diff mbox

[v3,1/5] mmc: dt-bindings: add ZTE ZX296718 MMC bindings

Message ID 1478179901-25645-2-git-send-email-jun.nie@linaro.org
State Superseded
Headers show

Commit Message

Jun Nie Nov. 3, 2016, 1:31 p.m. UTC
Document the device-tree binding of ZTE MMC host on
ZX296718 SoC.

Signed-off-by: Jun Nie <jun.nie@linaro.org>

---
 .../devicetree/bindings/mmc/zx-dw-mshc.txt         | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Jaehoon Chung Nov. 4, 2016, 10:24 a.m. UTC | #1
On 11/03/2016 10:31 PM, Jun Nie wrote:
> Document the device-tree binding of ZTE MMC host on

> ZX296718 SoC.

> 

> Signed-off-by: Jun Nie <jun.nie@linaro.org>

> ---

>  .../devicetree/bindings/mmc/zx-dw-mshc.txt         | 34 ++++++++++++++++++++++

>  1 file changed, 34 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt

> 

> diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt

> new file mode 100644

> index 0000000..5e1e16d

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt

> @@ -0,0 +1,34 @@

> +* ZTE specific extensions to the Synopsys Designware Mobile Storage

> +  Host Controller

> +

> +The Synopsys designware mobile storage host controller is used to interface

> +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents

> +differences between the core Synopsys dw mshc controller properties described

> +by synopsys-dw-mshc.txt and the properties used by the ZTE specific

> +extensions to the Synopsys Designware Mobile Storage Host Controller.

> +

> +Required Properties:

> +

> +* compatible: should be

> +	- "zte,zx296718-dw-mshc": for ZX SoCs

> +

> +Example:

> +

> +	mmc1: mmc@1110000 {

> +		compatible = "zte,zx296718-dw-mshc";

> +		#address-cells = <1>;

> +		#size-cells = <0>;

> +		reg = <0x01110000 0x1000>;

> +		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;

> +		fifo-depth = <32>;

> +		data-addr = <0x200>;

> +		fifo-watermark-aligned;

> +		bus-width = <4>;

> +		clock-frequency = <50000000>;

> +		clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;

> +		clock-names = "biu", "ciu";

> +		num-slots = <1>;

> +		max-frequency = <50000000>;

> +		cap-sdio-irq;

> +		cap-sd-highspeed;

> +		status = "disabled";


bracket is not pair?
Other things look good to me.

Best Regards,
Jaehoon Chung

> 


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
new file mode 100644
index 0000000..5e1e16d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
@@ -0,0 +1,34 @@ 
+* ZTE specific extensions to the Synopsys Designware Mobile Storage
+  Host Controller
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the ZTE specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+	- "zte,zx296718-dw-mshc": for ZX SoCs
+
+Example:
+
+	mmc1: mmc@1110000 {
+		compatible = "zte,zx296718-dw-mshc";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x01110000 0x1000>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		fifo-depth = <32>;
+		data-addr = <0x200>;
+		fifo-watermark-aligned;
+		bus-width = <4>;
+		clock-frequency = <50000000>;
+		clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
+		clock-names = "biu", "ciu";
+		num-slots = <1>;
+		max-frequency = <50000000>;
+		cap-sdio-irq;
+		cap-sd-highspeed;
+		status = "disabled";