diff mbox series

[v2,4/4] arm64: dts: qcom: sm8650: add description of CCI controllers

Message ID 20240612215835.1149199-5-vladimir.zapolskiy@linaro.org
State New
Headers show
Series arm64: dts: qcom: add description of CCI controllers for sm8550 and sm8650 | expand

Commit Message

Vladimir Zapolskiy June 12, 2024, 9:58 p.m. UTC
Qualcomm SM8650 SoC has three CCI controllers with two I2C busses
connected to each of them.

The CCI controllers on SM8650 are compatible with the ones found on
many other older generations of Qualcomm SoCs.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8650.dtsi | 291 +++++++++++++++++++++++++++
 1 file changed, 291 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index dcbb28850cbc..71fc45e9b9be 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -3329,6 +3329,105 @@  videocc: clock-controller@aaf0000 {
 			#power-domain-cells = <1>;
 		};
 
+		cci0: cci@ac15000 {
+			compatible = "qcom,sm8650-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac15000 0 0x1000>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+			pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac16000 {
+			compatible = "qcom,sm8650-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac16000 0 0x1000>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+			pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci2: cci@ac17000 {
+			compatible = "qcom,sm8650-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac17000 0 0x1000>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_2_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+			pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci2_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci2_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@ade0000 {
 			compatible = "qcom,sm8650-camcc";
 			reg = <0 0x0ade0000 0 0x20000>;
@@ -4029,6 +4128,198 @@  tlmm: pinctrl@f100000 {
 
 			wakeup-parent = <&pdc>;
 
+			cci0_0_default: cci0-0-default-state {
+				sda-pins {
+					pins = "gpio113";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio114";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci0_0_sleep: cci0-0-sleep-state {
+				sda-pins {
+					pins = "gpio113";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio114";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci0_1_default: cci0-1-default-state {
+				sda-pins {
+					pins = "gpio115";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio116";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci0_1_sleep: cci0-1-sleep-state {
+				sda-pins {
+					pins = "gpio115";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio116";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_0_default: cci1-0-default-state {
+				sda-pins {
+					pins = "gpio117";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio118";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci1_0_sleep: cci1-0-sleep-state {
+				sda-pins {
+					pins = "gpio117";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio118";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_1_default: cci1-1-default-state {
+				sda-pins {
+					pins = "gpio12";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio13";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci1_1_sleep: cci1-1-sleep-state {
+				sda-pins {
+					pins = "gpio12";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio13";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci2_0_default: cci2-0-default-state {
+				sda-pins {
+					pins = "gpio112";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio153";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci2_0_sleep: cci2-0-sleep-state {
+				sda-pins {
+					pins = "gpio112";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio153";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci2_1_default: cci2-1-default-state {
+				sda-pins {
+					pins = "gpio119";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio120";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci2_1_sleep: cci2-1-sleep-state {
+				sda-pins {
+					pins = "gpio119";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio120";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
 			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
 				/* SDA, SCL */
 				pins = "gpio64", "gpio65";