@@ -145,6 +145,20 @@ static inline void sas_fail_probe(struct domain_device *dev, const char *func, i
func, dev->parent ? "exp-attached" :
"direct-attached",
SAS_ADDR(dev->sas_addr), err);
+
+ /* if the device probe failed, the expander phy attached address
+ * need to be reset so that the phy will not be treated as flutter
+ * in the next revalidation
+ */
+ if (dev->parent && !dev_is_expander(dev->dev_type)) {
+ struct domain_device *parent = dev->parent;
+ struct expander_device *ex_dev = &parent->ex_dev;
+ struct sas_phy *phy = dev->phy;
+ struct ex_phy *ex_phy = &ex_dev->ex_phy[phy->number];
+
+ memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ }
+
sas_unregister_dev(dev->port, dev);
}
The expander phy will be treated as broadcast flutter in the next revalidation after the exp-attached end device probe failed, as follows: [78779.654026] sas: broadcast received: 0 [78779.654037] sas: REVALIDATING DOMAIN on port 0, pid:10 [78779.654680] sas: ex 500e004aaaaaaa1f phy05 change count has changed [78779.662977] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE) [78779.662986] sas: ex 500e004aaaaaaa1f phy05 new device attached [78779.663079] sas: ex 500e004aaaaaaa1f phy05:U:8 attached: 500e004aaaaaaa05 (stp) [78779.693542] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] found [78779.701155] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0 [78779.707864] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 ... [78835.161307] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [78835.171344] sas: sas_probe_sata: for exp-attached device 500e004aaaaaaa05 returned -19 [78835.180879] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] is gone [78835.187487] sas: broadcast received: 0 [78835.187504] sas: REVALIDATING DOMAIN on port 0, pid:10 [78835.188263] sas: ex 500e004aaaaaaa1f phy05 change count has changed [78835.195870] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE) [78835.195875] sas: ex 500e004aaaaaaa1f rediscovering phy05 [78835.196022] sas: ex 500e004aaaaaaa1f phy05:U:A attached: 500e004aaaaaaa05 (stp) [78835.196026] sas: ex 500e004aaaaaaa1f phy05 broadcast flutter [78835.197615] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0 The cause of the problem is that the related ex_phy's attached_sas_addr was not cleared after the end device probe failed, so reset it. Signed-off-by: Xingui Yang <yangxingui@huawei.com> --- Changes since v3: - Just manually clear the ex_phy's attached_sas_addr instead of calling sas_unregister_devs_sas_addr() and deleting the port. - Update commit information. Changes since v2: - Add a helper for calling sas_destruct_devices() and sas_destruct_ports(), and put the new call at the end of sas_probe_devices() based on John's suggestion. Changes since v1: - Simplify the process of getting ex_phy id based on Jason's suggestion. - Update commit information. --- drivers/scsi/libsas/sas_internal.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+)