| Message ID | ZpV7OeGNIGGpqNC0@windev.fritz.box |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: qcom: x1e80100-yoga: add wifi calibration variant | expand |
Am Tue, Jul 16, 2024 at 12:51:53AM +0300 schrieb Dmitry Baryshkov: > On Mon, Jul 15, 2024 at 09:40:41PM GMT, Patrick Wildt wrote: > > Describe the bus topology for PCIe domain 4 and add the ath12k > > calibration variant so that the board file (calibration data) can be > > loaded. > > > > Signed-off-by: Patrick Wildt <patrick@blueri.se> > > --- > > .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 9 +++++++++ > > arch/arm64/boot/dts/qcom/x1e80100.dtsi | 10 ++++++++++ > > 2 files changed, 19 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts > > index fbff558f5b07..f569f0fbd1fc 100644 > > --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts > > +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts > > @@ -635,6 +635,15 @@ &pcie4_phy { > > status = "okay"; > > }; > > > > +&pcie4_port0 { > > + wifi@0 { > > + compatible = "pci17cb,1107"; > > + reg = <0x10000 0x0 0x0 0x0 0x0>; > > + > > + qcom,ath12k-calibration-variant = "LES790"; > > It doesn't look like it follows the rest of the calibration variants. > > Something like "Lenovo_Y7x" or "Lenovo_Yoga7x" sounds more logical. This is what's both in the DSDT Device (WLN) { [...] Name (BDFE, "BDF_LES790") and kvalo's board-2.bin for this machine: $ strings board-2.bin | grep LES bus=pci,vendor=17cb,device=1107,subsystem-vendor=17aa,subsystem-device=e0e9,qmi-chip-id=2,qmi-board-id=255,variant=LES790 I don't think we can hand-pick these strings, they come from whoever decided upon them and fed them into ACPI tables and QC's binaries.
On 16.07.2024 12:01 AM, Patrick Wildt wrote: > Am Tue, Jul 16, 2024 at 12:51:53AM +0300 schrieb Dmitry Baryshkov: >> On Mon, Jul 15, 2024 at 09:40:41PM GMT, Patrick Wildt wrote: >>> Describe the bus topology for PCIe domain 4 and add the ath12k >>> calibration variant so that the board file (calibration data) can be >>> loaded. >>> >>> Signed-off-by: Patrick Wildt <patrick@blueri.se> >>> --- >>> .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 9 +++++++++ >>> arch/arm64/boot/dts/qcom/x1e80100.dtsi | 10 ++++++++++ >>> 2 files changed, 19 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts >>> index fbff558f5b07..f569f0fbd1fc 100644 >>> --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts >>> +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts >>> @@ -635,6 +635,15 @@ &pcie4_phy { >>> status = "okay"; >>> }; >>> >>> +&pcie4_port0 { >>> + wifi@0 { >>> + compatible = "pci17cb,1107"; >>> + reg = <0x10000 0x0 0x0 0x0 0x0>; >>> + >>> + qcom,ath12k-calibration-variant = "LES790"; >> >> It doesn't look like it follows the rest of the calibration variants. >> >> Something like "Lenovo_Y7x" or "Lenovo_Yoga7x" sounds more logical. > > This is what's both in the DSDT > > Device (WLN) > { > [...] > Name (BDFE, "BDF_LES790") > > and kvalo's board-2.bin for this machine: > > $ strings board-2.bin | grep LES > bus=pci,vendor=17cb,device=1107,subsystem-vendor=17aa,subsystem-device=e0e9,qmi-chip-id=2,qmi-board-id=255,variant=LES790 > > I don't think we can hand-pick these strings, they come from whoever > decided upon them and fed them into ACPI tables and QC's binaries. Huh, great nod from qca! Looks like there's even a bit more hw supported in there.. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
On Mon, Jul 15, 2024 at 09:40:41PM +0200, Patrick Wildt wrote: > Describe the bus topology for PCIe domain 4 and add the ath12k > calibration variant so that the board file (calibration data) can be > loaded. > > Signed-off-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> - Mani > --- > .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 9 +++++++++ > arch/arm64/boot/dts/qcom/x1e80100.dtsi | 10 ++++++++++ > 2 files changed, 19 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts > index fbff558f5b07..f569f0fbd1fc 100644 > --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts > +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts > @@ -635,6 +635,15 @@ &pcie4_phy { > status = "okay"; > }; > > +&pcie4_port0 { > + wifi@0 { > + compatible = "pci17cb,1107"; > + reg = <0x10000 0x0 0x0 0x0 0x0>; > + > + qcom,ath12k-calibration-variant = "LES790"; > + }; > +}; > + > &pcie6a { > perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; > wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; > diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi > index 7bca5fcd7d52..70eeacd4f9ad 100644 > --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi > +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi > @@ -3085,6 +3085,16 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > phy-names = "pciephy"; > > status = "disabled"; > + > + pcie4_port0: pcie@0 { > + device_type = "pci"; > + reg = <0x0 0x0 0x0 0x0 0x0>; > + bus-range = <0x01 0xff>; > + > + #address-cells = <3>; > + #size-cells = <2>; > + ranges; > + }; > }; > > pcie4_phy: phy@1c0e000 { > -- > 2.45.2 > >
On Tue, Jul 16, 2024 at 12:01:28AM GMT, Patrick Wildt wrote: > Am Tue, Jul 16, 2024 at 12:51:53AM +0300 schrieb Dmitry Baryshkov: > > On Mon, Jul 15, 2024 at 09:40:41PM GMT, Patrick Wildt wrote: > > > Describe the bus topology for PCIe domain 4 and add the ath12k > > > calibration variant so that the board file (calibration data) can be > > > loaded. > > > > > > Signed-off-by: Patrick Wildt <patrick@blueri.se> > > > --- > > > .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 9 +++++++++ > > > arch/arm64/boot/dts/qcom/x1e80100.dtsi | 10 ++++++++++ > > > 2 files changed, 19 insertions(+) > > > > > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts > > > index fbff558f5b07..f569f0fbd1fc 100644 > > > --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts > > > +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts > > > @@ -635,6 +635,15 @@ &pcie4_phy { > > > status = "okay"; > > > }; > > > > > > +&pcie4_port0 { > > > + wifi@0 { > > > + compatible = "pci17cb,1107"; > > > + reg = <0x10000 0x0 0x0 0x0 0x0>; > > > + > > > + qcom,ath12k-calibration-variant = "LES790"; > > > > It doesn't look like it follows the rest of the calibration variants. > > > > Something like "Lenovo_Y7x" or "Lenovo_Yoga7x" sounds more logical. > > This is what's both in the DSDT > > Device (WLN) > { > [...] > Name (BDFE, "BDF_LES790") > > and kvalo's board-2.bin for this machine: > > $ strings board-2.bin | grep LES > bus=pci,vendor=17cb,device=1107,subsystem-vendor=17aa,subsystem-device=e0e9,qmi-chip-id=2,qmi-board-id=255,variant=LES790 > > I don't think we can hand-pick these strings, they come from whoever > decided upon them and fed them into ACPI tables and QC's binaries. Ack, if Kalle has already selected this string, we can't argue. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts index fbff558f5b07..f569f0fbd1fc 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts @@ -635,6 +635,15 @@ &pcie4_phy { status = "okay"; }; +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + qcom,ath12k-calibration-variant = "LES790"; + }; +}; + &pcie6a { perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index 7bca5fcd7d52..70eeacd4f9ad 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -3085,6 +3085,16 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, phy-names = "pciephy"; status = "disabled"; + + pcie4_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie4_phy: phy@1c0e000 {
Describe the bus topology for PCIe domain 4 and add the ath12k calibration variant so that the board file (calibration data) can be loaded. Signed-off-by: Patrick Wildt <patrick@blueri.se> --- .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 9 +++++++++ arch/arm64/boot/dts/qcom/x1e80100.dtsi | 10 ++++++++++ 2 files changed, 19 insertions(+)