new file mode 100644
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/atmel,at91rm9200-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip GPIO controller (PIO)
+
+maintainers:
+ - Manikandan Muralidharan <manikandan.m@microchip.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - atmel,at91sam9x5-gpio
+ - microchip,sam9x60-gpio
+ - const: atmel,at91rm9200-gpio
+ - items:
+ - enum:
+ - microchip,sam9x7-gpio
+ - const: microchip,sam9x60-gpio
+ - const: atmel,at91rm9200-gpio
+ - items:
+ - const: atmel,at91rm9200-gpio
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ gpio-controller: true
+ gpio-line-names: true
+
+ "#gpio-cells":
+ const: 2
+
+ clocks:
+ maxItems: 1
+
+ "#gpio-lines":
+ description:
+ Number of gpio, 32 by default if absent
+ maxItems: 1
+ default: 32
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+ - gpio-controller
+ - "#gpio-cells"
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/at91.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+ };
+...
deleted file mode 100644
@@ -1,31 +0,0 @@
-* Atmel GPIO controller (PIO)
-
-Required properties:
-- compatible: "atmel,<chip>-gpio", where <chip> is at91rm9200 or at91sam9x5.
-- reg: Should contain GPIO controller registers location and length
-- interrupts: Should be the port interrupt shared by all the pins.
-- #gpio-cells: Should be two. The first cell is the pin number and
- the second cell is used to specify optional parameters to declare if the GPIO
- is active high or low. See gpio.txt.
-- gpio-controller: Marks the device node as a GPIO controller.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two. The first cell is the pin number and the
- second cell is used to specify irq type flags, see the two cell description
- in interrupt-controller/interrupts.txt for details.
-
-optional properties:
-- #gpio-lines: Number of gpio if absent 32.
-
-
-Example:
- pioA: gpio@fffff200 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff200 0x100>;
- interrupts = <2 4>;
- #gpio-cells = <2>;
- gpio-controller;
- #gpio-lines = <19>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
Convert the Atmel GPIO controller binding document to DT schema format using json-schema. The compatible string "microchip,sam9x7-gpio" is added as well. Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> --- changes in v2: - Fix bot errors with 'make dt_binding_check', missed to add "atmel,at91rm9200-gpio" as separate compatible for devices that uses it - Remove label from example - Add default entry for #gpio-lines property - Add new compatible string details in commit message --- .../bindings/gpio/atmel,at91rm9200-gpio.yaml | 81 +++++++++++++++++++ .../devicetree/bindings/gpio/gpio_atmel.txt | 31 ------- 2 files changed, 81 insertions(+), 31 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/atmel,at91rm9200-gpio.yaml delete mode 100644 Documentation/devicetree/bindings/gpio/gpio_atmel.txt