diff mbox series

[v5,2/6] dt-bindings: mfd: bd96801 PMIC core

Message ID 9fa3f30dede2b85871a89b20fe1eb13549418489.1719473802.git.mazziesaccount@gmail.com
State New
Headers show
Series Support ROHM BD96801 Scalable PMIC | expand

Commit Message

Matti Vaittinen June 27, 2024, 7:43 a.m. UTC
ROHM BD96801 is a highly configurable automotive grade PMIC. Introduce
DT bindings for the BD96801 core.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

---
Revision history:
v2 =>:
 - No changes

v1 => v2:
 - use lowercase node names in example
 - minor addition to ERRB use-cases

RFCv2 => v1
 - minor cleaning
 - add timeout-sec

RFCv1 => RFCv2:
  - Document rohm,hw-timeout-ms
  - Document rohm,wdg-action
---
 .../bindings/mfd/rohm,bd96801-pmic.yaml       | 173 ++++++++++++++++++
 1 file changed, 173 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
new file mode 100644
index 000000000000..d381125a0a15
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
@@ -0,0 +1,173 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd96801-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD96801 Scalable Power Management Integrated Circuit
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description:
+  BD96801 is an automotive grade single-chip power management IC.
+  It integrates 4 buck converters and 3 LDOs with safety features like
+  over-/under voltage and over current detection and a watchdog.
+
+properties:
+  compatible:
+    const: rohm,bd96801
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      The PMIC provides intb and errb IRQ lines. The errb IRQ line is used
+      for fatal IRQs which will cause the PMIC to shut down power outputs.
+      In many systems this will shut down the SoC contolling the PMIC and
+      connecting/handling the errb can be omitted. However, there are cases
+      where the SoC is not powered by the PMIC or has a short time backup
+      energy to handle shutdown of critical hardware. In that case it may be
+      useful to connect the errb and handle errb events.
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - enum: [intb, errb]
+      - const: errb
+
+  rohm,hw-timeout-ms:
+    description:
+      Watchdog timeout value(s). First walue is timeout limit. Second value is
+      optional value for 'too early' watchdog ping if window timeout mode is
+      to be used.
+    minItems: 1
+    maxItems: 2
+
+  rohm,wdg-action:
+    description:
+      Whether the watchdog failure must turn off the regulator power outputs or
+      just toggle the INTB line.
+    enum:
+      - prstb
+      - intb-only
+
+  timeout-sec:
+    maxItems: 2
+
+  regulators:
+    $ref: /schemas/regulator/rohm,bd96801-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@60 {
+            reg = <0x60>;
+            compatible = "rohm,bd96801";
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>, <6 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "intb", "errb";
+
+            regulators {
+                buck1 {
+                    regulator-name = "buck1";
+                    regulator-ramp-delay = <1250>;
+                    /* 0.5V min INITIAL - 150 mV tune */
+                    regulator-min-microvolt = <350000>;
+                    /* 3.3V + 150mV tune */
+                    regulator-max-microvolt = <3450000>;
+
+                    /* These can be set only when PMIC is in STBY */
+                    rohm,initial-voltage-microvolt = <500000>;
+                    regulator-ov-error-microvolt = <230000>;
+                    regulator-uv-error-microvolt = <230000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-warn-kelvin = <0>;
+                };
+                buck2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <350000>;
+                    regulator-max-microvolt = <3450000>;
+
+                    rohm,initial-voltage-microvolt = <3000000>;
+                    regulator-ov-error-microvolt = <18000>;
+                    regulator-uv-error-microvolt = <18000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-warn-kelvin = <1>;
+                };
+                buck3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <350000>;
+                    regulator-max-microvolt = <3450000>;
+
+                    rohm,initial-voltage-microvolt = <600000>;
+                    regulator-ov-warn-microvolt = <18000>;
+                    regulator-uv-warn-microvolt = <18000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-error-kelvin = <0>;
+                };
+                buck4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <350000>;
+                    regulator-max-microvolt = <3450000>;
+
+                    rohm,initial-voltage-microvolt = <600000>;
+                    regulator-ov-warn-microvolt = <18000>;
+                    regulator-uv-warn-microvolt = <18000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-error-kelvin = <0>;
+                };
+                ldo5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <3300000>;
+
+                    rohm,initial-voltage-microvolt = <500000>;
+                    regulator-ov-error-microvolt = <36000>;
+                    regulator-uv-error-microvolt = <34000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-warn-kelvin = <0>;
+                };
+                ldo6 {
+                    regulator-name = "ldo6";
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <3300000>;
+
+                    rohm,initial-voltage-microvolt = <300000>;
+                    regulator-ov-error-microvolt = <36000>;
+                    regulator-uv-error-microvolt = <34000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-warn-kelvin = <0>;
+                };
+                ldo7 {
+                    regulator-name = "ldo7";
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <3300000>;
+
+                    rohm,initial-voltage-microvolt = <500000>;
+                    regulator-ov-error-microvolt = <36000>;
+                    regulator-uv-error-microvolt = <34000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-warn-kelvin = <0>;
+                };
+            };
+        };
+    };