granule and level, and the page table walker doesn't
consider the page offset bits.

Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-10-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/smmu-common.c | 64 +++++++++++++++++++++++++++++---------------
 1 file changed, 43 insertions(+), 21 deletions(-)
diff mbox series

Patch

diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c
index 7fbf8e22fe0..e374cae0db6 100644
--- a/hw/arm/smmu-common.c
+++ b/hw/arm/smmu-common.c
@@ -66,8 +66,10 @@  SMMUIOTLBKey smmu_get_iotlb_key(int asid, int vmid, uint64_t iova,
     return key;
 }
 
-SMMUTLBEntry *smmu_iotlb_lookup(SMMUState *bs, SMMUTransCfg *cfg,
-                                SMMUTransTableInfo *tt, hwaddr iova)
+static SMMUTLBEntry *smmu_iotlb_lookup_all_levels(SMMUState *bs,
+                                                  SMMUTransCfg *cfg,
+                                                  SMMUTransTableInfo *tt,
+                                                  hwaddr iova)
 {
     uint8_t tg = (tt->granule_sz - 10) / 2;
     uint8_t inputsize = 64 - tt->tsz;
@@ -88,6 +90,36 @@  SMMUTLBEntry *smmu_iotlb_lookup(SMMUState *bs, SMMUTransCfg *cfg,
         }
         level++;
     }
+    return entry;
+}
+
+/**
+ * smmu_iotlb_lookup - Look up for a TLB entry.
+ * @bs: SMMU state which includes the TLB instance
+ * @cfg: Configuration of the translation
+ * @tt: Translation table info (granule and tsz)
+ * @iova: IOVA address to lookup
+ *
+ * returns a valid entry on success, otherwise NULL.
+ * In case of nested translation, tt can be updated to include
+ * the granule of the found entry as it might different from
+ * the IOVA granule.
+ */
+SMMUTLBEntry *smmu_iotlb_lookup(SMMUState *bs, SMMUTransCfg *cfg,
+                                SMMUTransTableInfo *tt, hwaddr iova)
+{
+    SMMUTLBEntry *entry = NULL;
+
+    entry = smmu_iotlb_lookup_all_levels(bs, cfg, tt, iova);
+    /*
+     * For nested translation also try the s2 granule, as the TLB will insert
+     * it if the size of s2 tlb entry was smaller.
+     */
+    if (!entry && (cfg->stage == SMMU_NESTED) &&
+        (cfg->s2cfg.granule_sz != tt->granule_sz)) {
+        tt->granule_sz = cfg->s2cfg.granule_sz;
+        entry = smmu_iotlb_lookup_all_levels(bs, cfg, tt, iova);
+    }
 
     if (entry) {
         cfg->iotlb_hits++;
@@ -569,18 +601,21 @@  int smmu_ptw(SMMUTransCfg *cfg, dma_addr_t iova, IOMMUAccessFlags perm,
 SMMUTLBEntry *smmu_translate(SMMUState *bs, SMMUTransCfg *cfg, dma_addr_t addr,
                              IOMMUAccessFlags flag, SMMUPTWEventInfo *info)
 {
-    uint64_t page_mask, aligned_addr;
     SMMUTLBEntry *cached_entry = NULL;
     SMMUTransTableInfo *tt;
     int status;
 
     /*
-     * Combined attributes used for TLB lookup, as only one stage is supported,
-     * it will hold attributes based on the enabled stage.
+     * Combined attributes used for TLB lookup, holds the attributes for
+     * the input stage.
      */
     SMMUTransTableInfo tt_combined;
 
-    if (cfg->stage == SMMU_STAGE_1) {
+    if (cfg->stage == SMMU_STAGE_2) {
+        /* Stage2. */
+        tt_combined.granule_sz = cfg->s2cfg.granule_sz;
+        tt_combined.tsz = cfg->s2cfg.tsz;
+    } else {
         /* Select stage1 translation table. */
         tt = select_tt(cfg, addr);
         if (!tt) {
@@ -590,22 +625,9 @@  SMMUTLBEntry *smmu_translate(SMMUState *bs, SMMUTransCfg *cfg, dma_addr_t addr,
         }
         tt_combined.granule_sz = tt->granule_sz;
         tt_combined.tsz = tt->tsz;
-
-    } else {
-        /* Stage2. */
-        tt_combined.granule_sz = cfg->s2cfg.granule_sz;
-        tt_combined.tsz = cfg->s2cfg.tsz;
     }
 
-    /*
-     * TLB lookup looks for granule and input size for a translation stage,
-     * as only one stage is supported right now, choose the right values
-     * from the configuration.
-     */
-    page_mask = (1ULL << tt_combined.granule_sz) - 1;
-    aligned_addr = addr & ~page_mask;
-
-    cached_entry = smmu_iotlb_lookup(bs, cfg, &tt_combined, aligned_addr);
+    cached_entry = smmu_iotlb_lookup(bs, cfg, &tt_combined, addr);
     if (cached_entry) {
         if ((flag & IOMMU_WO) && !(cached_entry->entry.perm & IOMMU_WO)) {
             info->type = SMMU_PTW_ERR_PERMISSION;
@@ -616,7 +638,7 @@  SMMUTLBEntry *smmu_translate(SMMUState *bs, SMMUTransCfg *cfg, dma_addr_t addr,
     }
 
     cached_entry = g_new0(SMMUTLBEntry, 1);
-    status = smmu_ptw(cfg, aligned_addr, flag, cached_entry, info);
+    status = smmu_ptw(cfg, addr, flag, cached_entry, info);
     if (status) {
             g_free(cached_entry);
             return NULL;