| Message ID | 20240613164506.982068-1-quic_sibis@quicinc.com |
|---|---|
| State | Accepted |
| Commit | 24086640ab39396eb1a92d1cb1cd2f31b2677c52 |
| Headers | show |
| Series | soc: qcom: icc-bwmon: Fix refcount imbalance seen during bwmon_remove | expand |
On 6/13/24 18:45, Sibi Sankar wrote: > The following warning is seen during bwmon_remove due to refcount > imbalance, fix this by releasing the OPPs after use. > > Logs: > WARNING: at drivers/opp/core.c:1640 _opp_table_kref_release+0x150/0x158 > Hardware name: Qualcomm Technologies, Inc. X1E80100 CRD (DT) > ... > Call trace: > _opp_table_kref_release+0x150/0x158 > dev_pm_opp_remove_table+0x100/0x1b4 > devm_pm_opp_of_table_release+0x10/0x1c > devm_action_release+0x14/0x20 > devres_release_all+0xa4/0x104 > device_unbind_cleanup+0x18/0x60 > device_release_driver_internal+0x1ec/0x228 > driver_detach+0x50/0x98 > bus_remove_driver+0x6c/0xbc > driver_unregister+0x30/0x60 > platform_driver_unregister+0x14/0x20 > bwmon_driver_exit+0x18/0x524 [icc_bwmon] > __arm64_sys_delete_module+0x184/0x264 > invoke_syscall+0x48/0x118 > el0_svc_common.constprop.0+0xc8/0xe8 > do_el0_svc+0x20/0x2c > el0_svc+0x34/0xdc > el0t_64_sync_handler+0x13c/0x158 > el0t_64_sync+0x190/0x194 > --[ end trace 0000000000000000 ]--- > > Fixes: 0276f69f13e2 ("soc: qcom: icc-bwmon: Set default thresholds dynamically") > Fixes: b9c2ae6cac40 ("soc: qcom: icc-bwmon: Add bandwidth monitoring driver") > Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
On Thu, 13 Jun 2024 22:15:06 +0530, Sibi Sankar wrote: > The following warning is seen during bwmon_remove due to refcount > imbalance, fix this by releasing the OPPs after use. > > Logs: > WARNING: at drivers/opp/core.c:1640 _opp_table_kref_release+0x150/0x158 > Hardware name: Qualcomm Technologies, Inc. X1E80100 CRD (DT) > ... > Call trace: > _opp_table_kref_release+0x150/0x158 > dev_pm_opp_remove_table+0x100/0x1b4 > devm_pm_opp_of_table_release+0x10/0x1c > devm_action_release+0x14/0x20 > devres_release_all+0xa4/0x104 > device_unbind_cleanup+0x18/0x60 > device_release_driver_internal+0x1ec/0x228 > driver_detach+0x50/0x98 > bus_remove_driver+0x6c/0xbc > driver_unregister+0x30/0x60 > platform_driver_unregister+0x14/0x20 > bwmon_driver_exit+0x18/0x524 [icc_bwmon] > __arm64_sys_delete_module+0x184/0x264 > invoke_syscall+0x48/0x118 > el0_svc_common.constprop.0+0xc8/0xe8 > do_el0_svc+0x20/0x2c > el0_svc+0x34/0xdc > el0t_64_sync_handler+0x13c/0x158 > el0t_64_sync+0x190/0x194 > --[ end trace 0000000000000000 ]--- > > [...] Applied, thanks! [1/1] soc: qcom: icc-bwmon: Fix refcount imbalance seen during bwmon_remove commit: 24086640ab39396eb1a92d1cb1cd2f31b2677c52 Best regards,
diff --git a/drivers/soc/qcom/icc-bwmon.c b/drivers/soc/qcom/icc-bwmon.c index fb323b3364db..ecddb60bd665 100644 --- a/drivers/soc/qcom/icc-bwmon.c +++ b/drivers/soc/qcom/icc-bwmon.c @@ -565,7 +565,7 @@ static void bwmon_start(struct icc_bwmon *bwmon) int window; /* No need to check for errors, as this must have succeeded before. */ - dev_pm_opp_find_bw_ceil(bwmon->dev, &bw_low, 0); + dev_pm_opp_put(dev_pm_opp_find_bw_ceil(bwmon->dev, &bw_low, 0)); bwmon_clear_counters(bwmon, true); @@ -772,11 +772,13 @@ static int bwmon_probe(struct platform_device *pdev) opp = dev_pm_opp_find_bw_floor(dev, &bwmon->max_bw_kbps, 0); if (IS_ERR(opp)) return dev_err_probe(dev, PTR_ERR(opp), "failed to find max peak bandwidth\n"); + dev_pm_opp_put(opp); bwmon->min_bw_kbps = 0; opp = dev_pm_opp_find_bw_ceil(dev, &bwmon->min_bw_kbps, 0); if (IS_ERR(opp)) return dev_err_probe(dev, PTR_ERR(opp), "failed to find min peak bandwidth\n"); + dev_pm_opp_put(opp); bwmon->dev = dev;
The following warning is seen during bwmon_remove due to refcount imbalance, fix this by releasing the OPPs after use. Logs: WARNING: at drivers/opp/core.c:1640 _opp_table_kref_release+0x150/0x158 Hardware name: Qualcomm Technologies, Inc. X1E80100 CRD (DT) ... Call trace: _opp_table_kref_release+0x150/0x158 dev_pm_opp_remove_table+0x100/0x1b4 devm_pm_opp_of_table_release+0x10/0x1c devm_action_release+0x14/0x20 devres_release_all+0xa4/0x104 device_unbind_cleanup+0x18/0x60 device_release_driver_internal+0x1ec/0x228 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 bwmon_driver_exit+0x18/0x524 [icc_bwmon] __arm64_sys_delete_module+0x184/0x264 invoke_syscall+0x48/0x118 el0_svc_common.constprop.0+0xc8/0xe8 do_el0_svc+0x20/0x2c el0_svc+0x34/0xdc el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 --[ end trace 0000000000000000 ]--- Fixes: 0276f69f13e2 ("soc: qcom: icc-bwmon: Set default thresholds dynamically") Fixes: b9c2ae6cac40 ("soc: qcom: icc-bwmon: Add bandwidth monitoring driver") Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> --- drivers/soc/qcom/icc-bwmon.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)