diff mbox series

[PULL,28/29] hw/misc: In STM32L4x5 EXTI, correct configurable interrupts

Message ID 20240701160729.1910763-29-peter.maydell@linaro.org
State Not Applicable
Headers show
Series [PULL,01/29] hw/nvram: Add BCM2835 OTP device | expand

Commit Message

Peter Maydell July 1, 2024, 4:07 p.m. UTC
From: Inès Varhol <ines.varhol@telecom-paris.fr>

The implementation of configurable interrupts (interrupts supporting
edge selection) was incorrectly expecting alternating input levels :
this commits adds a new status field `irq_levels` to actually detect
edges.

Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629110800.539969-2-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/misc/stm32l4x5_exti.h |  2 ++
 hw/misc/stm32l4x5_exti.c         | 28 +++++++++++++---------------
 2 files changed, 15 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/include/hw/misc/stm32l4x5_exti.h b/include/hw/misc/stm32l4x5_exti.h
index be961d2f01f..55f763fa376 100644
--- a/include/hw/misc/stm32l4x5_exti.h
+++ b/include/hw/misc/stm32l4x5_exti.h
@@ -45,6 +45,8 @@  struct Stm32l4x5ExtiState {
     uint32_t swier[EXTI_NUM_REGISTER];
     uint32_t pr[EXTI_NUM_REGISTER];
 
+    /* used for edge detection */
+    uint32_t irq_levels[EXTI_NUM_REGISTER];
     qemu_irq irq[EXTI_NUM_INTERRUPT_OUT_LINES];
 };
 
diff --git a/hw/misc/stm32l4x5_exti.c b/hw/misc/stm32l4x5_exti.c
index 495a0004ab4..6a2ec62d785 100644
--- a/hw/misc/stm32l4x5_exti.c
+++ b/hw/misc/stm32l4x5_exti.c
@@ -88,6 +88,7 @@  static void stm32l4x5_exti_reset_hold(Object *obj, ResetType type)
         s->ftsr[bank] = 0x00000000;
         s->swier[bank] = 0x00000000;
         s->pr[bank] = 0x00000000;
+        s->irq_levels[bank] = 0x00000000;
     }
 }
 
@@ -102,27 +103,23 @@  static void stm32l4x5_exti_set_irq(void *opaque, int irq, int level)
     /* Shift the value to enable access in x2 registers. */
     irq %= EXTI_MAX_IRQ_PER_BANK;
 
+    if (level == extract32(s->irq_levels[bank], irq, 1)) {
+        /* No change in IRQ line state: do nothing */
+        return;
+    }
+    s->irq_levels[bank] = deposit32(s->irq_levels[bank], irq, 1, level);
+
     /* If the interrupt is masked, pr won't be raised */
     if (!extract32(s->imr[bank], irq, 1)) {
         return;
     }
 
-    if (((1 << irq) & s->rtsr[bank]) && level) {
-        /* Rising Edge */
-        s->pr[bank] |= 1 << irq;
-        qemu_irq_pulse(s->irq[oirq]);
-    } else if (((1 << irq) & s->ftsr[bank]) && !level) {
-        /* Falling Edge */
+    if ((level && extract32(s->rtsr[bank], irq, 1)) ||
+        (!level && extract32(s->ftsr[bank], irq, 1))) {
+
         s->pr[bank] |= 1 << irq;
         qemu_irq_pulse(s->irq[oirq]);
     }
-    /*
-     * In the following situations :
-     * - falling edge but rising trigger selected
-     * - rising edge but falling trigger selected
-     * - no trigger selected
-     * No action is required
-     */
 }
 
 static uint64_t stm32l4x5_exti_read(void *opaque, hwaddr addr,
@@ -255,8 +252,8 @@  static void stm32l4x5_exti_init(Object *obj)
 
 static const VMStateDescription vmstate_stm32l4x5_exti = {
     .name = TYPE_STM32L4X5_EXTI,
-    .version_id = 1,
-    .minimum_version_id = 1,
+    .version_id = 2,
+    .minimum_version_id = 2,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32_ARRAY(imr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
         VMSTATE_UINT32_ARRAY(emr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
@@ -264,6 +261,7 @@  static const VMStateDescription vmstate_stm32l4x5_exti = {
         VMSTATE_UINT32_ARRAY(ftsr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
         VMSTATE_UINT32_ARRAY(swier, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
         VMSTATE_UINT32_ARRAY(pr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
+        VMSTATE_UINT32_ARRAY(irq_levels, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
         VMSTATE_END_OF_LIST()
     }
 };