diff mbox series

[v7,5/7] PCI: Add T_PERST_CLK_US macro

Message ID 20240102-j7200-pcie-s2r-v7-5-a2f9156da6c3@bootlin.com
State New
Headers show
Series Add suspend to ram support for PCIe on J7200 | expand

Commit Message

Thomas Richard June 19, 2024, 10:15 a.m. UTC
"Power Sequencing and Reset Signal Timings" table (section 2.9.2) in PCI
EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 5.1 indicates PERST#
should be deasserted after minimum of 100us once REFCLK is stable (symbol
T_PERST-CLK).

Add a macro so that PCIe controller drivers can use it.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
 drivers/pci/pci.h | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index fd44565c4756..1a11f2fe3efe 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -16,6 +16,9 @@ 
 /* Power stable to PERST# inactive from PCIe card Electromechanical Spec */
 #define PCIE_T_PVPERL_MS		100
 
+/* REFCLK stable before PERST# inactive from PCIe card Electromechanical Spec */
+#define PCIE_T_PERST_CLK_US		100
+
 /*
  * PCIe r6.0, sec 5.3.3.2.1 <PME Synchronization>
  * Recommends 1ms to 10ms timeout to check L2 ready.