@@ -408,7 +408,8 @@ static SIMPLE_DEV_PM_OPS(proc_thermal_pci_pm, proc_thermal_pci_suspend,
static const struct pci_device_id proc_thermal_pci_ids[] = {
{ PCI_DEVICE_DATA(INTEL, ADL_THERMAL, PROC_THERMAL_FEATURE_RAPL |
PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_WT_REQ) },
- { PCI_DEVICE_DATA(INTEL, LNLM_THERMAL, PROC_THERMAL_FEATURE_RAPL) },
+ { PCI_DEVICE_DATA(INTEL, LNLM_THERMAL, PROC_THERMAL_FEATURE_RAPL |
+ PROC_THERMAL_FEATURE_DLVR) },
{ PCI_DEVICE_DATA(INTEL, MTLP_THERMAL, PROC_THERMAL_FEATURE_RAPL |
PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_DLVR |
PROC_THERMAL_FEATURE_WT_HINT | PROC_THERMAL_FEATURE_POWER_FLOOR) },
@@ -68,6 +68,25 @@ static const struct mmio_reg dlvr_mmio_regs[] = {
{ 1, 0x15A10, 1, 0x1, 16}, /* dlvr_pll_busy */
};
+static const struct mmio_reg lnl_dlvr_mmio_regs[] = {
+ { 0, 0x5A08, 5, 0x1F, 0}, /* dlvr_spread_spectrum_pct */
+ { 0, 0x5A08, 1, 0x1, 5}, /* dlvr_control_mode */
+ { 0, 0x5A08, 1, 0x1, 6}, /* dlvr_control_lock */
+ { 0, 0x5A08, 1, 0x1, 7}, /* dlvr_rfim_enable */
+ { 0, 0x5A08, 2, 0x3, 8}, /* dlvr_freq_select */
+ { 1, 0x5A10, 2, 0x3, 30}, /* dlvr_hardware_rev */
+ { 1, 0x5A10, 2, 0x3, 0}, /* dlvr_freq_mhz */
+ { 1, 0x5A10, 1, 0x1, 23}, /* dlvr_pll_busy */
+};
+
+static const struct mapping_table lnl_dlvr_mapping[] = {
+ {"dlvr_freq_select", 0, "2227.2"},
+ {"dlvr_freq_select", 1, "2140"},
+ {"dlvr_freq_mhz", 0, "2227.2"},
+ {"dlvr_freq_mhz", 1, "2140"},
+ {NULL, 0, NULL},
+};
+
static int match_mapping_table(const struct mapping_table *table, const char *attr_name,
bool match_int_value, const u32 value, const char *value_str,
char **result_str, u32 *result_int)
@@ -167,7 +186,12 @@ static ssize_t suffix##_show(struct device *dev,\
mmio_regs = adl_dvfs_mmio_regs;\
} else if (table == 2) { \
match_strs = (const char **)dlvr_strings;\
- mmio_regs = dlvr_mmio_regs;\
+ if (pdev->device == PCI_DEVICE_ID_INTEL_LNLM_THERMAL) {\
+ mmio_regs = lnl_dlvr_mmio_regs;\
+ mapping = lnl_dlvr_mapping;\
+ } else {\
+ mmio_regs = dlvr_mmio_regs;\
+ } \
} else {\
match_strs = (const char **)fivr_strings;\
mmio_regs = tgl_fivr_mmio_regs;\
@@ -206,7 +230,12 @@ static ssize_t suffix##_store(struct device *dev,\
mmio_regs = adl_dvfs_mmio_regs;\
} else if (table == 2) { \
match_strs = (const char **)dlvr_strings;\
- mmio_regs = dlvr_mmio_regs;\
+ if (pdev->device == PCI_DEVICE_ID_INTEL_LNLM_THERMAL) {\
+ mmio_regs = lnl_dlvr_mmio_regs;\
+ mapping = lnl_dlvr_mapping;\
+ } else {\
+ mmio_regs = dlvr_mmio_regs;\
+ } \
} else {\
match_strs = (const char **)fivr_strings;\
mmio_regs = tgl_fivr_mmio_regs;\
Add support for DLVR (Digital Linear Voltage Regulator) for Lunar Lake. There are no new sysfs attributes or difference in operation compared to prior generations. MMIO offset and bit positions are changed compared to Meteor Lake processors. Also for two attributes dlvr_frequency_mhz and dlvr_frequency_select, the value presented or accepted by the firmware is not raw frequency value but an index. For example: RFI_FREQ_SELECT and RFI_FREQ : 0 DLVR freq point 2227.2 MHz : 1 DLVR freq point 2140 MHz Hence create a mapping table for Lunar Lake to map user space values to the firmware accepted values. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> --- .../processor_thermal_device_pci.c | 3 +- .../int340x_thermal/processor_thermal_rfim.c | 33 +++++++++++++++++-- 2 files changed, 33 insertions(+), 3 deletions(-)