diff mbox series

[v7,1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub

Message ID 20240613123020.43500-1-linux.amoon@gmail.com
State New
Headers show
Series [v7,1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub | expand

Commit Message

Anand Moon June 13, 2024, 12:30 p.m. UTC
Add the binding example for the USB3.1 Genesys Logic GL3523
integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
hub.

For onboard hub controllers that support USB 3.x and USB 2.0 hubs
with shared resets and power supplies, this property is used to identify
the hubs with which these are shared.

GL3523 has built-in 5V to 3.3V and 5V to 1.2V regulators, which serves
power to the USB HUB, it uses 5V power regulator.

Update the peer-hub description.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Now with fresh install image and updated dtschema all the
dt_binding_check pass

make DT_CHECKER_FLAGS=-m -j$(nproc) dt_binding_check

V7: dropped the reset-gpios: true:
Rob 'No need for this if schema. The default is they are allowed.'
[7] https://lore.kernel.org/lkml/194aa24c-2763-47e2-8ccc-1637d299c1ba@linaro.org/T/

V6: fix the description of the regulators
Updated the commit message for regulator updates.
add reviewed by Conor Dooley
[1] https://lore.kernel.org/all/20231130053130.21966-2-linux.amoon@gmail.com/
v5: upgrade peer-hub description : Conor Dooley
[0] https://www.genesyslogic.com.tw/en/product_view.php?show=67 [Block Diagram]
v4: Fix the description of peer-hub and update the commit message.
Schematics of the Odroid N2+
https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
V3: fix the dt_binding_check error, added new example for Genesys GL3523
v2: added Genesys GL3523 binding
v1: none
---
 .../bindings/usb/genesys,gl850g.yaml          | 60 +++++++++++++++++--
 1 file changed, 55 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
index 37cf5249e526..fc833363cfb4 100644
--- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
+++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
@@ -9,9 +9,6 @@  title: Genesys Logic USB hub controller
 maintainers:
   - Icenowy Zheng <uwu@icenowy.me>
 
-allOf:
-  - $ref: usb-device.yaml#
-
 properties:
   compatible:
     enum:
@@ -27,17 +24,44 @@  properties:
 
   vdd-supply:
     description:
-      the regulator that provides 3.3V core power to the hub.
+      The regulator that provides 3.3V or 5.0V core power to the hub.
 
   peer-hub:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      phandle to the peer hub on the controller.
+      For onboard hub controllers that support USB 3.x and USB 2.0 hubs
+      with shared resets and power supplies, this property is used to identify
+      the hubs with which these are shared.
 
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: usb-device.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - usb5e3,608
+    then:
+      properties:
+        peer-hub: false
+        vdd-supply: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - usb5e3,610
+              - usb5e3,620
+    then:
+      properties:
+        peer-hub: true
+        vdd-supply: true
+
 additionalProperties: false
 
 examples:
@@ -54,3 +78,29 @@  examples:
             reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
         };
     };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+            compatible = "usb5e3,610";
+            reg = <1>;
+            peer-hub = <&hub_3_0>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_5v>;
+        };
+
+        /* 3.1 hub on port 4 */
+        hub_3_0: hub@2 {
+            compatible = "usb5e3,620";
+            reg = <2>;
+            peer-hub = <&hub_2_0>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_5v>;
+        };
+    };