diff mbox series

[06/11] drm/vc4: hdmi: Handle error case of pm_runtime_resume_and_get

Message ID 20240630153652.318882-7-wahrenst@gmx.net
State Superseded
Headers show
Series ARM: bcm2835: Implement initial S2Idle for Raspberry Pi | expand

Commit Message

Stefan Wahren June 30, 2024, 3:36 p.m. UTC 
The commit 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is
powered in detect") introduced the necessary power management handling
to avoid register access while controller is powered down.
Unfortunately it just print a warning if pm_runtime_resume_and_get()
fails and proceed anyway.

This could happen during suspend to idle. So we must assume it is unsafe
to access the HDMI register. So bail out properly.

Fixes: 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is powered in detect")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--
2.34.1
diff mbox series

Patch

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index d57c4a5948c8..b3a42b709718 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -429,6 +429,7 @@  static int vc4_hdmi_connector_detect_ctx(struct drm_connector *connector,
 {
 	struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
 	enum drm_connector_status status = connector_status_disconnected;
+	int ret;

 	/*
 	 * NOTE: This function should really take vc4_hdmi->mutex, but
@@ -441,7 +442,11 @@  static int vc4_hdmi_connector_detect_ctx(struct drm_connector *connector,
 	 * the lock for now.
 	 */

-	WARN_ON(pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev));
+	ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
+	if (ret) {
+		DRM_ERROR("Failed to retain HDMI power domain: %d\n", ret);
+		return status;
+	}

 	if (vc4_hdmi->hpd_gpio) {
 		if (gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio))