@@ -5,6 +5,7 @@
* USB-C module to reduce wakeups due to contaminants.
*/
+#include <linux/bitfield.h>
#include <linux/device.h>
#include <linux/irqreturn.h>
#include <linux/module.h>
@@ -48,11 +49,8 @@ enum fladc_select {
#define STATUS_CHECK(reg, mask, val) (((reg) & (mask)) == (val))
#define IS_CC_OPEN(cc_status) \
- (STATUS_CHECK((cc_status), TCPC_CC_STATUS_CC1_MASK << TCPC_CC_STATUS_CC1_SHIFT, \
- TCPC_CC_STATE_SRC_OPEN) && STATUS_CHECK((cc_status), \
- TCPC_CC_STATUS_CC2_MASK << \
- TCPC_CC_STATUS_CC2_SHIFT, \
- TCPC_CC_STATE_SRC_OPEN))
+ (FIELD_GET(TCPC_CC_STATUS_CC1, cc_status) == TCPC_CC_STATE_SRC_OPEN \
+ && FIELD_GET(TCPC_CC_STATUS_CC2, cc_status) == TCPC_CC_STATE_SRC_OPEN)
static int max_contaminant_adc_to_mv(struct max_tcpci_chip *chip, enum fladc_select channel,
bool ua_src, u8 fladc)
@@ -5,6 +5,7 @@
* USB Type-C Port Controller Interface.
*/
+#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -241,12 +242,10 @@ static int tcpci_get_cc(struct tcpc_dev *tcpc,
if (ret < 0)
return ret;
- *cc1 = tcpci_to_typec_cc((reg >> TCPC_CC_STATUS_CC1_SHIFT) &
- TCPC_CC_STATUS_CC1_MASK,
+ *cc1 = tcpci_to_typec_cc(FIELD_GET(TCPC_CC_STATUS_CC1, reg),
reg & TCPC_CC_STATUS_TERM ||
tcpc_presenting_rd(role_control, CC1));
- *cc2 = tcpci_to_typec_cc((reg >> TCPC_CC_STATUS_CC2_SHIFT) &
- TCPC_CC_STATUS_CC2_MASK,
+ *cc2 = tcpci_to_typec_cc(FIELD_GET(TCPC_CC_STATUS_CC2, reg),
reg & TCPC_CC_STATUS_TERM ||
tcpc_presenting_rd(role_control, CC2));
@@ -5,6 +5,7 @@
* Richtek RT1711H Type-C Chip Driver
*/
+#include <linux/bitfield.h>
#include <linux/bits.h>
#include <linux/kernel.h>
#include <linux/mod_devicetable.h>
@@ -195,12 +196,10 @@ static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status)
if (ret < 0)
return ret;
- cc1 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC1_SHIFT) &
- TCPC_CC_STATUS_CC1_MASK,
+ cc1 = tcpci_to_typec_cc(FIELD_GET(TCPC_CC_STATUS_CC1, status),
status & TCPC_CC_STATUS_TERM ||
tcpc_presenting_rd(role, CC1));
- cc2 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC2_SHIFT) &
- TCPC_CC_STATUS_CC2_MASK,
+ cc2 = tcpci_to_typec_cc(FIELD_GET(TCPC_CC_STATUS_CC2, status),
status & TCPC_CC_STATUS_TERM ||
tcpc_presenting_rd(role, CC2));
@@ -92,11 +92,9 @@
#define TCPC_CC_STATUS_TERM BIT(4)
#define TCPC_CC_STATUS_TERM_RP 0
#define TCPC_CC_STATUS_TERM_RD 1
+#define TCPC_CC_STATUS_CC2 GENMASK(3, 2)
+#define TCPC_CC_STATUS_CC1 GENMASK(1, 0)
#define TCPC_CC_STATE_SRC_OPEN 0
-#define TCPC_CC_STATUS_CC2_SHIFT 2
-#define TCPC_CC_STATUS_CC2_MASK 0x3
-#define TCPC_CC_STATUS_CC1_SHIFT 0
-#define TCPC_CC_STATUS_CC1_MASK 0x3
#define TCPC_POWER_STATUS 0x1e
#define TCPC_POWER_STATUS_DBG_ACC_CON BIT(7)
@@ -256,7 +254,7 @@ static inline enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink)
if (sink)
return TYPEC_CC_RP_3_0;
fallthrough;
- case 0x0:
+ case TCPC_CC_STATE_SRC_OPEN:
default:
return TYPEC_CC_OPEN;
}
The existing code here, particularly in maxim_contaminant.c, is arguably quite hard to read due to the open-coded masking and shifting spanning multiple lines. Use GENMASK() and FIELD_GET() instead, which arguably make the code much easier to follow. While at it, use the symbolic name TCPC_CC_STATE_SRC_OPEN for one instance of open-coded 0x0. Signed-off-by: André Draszik <andre.draszik@linaro.org> --- drivers/usb/typec/tcpm/maxim_contaminant.c | 8 +++----- drivers/usb/typec/tcpm/tcpci.c | 7 +++---- drivers/usb/typec/tcpm/tcpci_rt1711h.c | 7 +++---- include/linux/usb/tcpci.h | 8 +++----- 4 files changed, 12 insertions(+), 18 deletions(-)