diff mbox series

[5/8] iio: adc: axp20x_adc: add support for AXP717 ADC

Message ID 20240617220535.359021-6-macroalpha82@gmail.com
State New
Headers show
Series [1/8] dt-bindings: iio: adc: Add AXP717 compatible | expand

Commit Message

Chris Morgan June 17, 2024, 10:05 p.m. UTC
From: Chris Morgan <macromorgan@hotmail.com>

Add support for the AXP717 ADC. The AXP717 differs from other ADCs
in this series by utilizing a 14 bit ADC for all channels (a full 16
bits with the first 2 digits reserved). It also differs by lacking a
battery discharge current channel.

Note that while the current charge channel itself is included in this
driver for the AXP717 and listed in the datasheet, no scale or offset
was given for this channel. For now no scale or offset is provided in
this driver.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/iio/adc/axp20x_adc.c | 167 +++++++++++++++++++++++++++++++++--
 1 file changed, 160 insertions(+), 7 deletions(-)

Comments

Chen-Yu Tsai June 23, 2024, 5:27 a.m. UTC | #1
On Mon, Jun 17, 2024 at 05:05:32PM -0500, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the AXP717 ADC. The AXP717 differs from other ADCs
> in this series by utilizing a 14 bit ADC for all channels (a full 16
> bits with the first 2 digits reserved). It also differs by lacking a
> battery discharge current channel.

Maybe charge and discharge share the same channel?

> Note that while the current charge channel itself is included in this
> driver for the AXP717 and listed in the datasheet, no scale or offset
> was given for this channel. For now no scale or offset is provided in
> this driver.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
>  drivers/iio/adc/axp20x_adc.c | 167 +++++++++++++++++++++++++++++++++--
>  1 file changed, 160 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
> index d6c51b0f48e3..f35ba2c11e1b 100644
> --- a/drivers/iio/adc/axp20x_adc.c
> +++ b/drivers/iio/adc/axp20x_adc.c
> @@ -5,6 +5,7 @@
>   *	Quentin Schulz <quentin.schulz@free-electrons.com>
>   */
>  
> +#include <asm/unaligned.h>
>  #include <linux/bitfield.h>
>  #include <linux/completion.h>
>  #include <linux/interrupt.h>
> @@ -27,6 +28,8 @@
>  
>  #define AXP22X_ADC_EN1_MASK			(GENMASK(7, 5) | BIT(0))
>  
> +#define AXP717_ADC_EN1_MASK			GENMASK(5, 0)
> +
>  #define AXP20X_GPIO10_IN_RANGE_GPIO0		BIT(0)
>  #define AXP20X_GPIO10_IN_RANGE_GPIO1		BIT(1)
>  
> @@ -35,6 +38,11 @@
>  
>  #define AXP22X_ADC_RATE_HZ(x)			((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK)
>  
> +#define AXP717_ADC_DATA_TS			0x00
> +#define AXP717_ADC_DATA_TEMP			0x01
> +
> +#define AXP717_ADC_DATA_MASK			0x3fff
> +
>  #define AXP813_V_I_ADC_RATE_MASK		GENMASK(5, 4)
>  #define AXP813_ADC_RATE_MASK			(AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
>  #define AXP813_TS_GPIO0_ADC_RATE_HZ(x)		AXP20X_ADC_RATE_HZ(x)
> @@ -98,6 +106,18 @@ enum axp22x_adc_channel_i {
>  	AXP22X_BATT_DISCHRG_I,
>  };
>  
> +enum axp717_adc_channel_v {
> +	AXP717_BATT_V = 0,
> +	AXP717_TS_IN,
> +	AXP717_VBUS_V,
> +	AXP717_VSYS_V,
> +	AXP717_DIE_TEMP_V,

Please also add VMID and backup battery voltage.

> +};
> +
> +enum axp717_adc_channel_i {
> +	AXP717_BATT_CHRG_I = 5,
> +};
> +
>  enum axp813_adc_channel_v {
>  	AXP813_TS_IN = 0,
>  	AXP813_GPIO0_V,
> @@ -152,6 +172,22 @@ static struct iio_map axp22x_maps[] = {
>  	}, { /* sentinel */ }
>  };
>  
> +static struct iio_map axp717_maps[] = {
> +	{
> +		.consumer_dev_name = "axp20x-usb-power-supply",
> +		.consumer_channel = "vbus_v",
> +		.adc_channel_label = "vbus_v",
> +	}, {
> +		.consumer_dev_name = "axp20x-battery-power-supply",
> +		.consumer_channel = "batt_v",
> +		.adc_channel_label = "batt_v",
> +	}, {
> +		.consumer_dev_name = "axp20x-battery-power-supply",
> +		.consumer_channel = "batt_chrg_i",
> +		.adc_channel_label = "batt_chrg_i",
> +	},
> +};
> +
>  /*
>   * Channels are mapped by physical system. Their channels share the same index.
>   * i.e. acin_i is in_current0_raw and acin_v is in_voltage0_raw.
> @@ -210,6 +246,25 @@ static const struct iio_chan_spec axp22x_adc_channels[] = {
>  			   AXP22X_TS_ADC_H),
>  };
>  
> +/*
> + * Scale and offset is unknown for temp, ts, and batt_chrg_i channels
> + * for now. Leaving scale and offset undefined for now.
> + */
> +static const struct iio_chan_spec axp717_adc_channels[] = {
> +	AXP20X_ADC_CHANNEL(AXP717_BATT_V, "batt_v", IIO_VOLTAGE,
> +			   AXP717_BATT_V_H),
> +	AXP20X_ADC_CHANNEL(AXP717_TS_IN, "ts_v", IIO_VOLTAGE,
> +			   AXP717_ADC_DATA_H),
> +	AXP20X_ADC_CHANNEL(AXP717_VBUS_V, "vbus_v", IIO_VOLTAGE,
> +			   AXP717_VBUS_V_H),
> +	AXP20X_ADC_CHANNEL(AXP717_VSYS_V, "vsys_v", IIO_VOLTAGE,
> +			   AXP717_VSYS_V_H),
> +	AXP20X_ADC_CHANNEL(AXP717_DIE_TEMP_V, "pmic_temp", IIO_TEMP,
> +				  AXP717_ADC_DATA_H),
> +	AXP20X_ADC_CHANNEL(AXP717_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT,
> +			   AXP717_BATT_CHRG_I_H),
> +};
> +
>  static const struct iio_chan_spec axp813_adc_channels[] = {
>  	{
>  		.type = IIO_TEMP,
> @@ -269,6 +324,44 @@ static int axp22x_adc_raw(struct iio_dev *indio_dev,
>  	return IIO_VAL_INT;
>  }
>  
> +static int axp717_adc_raw(struct iio_dev *indio_dev,
> +			  struct iio_chan_spec const *chan, int *val)
> +{
> +	struct axp20x_adc_iio *info = iio_priv(indio_dev);
> +	u8 bulk_reg[2];
> +	int ret;
> +
> +	/*
> +	 * A generic "ADC data" channel is used for TS, tdie, vmid,
> +	 * and vbackup. This channel must both first be enabled and
> +	 * also selected before it can be read.
> +	 */
> +	switch (chan->channel) {
> +	case AXP717_TS_IN:
> +		regmap_write(info->regmap, AXP717_ADC_DATA_SEL,
> +			     AXP717_ADC_DATA_TS);
> +		break;
> +	case AXP717_DIE_TEMP_V:
> +		regmap_write(info->regmap, AXP717_ADC_DATA_SEL,
> +			     AXP717_ADC_DATA_TEMP);
> +		break;
> +
> +	default:
> +		break;
> +	}
> +
> +	/*
> +	 * All channels are 14 bits, with the first 2 bits on the high
> +	 * register reserved and the remaining bits as the ADC value.
> +	 */
> +	ret = regmap_bulk_read(info->regmap, chan->address, bulk_reg, 2);
> +	if (ret < 0)
> +		return ret;
> +
> +	*val = get_unaligned_be16(bulk_reg) & AXP717_ADC_DATA_MASK;
> +	return IIO_VAL_INT;
> +}
> +
>  static int axp813_adc_raw(struct iio_dev *indio_dev,
>  			  struct iio_chan_spec const *chan, int *val)
>  {
> @@ -425,6 +518,27 @@ static int axp22x_adc_scale(struct iio_chan_spec const *chan, int *val,
>  	}
>  }
>  
> +static int axp717_adc_scale(struct iio_chan_spec const *chan, int *val,
> +			    int *val2)
> +{
> +	switch (chan->type) {
> +	case IIO_VOLTAGE:
> +		*val = 1;
> +		return IIO_VAL_INT;
> +
> +	case IIO_CURRENT:
> +		*val = 1;
> +		return IIO_VAL_INT;
> +
> +	case IIO_TEMP:
> +		*val = 100;
> +		return IIO_VAL_INT;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
>  static int axp813_adc_scale(struct iio_chan_spec const *chan, int *val,
>  			    int *val2)
>  {
> @@ -529,6 +643,22 @@ static int axp22x_read_raw(struct iio_dev *indio_dev,
>  	}
>  }
>  
> +static int axp717_read_raw(struct iio_dev *indio_dev,
> +			   struct iio_chan_spec const *chan, int *val,
> +			   int *val2, long mask)
> +{
> +	switch (mask) {
> +	case IIO_CHAN_INFO_SCALE:
> +		return axp717_adc_scale(chan, val, val2);
> +
> +	case IIO_CHAN_INFO_RAW:
> +		return axp717_adc_raw(indio_dev, chan, val);
> +
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
>  static int axp813_read_raw(struct iio_dev *indio_dev,
>  			   struct iio_chan_spec const *chan, int *val,
>  			   int *val2, long mask)
> @@ -593,6 +723,10 @@ static const struct iio_info axp22x_adc_iio_info = {
>  	.read_raw = axp22x_read_raw,
>  };
>  
> +static const struct iio_info axp717_adc_iio_info = {
> +	.read_raw = axp717_read_raw,
> +};
> +
>  static const struct iio_info axp813_adc_iio_info = {
>  	.read_raw = axp813_read_raw,
>  };
> @@ -622,7 +756,9 @@ struct axp_data {
>  	const struct iio_info		*iio_info;
>  	int				num_channels;
>  	struct iio_chan_spec const	*channels;
> +	unsigned long			adc_en1;
>  	unsigned long			adc_en1_mask;
> +	unsigned long			adc_en2;
>  	unsigned long			adc_en2_mask;
>  	int				(*adc_rate)(struct axp20x_adc_iio *info,
>  						    int rate);
> @@ -633,7 +769,9 @@ static const struct axp_data axp20x_data = {
>  	.iio_info = &axp20x_adc_iio_info,
>  	.num_channels = ARRAY_SIZE(axp20x_adc_channels),
>  	.channels = axp20x_adc_channels,
> +	.adc_en1 = AXP20X_ADC_EN1,
>  	.adc_en1_mask = AXP20X_ADC_EN1_MASK,
> +	.adc_en2 = AXP20X_ADC_EN2,
>  	.adc_en2_mask = AXP20X_ADC_EN2_MASK,
>  	.adc_rate = axp20x_adc_rate,
>  	.maps = axp20x_maps,
> @@ -643,15 +781,26 @@ static const struct axp_data axp22x_data = {
>  	.iio_info = &axp22x_adc_iio_info,
>  	.num_channels = ARRAY_SIZE(axp22x_adc_channels),
>  	.channels = axp22x_adc_channels,
> +	.adc_en1 = AXP20X_ADC_EN1,
>  	.adc_en1_mask = AXP22X_ADC_EN1_MASK,
>  	.adc_rate = axp22x_adc_rate,
>  	.maps = axp22x_maps,
>  };

Please split out the changes generalizing the driver into a separate
patch. That makes it easier to follow.


ChenYu

> +static const struct axp_data axp717_data = {
> +	.iio_info = &axp717_adc_iio_info,
> +	.num_channels = ARRAY_SIZE(axp717_adc_channels),
> +	.channels = axp717_adc_channels,
> +	.adc_en1 = AXP717_ADC_CH_EN_CONTROL,
> +	.adc_en1_mask = AXP717_ADC_EN1_MASK,
> +	.maps = axp717_maps,
> +};
> +
>  static const struct axp_data axp813_data = {
>  	.iio_info = &axp813_adc_iio_info,
>  	.num_channels = ARRAY_SIZE(axp813_adc_channels),
>  	.channels = axp813_adc_channels,
> +	.adc_en1 = AXP20X_ADC_EN1,
>  	.adc_en1_mask = AXP22X_ADC_EN1_MASK,
>  	.adc_rate = axp813_adc_rate,
>  	.maps = axp22x_maps,
> @@ -660,6 +809,7 @@ static const struct axp_data axp813_data = {
>  static const struct of_device_id axp20x_adc_of_match[] = {
>  	{ .compatible = "x-powers,axp209-adc", .data = (void *)&axp20x_data, },
>  	{ .compatible = "x-powers,axp221-adc", .data = (void *)&axp22x_data, },
> +	{ .compatible = "x-powers,axp717-adc", .data = (void *)&axp717_data, },
>  	{ .compatible = "x-powers,axp813-adc", .data = (void *)&axp813_data, },
>  	{ /* sentinel */ }
>  };
> @@ -668,6 +818,7 @@ MODULE_DEVICE_TABLE(of, axp20x_adc_of_match);
>  static const struct platform_device_id axp20x_adc_id_match[] = {
>  	{ .name = "axp20x-adc", .driver_data = (kernel_ulong_t)&axp20x_data, },
>  	{ .name = "axp22x-adc", .driver_data = (kernel_ulong_t)&axp22x_data, },
> +	{ .name = "axp717-adc", .driver_data = (kernel_ulong_t)&axp717_data, },
>  	{ .name = "axp813-adc", .driver_data = (kernel_ulong_t)&axp813_data, },
>  	{ /* sentinel */ },
>  };
> @@ -709,15 +860,17 @@ static int axp20x_probe(struct platform_device *pdev)
>  	indio_dev->channels = info->data->channels;
>  
>  	/* Enable the ADCs on IP */
> -	regmap_write(info->regmap, AXP20X_ADC_EN1, info->data->adc_en1_mask);
> +	regmap_write(info->regmap, info->data->adc_en1,
> +		     info->data->adc_en1_mask);
>  
>  	if (info->data->adc_en2_mask)
> -		regmap_update_bits(info->regmap, AXP20X_ADC_EN2,
> +		regmap_update_bits(info->regmap, info->data->adc_en2,
>  				   info->data->adc_en2_mask,
>  				   info->data->adc_en2_mask);
>  
>  	/* Configure ADCs rate */
> -	info->data->adc_rate(info, 100);
> +	if (info->data->adc_rate)
> +		info->data->adc_rate(info, 100);
>  
>  	ret = iio_map_array_register(indio_dev, info->data->maps);
>  	if (ret < 0) {
> @@ -737,10 +890,10 @@ static int axp20x_probe(struct platform_device *pdev)
>  	iio_map_array_unregister(indio_dev);
>  
>  fail_map:
> -	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
> +	regmap_write(info->regmap, info->data->adc_en1, 0);
>  
>  	if (info->data->adc_en2_mask)
> -		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
> +		regmap_write(info->regmap, info->data->adc_en2, 0);
>  
>  	return ret;
>  }
> @@ -753,10 +906,10 @@ static void axp20x_remove(struct platform_device *pdev)
>  	iio_device_unregister(indio_dev);
>  	iio_map_array_unregister(indio_dev);
>  
> -	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
> +	regmap_write(info->regmap, info->data->adc_en1, 0);
>  
>  	if (info->data->adc_en2_mask)
> -		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
> +		regmap_write(info->regmap, info->data->adc_en2, 0);
>  }
>  
>  static struct platform_driver axp20x_adc_driver = {
> -- 
> 2.34.1
>
Jonathan Cameron June 23, 2024, 4:30 p.m. UTC | #2
On Mon, 17 Jun 2024 17:05:32 -0500
Chris Morgan <macroalpha82@gmail.com> wrote:

> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the AXP717 ADC. The AXP717 differs from other ADCs
> in this series by utilizing a 14 bit ADC for all channels (a full 16
> bits with the first 2 digits reserved). It also differs by lacking a
> battery discharge current channel.
> 
> Note that while the current charge channel itself is included in this
> driver for the AXP717 and listed in the datasheet, no scale or offset
> was given for this channel. For now no scale or offset is provided in
> this driver.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Hi Chris

A few minor comments inline,

Thanks,

Jonathan

> ---
>  drivers/iio/adc/axp20x_adc.c | 167 +++++++++++++++++++++++++++++++++--
>  1 file changed, 160 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
> index d6c51b0f48e3..f35ba2c11e1b 100644
> --- a/drivers/iio/adc/axp20x_adc.c
> +++ b/drivers/iio/adc/axp20x_adc.c
> @@ -5,6 +5,7 @@
>   *	Quentin Schulz <quentin.schulz@free-electrons.com>
>   */
>  
> +#include <asm/unaligned.h>
>  #include <linux/bitfield.h>
>  #include <linux/completion.h>
>  #include <linux/interrupt.h>
> @@ -27,6 +28,8 @@
>  
>  #define AXP22X_ADC_EN1_MASK			(GENMASK(7, 5) | BIT(0))
>  
> +#define AXP717_ADC_EN1_MASK			GENMASK(5, 0)
> +
>  #define AXP20X_GPIO10_IN_RANGE_GPIO0		BIT(0)
>  #define AXP20X_GPIO10_IN_RANGE_GPIO1		BIT(1)
>  
> @@ -35,6 +38,11 @@
>  
>  #define AXP22X_ADC_RATE_HZ(x)			((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK)
>  
> +#define AXP717_ADC_DATA_TS			0x00
> +#define AXP717_ADC_DATA_TEMP			0x01
> +
> +#define AXP717_ADC_DATA_MASK			0x3fff

GENMASK()

> +static int axp717_adc_raw(struct iio_dev *indio_dev,
> +			  struct iio_chan_spec const *chan, int *val)
> +{
> +	struct axp20x_adc_iio *info = iio_priv(indio_dev);
> +	u8 bulk_reg[2];
> +	int ret;
> +
> +	/*
> +	 * A generic "ADC data" channel is used for TS, tdie, vmid,
> +	 * and vbackup. This channel must both first be enabled and
> +	 * also selected before it can be read.
> +	 */
> +	switch (chan->channel) {
> +	case AXP717_TS_IN:
> +		regmap_write(info->regmap, AXP717_ADC_DATA_SEL,
> +			     AXP717_ADC_DATA_TS);
> +		break;
> +	case AXP717_DIE_TEMP_V:
> +		regmap_write(info->regmap, AXP717_ADC_DATA_SEL,
> +			     AXP717_ADC_DATA_TEMP);
> +		break;
> +
> +	default:
> +		break;
> +	}
> +
> +	/*
> +	 * All channels are 14 bits, with the first 2 bits on the high
> +	 * register reserved and the remaining bits as the ADC value.
> +	 */
> +	ret = regmap_bulk_read(info->regmap, chan->address, bulk_reg, 2);
> +	if (ret < 0)
> +		return ret;
> +
> +	*val = get_unaligned_be16(bulk_reg) & AXP717_ADC_DATA_MASK;

FIELD_GET() preferred as then I don't have to check if DATA_MASK includes
the 0th bit.

> +	return IIO_VAL_INT;
> +}
> +
Chris Morgan July 30, 2024, 7:11 p.m. UTC | #3
On Sun, Jun 23, 2024 at 01:27:25PM +0800, Chen-Yu Tsai wrote:
> On Mon, Jun 17, 2024 at 05:05:32PM -0500, Chris Morgan wrote:
> > From: Chris Morgan <macromorgan@hotmail.com>
> > 
> > Add support for the AXP717 ADC. The AXP717 differs from other ADCs
> > in this series by utilizing a 14 bit ADC for all channels (a full 16
> > bits with the first 2 digits reserved). It also differs by lacking a
> > battery discharge current channel.
> 
> Maybe charge and discharge share the same channel?

I can't confirm that. I've enabled multiple power draws and don't
notice a change on this channel consistent with such a draw. Power
draws include backlight, GPIO vibrators, and turning on/off regulators.

> 
> > Note that while the current charge channel itself is included in this
> > driver for the AXP717 and listed in the datasheet, no scale or offset
> > was given for this channel. For now no scale or offset is provided in
> > this driver.
> > 
> > Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> > ---
> >  drivers/iio/adc/axp20x_adc.c | 167 +++++++++++++++++++++++++++++++++--
> >  1 file changed, 160 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
> > index d6c51b0f48e3..f35ba2c11e1b 100644
> > --- a/drivers/iio/adc/axp20x_adc.c
> > +++ b/drivers/iio/adc/axp20x_adc.c
> > @@ -5,6 +5,7 @@
> >   *	Quentin Schulz <quentin.schulz@free-electrons.com>
> >   */
> >  
> > +#include <asm/unaligned.h>
> >  #include <linux/bitfield.h>
> >  #include <linux/completion.h>
> >  #include <linux/interrupt.h>
> > @@ -27,6 +28,8 @@
> >  
> >  #define AXP22X_ADC_EN1_MASK			(GENMASK(7, 5) | BIT(0))
> >  
> > +#define AXP717_ADC_EN1_MASK			GENMASK(5, 0)
> > +
> >  #define AXP20X_GPIO10_IN_RANGE_GPIO0		BIT(0)
> >  #define AXP20X_GPIO10_IN_RANGE_GPIO1		BIT(1)
> >  
> > @@ -35,6 +38,11 @@
> >  
> >  #define AXP22X_ADC_RATE_HZ(x)			((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK)
> >  
> > +#define AXP717_ADC_DATA_TS			0x00
> > +#define AXP717_ADC_DATA_TEMP			0x01
> > +
> > +#define AXP717_ADC_DATA_MASK			0x3fff
> > +
> >  #define AXP813_V_I_ADC_RATE_MASK		GENMASK(5, 4)
> >  #define AXP813_ADC_RATE_MASK			(AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
> >  #define AXP813_TS_GPIO0_ADC_RATE_HZ(x)		AXP20X_ADC_RATE_HZ(x)
> > @@ -98,6 +106,18 @@ enum axp22x_adc_channel_i {
> >  	AXP22X_BATT_DISCHRG_I,
> >  };
> >  
> > +enum axp717_adc_channel_v {
> > +	AXP717_BATT_V = 0,
> > +	AXP717_TS_IN,
> > +	AXP717_VBUS_V,
> > +	AXP717_VSYS_V,
> > +	AXP717_DIE_TEMP_V,
> 
> Please also add VMID and backup battery voltage.

Will do, I'll make sure all ADC channels are here, even if they aren't
used.

> 
> > +};
> > +
> > +enum axp717_adc_channel_i {
> > +	AXP717_BATT_CHRG_I = 5,
> > +};
> > +
> >  enum axp813_adc_channel_v {
> >  	AXP813_TS_IN = 0,
> >  	AXP813_GPIO0_V,
> > @@ -152,6 +172,22 @@ static struct iio_map axp22x_maps[] = {
> >  	}, { /* sentinel */ }
> >  };
> >  
> > +static struct iio_map axp717_maps[] = {
> > +	{
> > +		.consumer_dev_name = "axp20x-usb-power-supply",
> > +		.consumer_channel = "vbus_v",
> > +		.adc_channel_label = "vbus_v",
> > +	}, {
> > +		.consumer_dev_name = "axp20x-battery-power-supply",
> > +		.consumer_channel = "batt_v",
> > +		.adc_channel_label = "batt_v",
> > +	}, {
> > +		.consumer_dev_name = "axp20x-battery-power-supply",
> > +		.consumer_channel = "batt_chrg_i",
> > +		.adc_channel_label = "batt_chrg_i",
> > +	},
> > +};
> > +
> >  /*
> >   * Channels are mapped by physical system. Their channels share the same index.
> >   * i.e. acin_i is in_current0_raw and acin_v is in_voltage0_raw.
> > @@ -210,6 +246,25 @@ static const struct iio_chan_spec axp22x_adc_channels[] = {
> >  			   AXP22X_TS_ADC_H),
> >  };
> >  
> > +/*
> > + * Scale and offset is unknown for temp, ts, and batt_chrg_i channels
> > + * for now. Leaving scale and offset undefined for now.
> > + */
> > +static const struct iio_chan_spec axp717_adc_channels[] = {
> > +	AXP20X_ADC_CHANNEL(AXP717_BATT_V, "batt_v", IIO_VOLTAGE,
> > +			   AXP717_BATT_V_H),
> > +	AXP20X_ADC_CHANNEL(AXP717_TS_IN, "ts_v", IIO_VOLTAGE,
> > +			   AXP717_ADC_DATA_H),
> > +	AXP20X_ADC_CHANNEL(AXP717_VBUS_V, "vbus_v", IIO_VOLTAGE,
> > +			   AXP717_VBUS_V_H),
> > +	AXP20X_ADC_CHANNEL(AXP717_VSYS_V, "vsys_v", IIO_VOLTAGE,
> > +			   AXP717_VSYS_V_H),
> > +	AXP20X_ADC_CHANNEL(AXP717_DIE_TEMP_V, "pmic_temp", IIO_TEMP,
> > +				  AXP717_ADC_DATA_H),
> > +	AXP20X_ADC_CHANNEL(AXP717_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT,
> > +			   AXP717_BATT_CHRG_I_H),
> > +};
> > +
> >  static const struct iio_chan_spec axp813_adc_channels[] = {
> >  	{
> >  		.type = IIO_TEMP,
> > @@ -269,6 +324,44 @@ static int axp22x_adc_raw(struct iio_dev *indio_dev,
> >  	return IIO_VAL_INT;
> >  }
> >  
> > +static int axp717_adc_raw(struct iio_dev *indio_dev,
> > +			  struct iio_chan_spec const *chan, int *val)
> > +{
> > +	struct axp20x_adc_iio *info = iio_priv(indio_dev);
> > +	u8 bulk_reg[2];
> > +	int ret;
> > +
> > +	/*
> > +	 * A generic "ADC data" channel is used for TS, tdie, vmid,
> > +	 * and vbackup. This channel must both first be enabled and
> > +	 * also selected before it can be read.
> > +	 */
> > +	switch (chan->channel) {
> > +	case AXP717_TS_IN:
> > +		regmap_write(info->regmap, AXP717_ADC_DATA_SEL,
> > +			     AXP717_ADC_DATA_TS);
> > +		break;
> > +	case AXP717_DIE_TEMP_V:
> > +		regmap_write(info->regmap, AXP717_ADC_DATA_SEL,
> > +			     AXP717_ADC_DATA_TEMP);
> > +		break;
> > +
> > +	default:
> > +		break;
> > +	}
> > +
> > +	/*
> > +	 * All channels are 14 bits, with the first 2 bits on the high
> > +	 * register reserved and the remaining bits as the ADC value.
> > +	 */
> > +	ret = regmap_bulk_read(info->regmap, chan->address, bulk_reg, 2);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	*val = get_unaligned_be16(bulk_reg) & AXP717_ADC_DATA_MASK;
> > +	return IIO_VAL_INT;
> > +}
> > +
> >  static int axp813_adc_raw(struct iio_dev *indio_dev,
> >  			  struct iio_chan_spec const *chan, int *val)
> >  {
> > @@ -425,6 +518,27 @@ static int axp22x_adc_scale(struct iio_chan_spec const *chan, int *val,
> >  	}
> >  }
> >  
> > +static int axp717_adc_scale(struct iio_chan_spec const *chan, int *val,
> > +			    int *val2)
> > +{
> > +	switch (chan->type) {
> > +	case IIO_VOLTAGE:
> > +		*val = 1;
> > +		return IIO_VAL_INT;
> > +
> > +	case IIO_CURRENT:
> > +		*val = 1;
> > +		return IIO_VAL_INT;
> > +
> > +	case IIO_TEMP:
> > +		*val = 100;
> > +		return IIO_VAL_INT;
> > +
> > +	default:
> > +		return -EINVAL;
> > +	}
> > +}
> > +
> >  static int axp813_adc_scale(struct iio_chan_spec const *chan, int *val,
> >  			    int *val2)
> >  {
> > @@ -529,6 +643,22 @@ static int axp22x_read_raw(struct iio_dev *indio_dev,
> >  	}
> >  }
> >  
> > +static int axp717_read_raw(struct iio_dev *indio_dev,
> > +			   struct iio_chan_spec const *chan, int *val,
> > +			   int *val2, long mask)
> > +{
> > +	switch (mask) {
> > +	case IIO_CHAN_INFO_SCALE:
> > +		return axp717_adc_scale(chan, val, val2);
> > +
> > +	case IIO_CHAN_INFO_RAW:
> > +		return axp717_adc_raw(indio_dev, chan, val);
> > +
> > +	default:
> > +		return -EINVAL;
> > +	}
> > +}
> > +
> >  static int axp813_read_raw(struct iio_dev *indio_dev,
> >  			   struct iio_chan_spec const *chan, int *val,
> >  			   int *val2, long mask)
> > @@ -593,6 +723,10 @@ static const struct iio_info axp22x_adc_iio_info = {
> >  	.read_raw = axp22x_read_raw,
> >  };
> >  
> > +static const struct iio_info axp717_adc_iio_info = {
> > +	.read_raw = axp717_read_raw,
> > +};
> > +
> >  static const struct iio_info axp813_adc_iio_info = {
> >  	.read_raw = axp813_read_raw,
> >  };
> > @@ -622,7 +756,9 @@ struct axp_data {
> >  	const struct iio_info		*iio_info;
> >  	int				num_channels;
> >  	struct iio_chan_spec const	*channels;
> > +	unsigned long			adc_en1;
> >  	unsigned long			adc_en1_mask;
> > +	unsigned long			adc_en2;
> >  	unsigned long			adc_en2_mask;
> >  	int				(*adc_rate)(struct axp20x_adc_iio *info,
> >  						    int rate);
> > @@ -633,7 +769,9 @@ static const struct axp_data axp20x_data = {
> >  	.iio_info = &axp20x_adc_iio_info,
> >  	.num_channels = ARRAY_SIZE(axp20x_adc_channels),
> >  	.channels = axp20x_adc_channels,
> > +	.adc_en1 = AXP20X_ADC_EN1,
> >  	.adc_en1_mask = AXP20X_ADC_EN1_MASK,
> > +	.adc_en2 = AXP20X_ADC_EN2,
> >  	.adc_en2_mask = AXP20X_ADC_EN2_MASK,
> >  	.adc_rate = axp20x_adc_rate,
> >  	.maps = axp20x_maps,
> > @@ -643,15 +781,26 @@ static const struct axp_data axp22x_data = {
> >  	.iio_info = &axp22x_adc_iio_info,
> >  	.num_channels = ARRAY_SIZE(axp22x_adc_channels),
> >  	.channels = axp22x_adc_channels,
> > +	.adc_en1 = AXP20X_ADC_EN1,
> >  	.adc_en1_mask = AXP22X_ADC_EN1_MASK,
> >  	.adc_rate = axp22x_adc_rate,
> >  	.maps = axp22x_maps,
> >  };
> 
> Please split out the changes generalizing the driver into a separate
> patch. That makes it easier to follow.
> 

Acknowledged.

> 
> ChenYu
> 
> > +static const struct axp_data axp717_data = {
> > +	.iio_info = &axp717_adc_iio_info,
> > +	.num_channels = ARRAY_SIZE(axp717_adc_channels),
> > +	.channels = axp717_adc_channels,
> > +	.adc_en1 = AXP717_ADC_CH_EN_CONTROL,
> > +	.adc_en1_mask = AXP717_ADC_EN1_MASK,
> > +	.maps = axp717_maps,
> > +};
> > +
> >  static const struct axp_data axp813_data = {
> >  	.iio_info = &axp813_adc_iio_info,
> >  	.num_channels = ARRAY_SIZE(axp813_adc_channels),
> >  	.channels = axp813_adc_channels,
> > +	.adc_en1 = AXP20X_ADC_EN1,
> >  	.adc_en1_mask = AXP22X_ADC_EN1_MASK,
> >  	.adc_rate = axp813_adc_rate,
> >  	.maps = axp22x_maps,
> > @@ -660,6 +809,7 @@ static const struct axp_data axp813_data = {
> >  static const struct of_device_id axp20x_adc_of_match[] = {
> >  	{ .compatible = "x-powers,axp209-adc", .data = (void *)&axp20x_data, },
> >  	{ .compatible = "x-powers,axp221-adc", .data = (void *)&axp22x_data, },
> > +	{ .compatible = "x-powers,axp717-adc", .data = (void *)&axp717_data, },
> >  	{ .compatible = "x-powers,axp813-adc", .data = (void *)&axp813_data, },
> >  	{ /* sentinel */ }
> >  };
> > @@ -668,6 +818,7 @@ MODULE_DEVICE_TABLE(of, axp20x_adc_of_match);
> >  static const struct platform_device_id axp20x_adc_id_match[] = {
> >  	{ .name = "axp20x-adc", .driver_data = (kernel_ulong_t)&axp20x_data, },
> >  	{ .name = "axp22x-adc", .driver_data = (kernel_ulong_t)&axp22x_data, },
> > +	{ .name = "axp717-adc", .driver_data = (kernel_ulong_t)&axp717_data, },
> >  	{ .name = "axp813-adc", .driver_data = (kernel_ulong_t)&axp813_data, },
> >  	{ /* sentinel */ },
> >  };
> > @@ -709,15 +860,17 @@ static int axp20x_probe(struct platform_device *pdev)
> >  	indio_dev->channels = info->data->channels;
> >  
> >  	/* Enable the ADCs on IP */
> > -	regmap_write(info->regmap, AXP20X_ADC_EN1, info->data->adc_en1_mask);
> > +	regmap_write(info->regmap, info->data->adc_en1,
> > +		     info->data->adc_en1_mask);
> >  
> >  	if (info->data->adc_en2_mask)
> > -		regmap_update_bits(info->regmap, AXP20X_ADC_EN2,
> > +		regmap_update_bits(info->regmap, info->data->adc_en2,
> >  				   info->data->adc_en2_mask,
> >  				   info->data->adc_en2_mask);
> >  
> >  	/* Configure ADCs rate */
> > -	info->data->adc_rate(info, 100);
> > +	if (info->data->adc_rate)
> > +		info->data->adc_rate(info, 100);
> >  
> >  	ret = iio_map_array_register(indio_dev, info->data->maps);
> >  	if (ret < 0) {
> > @@ -737,10 +890,10 @@ static int axp20x_probe(struct platform_device *pdev)
> >  	iio_map_array_unregister(indio_dev);
> >  
> >  fail_map:
> > -	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
> > +	regmap_write(info->regmap, info->data->adc_en1, 0);
> >  
> >  	if (info->data->adc_en2_mask)
> > -		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
> > +		regmap_write(info->regmap, info->data->adc_en2, 0);
> >  
> >  	return ret;
> >  }
> > @@ -753,10 +906,10 @@ static void axp20x_remove(struct platform_device *pdev)
> >  	iio_device_unregister(indio_dev);
> >  	iio_map_array_unregister(indio_dev);
> >  
> > -	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
> > +	regmap_write(info->regmap, info->data->adc_en1, 0);
> >  
> >  	if (info->data->adc_en2_mask)
> > -		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
> > +		regmap_write(info->regmap, info->data->adc_en2, 0);
> >  }
> >  
> >  static struct platform_driver axp20x_adc_driver = {
> > -- 
> > 2.34.1
> > 

Thank you for the feedback,
Chris
diff mbox series

Patch

diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
index d6c51b0f48e3..f35ba2c11e1b 100644
--- a/drivers/iio/adc/axp20x_adc.c
+++ b/drivers/iio/adc/axp20x_adc.c
@@ -5,6 +5,7 @@ 
  *	Quentin Schulz <quentin.schulz@free-electrons.com>
  */
 
+#include <asm/unaligned.h>
 #include <linux/bitfield.h>
 #include <linux/completion.h>
 #include <linux/interrupt.h>
@@ -27,6 +28,8 @@ 
 
 #define AXP22X_ADC_EN1_MASK			(GENMASK(7, 5) | BIT(0))
 
+#define AXP717_ADC_EN1_MASK			GENMASK(5, 0)
+
 #define AXP20X_GPIO10_IN_RANGE_GPIO0		BIT(0)
 #define AXP20X_GPIO10_IN_RANGE_GPIO1		BIT(1)
 
@@ -35,6 +38,11 @@ 
 
 #define AXP22X_ADC_RATE_HZ(x)			((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK)
 
+#define AXP717_ADC_DATA_TS			0x00
+#define AXP717_ADC_DATA_TEMP			0x01
+
+#define AXP717_ADC_DATA_MASK			0x3fff
+
 #define AXP813_V_I_ADC_RATE_MASK		GENMASK(5, 4)
 #define AXP813_ADC_RATE_MASK			(AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
 #define AXP813_TS_GPIO0_ADC_RATE_HZ(x)		AXP20X_ADC_RATE_HZ(x)
@@ -98,6 +106,18 @@  enum axp22x_adc_channel_i {
 	AXP22X_BATT_DISCHRG_I,
 };
 
+enum axp717_adc_channel_v {
+	AXP717_BATT_V = 0,
+	AXP717_TS_IN,
+	AXP717_VBUS_V,
+	AXP717_VSYS_V,
+	AXP717_DIE_TEMP_V,
+};
+
+enum axp717_adc_channel_i {
+	AXP717_BATT_CHRG_I = 5,
+};
+
 enum axp813_adc_channel_v {
 	AXP813_TS_IN = 0,
 	AXP813_GPIO0_V,
@@ -152,6 +172,22 @@  static struct iio_map axp22x_maps[] = {
 	}, { /* sentinel */ }
 };
 
+static struct iio_map axp717_maps[] = {
+	{
+		.consumer_dev_name = "axp20x-usb-power-supply",
+		.consumer_channel = "vbus_v",
+		.adc_channel_label = "vbus_v",
+	}, {
+		.consumer_dev_name = "axp20x-battery-power-supply",
+		.consumer_channel = "batt_v",
+		.adc_channel_label = "batt_v",
+	}, {
+		.consumer_dev_name = "axp20x-battery-power-supply",
+		.consumer_channel = "batt_chrg_i",
+		.adc_channel_label = "batt_chrg_i",
+	},
+};
+
 /*
  * Channels are mapped by physical system. Their channels share the same index.
  * i.e. acin_i is in_current0_raw and acin_v is in_voltage0_raw.
@@ -210,6 +246,25 @@  static const struct iio_chan_spec axp22x_adc_channels[] = {
 			   AXP22X_TS_ADC_H),
 };
 
+/*
+ * Scale and offset is unknown for temp, ts, and batt_chrg_i channels
+ * for now. Leaving scale and offset undefined for now.
+ */
+static const struct iio_chan_spec axp717_adc_channels[] = {
+	AXP20X_ADC_CHANNEL(AXP717_BATT_V, "batt_v", IIO_VOLTAGE,
+			   AXP717_BATT_V_H),
+	AXP20X_ADC_CHANNEL(AXP717_TS_IN, "ts_v", IIO_VOLTAGE,
+			   AXP717_ADC_DATA_H),
+	AXP20X_ADC_CHANNEL(AXP717_VBUS_V, "vbus_v", IIO_VOLTAGE,
+			   AXP717_VBUS_V_H),
+	AXP20X_ADC_CHANNEL(AXP717_VSYS_V, "vsys_v", IIO_VOLTAGE,
+			   AXP717_VSYS_V_H),
+	AXP20X_ADC_CHANNEL(AXP717_DIE_TEMP_V, "pmic_temp", IIO_TEMP,
+				  AXP717_ADC_DATA_H),
+	AXP20X_ADC_CHANNEL(AXP717_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT,
+			   AXP717_BATT_CHRG_I_H),
+};
+
 static const struct iio_chan_spec axp813_adc_channels[] = {
 	{
 		.type = IIO_TEMP,
@@ -269,6 +324,44 @@  static int axp22x_adc_raw(struct iio_dev *indio_dev,
 	return IIO_VAL_INT;
 }
 
+static int axp717_adc_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan, int *val)
+{
+	struct axp20x_adc_iio *info = iio_priv(indio_dev);
+	u8 bulk_reg[2];
+	int ret;
+
+	/*
+	 * A generic "ADC data" channel is used for TS, tdie, vmid,
+	 * and vbackup. This channel must both first be enabled and
+	 * also selected before it can be read.
+	 */
+	switch (chan->channel) {
+	case AXP717_TS_IN:
+		regmap_write(info->regmap, AXP717_ADC_DATA_SEL,
+			     AXP717_ADC_DATA_TS);
+		break;
+	case AXP717_DIE_TEMP_V:
+		regmap_write(info->regmap, AXP717_ADC_DATA_SEL,
+			     AXP717_ADC_DATA_TEMP);
+		break;
+
+	default:
+		break;
+	}
+
+	/*
+	 * All channels are 14 bits, with the first 2 bits on the high
+	 * register reserved and the remaining bits as the ADC value.
+	 */
+	ret = regmap_bulk_read(info->regmap, chan->address, bulk_reg, 2);
+	if (ret < 0)
+		return ret;
+
+	*val = get_unaligned_be16(bulk_reg) & AXP717_ADC_DATA_MASK;
+	return IIO_VAL_INT;
+}
+
 static int axp813_adc_raw(struct iio_dev *indio_dev,
 			  struct iio_chan_spec const *chan, int *val)
 {
@@ -425,6 +518,27 @@  static int axp22x_adc_scale(struct iio_chan_spec const *chan, int *val,
 	}
 }
 
+static int axp717_adc_scale(struct iio_chan_spec const *chan, int *val,
+			    int *val2)
+{
+	switch (chan->type) {
+	case IIO_VOLTAGE:
+		*val = 1;
+		return IIO_VAL_INT;
+
+	case IIO_CURRENT:
+		*val = 1;
+		return IIO_VAL_INT;
+
+	case IIO_TEMP:
+		*val = 100;
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
 static int axp813_adc_scale(struct iio_chan_spec const *chan, int *val,
 			    int *val2)
 {
@@ -529,6 +643,22 @@  static int axp22x_read_raw(struct iio_dev *indio_dev,
 	}
 }
 
+static int axp717_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan, int *val,
+			   int *val2, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return axp717_adc_scale(chan, val, val2);
+
+	case IIO_CHAN_INFO_RAW:
+		return axp717_adc_raw(indio_dev, chan, val);
+
+	default:
+		return -EINVAL;
+	}
+}
+
 static int axp813_read_raw(struct iio_dev *indio_dev,
 			   struct iio_chan_spec const *chan, int *val,
 			   int *val2, long mask)
@@ -593,6 +723,10 @@  static const struct iio_info axp22x_adc_iio_info = {
 	.read_raw = axp22x_read_raw,
 };
 
+static const struct iio_info axp717_adc_iio_info = {
+	.read_raw = axp717_read_raw,
+};
+
 static const struct iio_info axp813_adc_iio_info = {
 	.read_raw = axp813_read_raw,
 };
@@ -622,7 +756,9 @@  struct axp_data {
 	const struct iio_info		*iio_info;
 	int				num_channels;
 	struct iio_chan_spec const	*channels;
+	unsigned long			adc_en1;
 	unsigned long			adc_en1_mask;
+	unsigned long			adc_en2;
 	unsigned long			adc_en2_mask;
 	int				(*adc_rate)(struct axp20x_adc_iio *info,
 						    int rate);
@@ -633,7 +769,9 @@  static const struct axp_data axp20x_data = {
 	.iio_info = &axp20x_adc_iio_info,
 	.num_channels = ARRAY_SIZE(axp20x_adc_channels),
 	.channels = axp20x_adc_channels,
+	.adc_en1 = AXP20X_ADC_EN1,
 	.adc_en1_mask = AXP20X_ADC_EN1_MASK,
+	.adc_en2 = AXP20X_ADC_EN2,
 	.adc_en2_mask = AXP20X_ADC_EN2_MASK,
 	.adc_rate = axp20x_adc_rate,
 	.maps = axp20x_maps,
@@ -643,15 +781,26 @@  static const struct axp_data axp22x_data = {
 	.iio_info = &axp22x_adc_iio_info,
 	.num_channels = ARRAY_SIZE(axp22x_adc_channels),
 	.channels = axp22x_adc_channels,
+	.adc_en1 = AXP20X_ADC_EN1,
 	.adc_en1_mask = AXP22X_ADC_EN1_MASK,
 	.adc_rate = axp22x_adc_rate,
 	.maps = axp22x_maps,
 };
 
+static const struct axp_data axp717_data = {
+	.iio_info = &axp717_adc_iio_info,
+	.num_channels = ARRAY_SIZE(axp717_adc_channels),
+	.channels = axp717_adc_channels,
+	.adc_en1 = AXP717_ADC_CH_EN_CONTROL,
+	.adc_en1_mask = AXP717_ADC_EN1_MASK,
+	.maps = axp717_maps,
+};
+
 static const struct axp_data axp813_data = {
 	.iio_info = &axp813_adc_iio_info,
 	.num_channels = ARRAY_SIZE(axp813_adc_channels),
 	.channels = axp813_adc_channels,
+	.adc_en1 = AXP20X_ADC_EN1,
 	.adc_en1_mask = AXP22X_ADC_EN1_MASK,
 	.adc_rate = axp813_adc_rate,
 	.maps = axp22x_maps,
@@ -660,6 +809,7 @@  static const struct axp_data axp813_data = {
 static const struct of_device_id axp20x_adc_of_match[] = {
 	{ .compatible = "x-powers,axp209-adc", .data = (void *)&axp20x_data, },
 	{ .compatible = "x-powers,axp221-adc", .data = (void *)&axp22x_data, },
+	{ .compatible = "x-powers,axp717-adc", .data = (void *)&axp717_data, },
 	{ .compatible = "x-powers,axp813-adc", .data = (void *)&axp813_data, },
 	{ /* sentinel */ }
 };
@@ -668,6 +818,7 @@  MODULE_DEVICE_TABLE(of, axp20x_adc_of_match);
 static const struct platform_device_id axp20x_adc_id_match[] = {
 	{ .name = "axp20x-adc", .driver_data = (kernel_ulong_t)&axp20x_data, },
 	{ .name = "axp22x-adc", .driver_data = (kernel_ulong_t)&axp22x_data, },
+	{ .name = "axp717-adc", .driver_data = (kernel_ulong_t)&axp717_data, },
 	{ .name = "axp813-adc", .driver_data = (kernel_ulong_t)&axp813_data, },
 	{ /* sentinel */ },
 };
@@ -709,15 +860,17 @@  static int axp20x_probe(struct platform_device *pdev)
 	indio_dev->channels = info->data->channels;
 
 	/* Enable the ADCs on IP */
-	regmap_write(info->regmap, AXP20X_ADC_EN1, info->data->adc_en1_mask);
+	regmap_write(info->regmap, info->data->adc_en1,
+		     info->data->adc_en1_mask);
 
 	if (info->data->adc_en2_mask)
-		regmap_update_bits(info->regmap, AXP20X_ADC_EN2,
+		regmap_update_bits(info->regmap, info->data->adc_en2,
 				   info->data->adc_en2_mask,
 				   info->data->adc_en2_mask);
 
 	/* Configure ADCs rate */
-	info->data->adc_rate(info, 100);
+	if (info->data->adc_rate)
+		info->data->adc_rate(info, 100);
 
 	ret = iio_map_array_register(indio_dev, info->data->maps);
 	if (ret < 0) {
@@ -737,10 +890,10 @@  static int axp20x_probe(struct platform_device *pdev)
 	iio_map_array_unregister(indio_dev);
 
 fail_map:
-	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
+	regmap_write(info->regmap, info->data->adc_en1, 0);
 
 	if (info->data->adc_en2_mask)
-		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
+		regmap_write(info->regmap, info->data->adc_en2, 0);
 
 	return ret;
 }
@@ -753,10 +906,10 @@  static void axp20x_remove(struct platform_device *pdev)
 	iio_device_unregister(indio_dev);
 	iio_map_array_unregister(indio_dev);
 
-	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
+	regmap_write(info->regmap, info->data->adc_en1, 0);
 
 	if (info->data->adc_en2_mask)
-		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
+		regmap_write(info->regmap, info->data->adc_en2, 0);
 }
 
 static struct platform_driver axp20x_adc_driver = {