@@ -115,6 +115,10 @@
/* RX FIFO occupancy indicator */
#define UART_OMAP_RX_LVL 0x19
+/* Timeout low and High */
+#define UART_OMAP_TO_L 0x26
+#define UART_OMAP_TO_H 0x27
+
/*
* Copy of the genpd flags for the console.
* Only used if console suspend is disabled
@@ -663,13 +667,25 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
/*
* On K3 SoCs, it is observed that RX TIMEOUT is signalled after
- * FIFO has been drained, in which case a dummy read of RX FIFO
- * is required to clear RX TIMEOUT condition.
+ * FIFO has been drained or erroneously.
+ * So apply solution of Errata i2310 as mentioned in
+ * https://www.ti.com/lit/pdf/sprz536
*/
if (priv->habit & UART_RX_TIMEOUT_QUIRK &&
(iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT &&
serial_port_in(port, UART_OMAP_RX_LVL) == 0) {
- serial_port_in(port, UART_RX);
+ unsigned char efr2, timeout_h, timeout_l;
+
+ efr2 = serial_in(up, UART_OMAP_EFR2);
+ timeout_h = serial_in(up, UART_OMAP_TO_H);
+ timeout_l = serial_in(up, UART_OMAP_TO_L);
+ serial_out(up, UART_OMAP_TO_H, 0xFF);
+ serial_out(up, UART_OMAP_TO_L, 0xFF);
+ serial_out(up, UART_OMAP_EFR2, UART_OMAP_EFR2_TIMEOUT_BEHAVE);
+ serial_in(up, UART_IIR);
+ serial_out(up, UART_OMAP_EFR2, efr2);
+ serial_out(up, UART_OMAP_TO_H, timeout_h);
+ serial_out(up, UART_OMAP_TO_L, timeout_l);
}
/* Stop processing interrupts on input overrun */
As per Errata i2310[0], Erroneous timeout can be triggered, if this Erroneous interrupt is not cleared then it may leads to storm of interrupts, therefore apply Errata i2310 solution. [0] https://www.ti.com/lit/pdf/sprz536 page 23 Fixes: b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs") Cc: stable@vger.kernel.org Signed-off-by: Udit Kumar <u-kumar1@ti.com> --- Test logs: https://gist.github.com/uditkumarti/48e239540db4e761861fbd1d7d31cfed Change logs Changes in v4: - Reverted fifo empty check before applying errata Link to v3: https://lore.kernel.org/all/20240619105903.165434-1-u-kumar1@ti.com/ Changes in v3: - CC stable in commit message Link to v2: https://lore.kernel.org/all/20240617052253.2188140-1-u-kumar1@ti.com/ Changes in v2: - Added Fixes Tag and typo correction in commit message - Corrected bit position to UART_OMAP_EFR2_TIMEOUT_BEHAVE Link to v1 https://lore.kernel.org/all/20240614061314.290840-1-u-kumar1@ti.com/ drivers/tty/serial/8250/8250_omap.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)