| Message ID | 20161031175346.6943-1-semen.protsenko@linaro.org |
|---|---|
| State | Accepted |
| Commit | 4886de76080a970a7153ab802cd083f0a97eb115 |
| Headers | show |
On Mon, Oct 31, 2016 at 7:53 PM, Sam Protsenko <semen.protsenko@linaro.org> wrote: > Make Android partition table the same as for AM57x EVM. > > 1. Make "bootloader" partition start from 0x300 sectors offset, so > DRA7 is bootable in Android mode (see > CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR option). > 2. Increase "bootloader" partition size, because size of u-boot.img is > about 632 KiB (when building DT defconfig, with FIT image enabled). > 3. Specify "reserved" partition explicitly, rather than specifying > "efs" partition start. Reserved area will be used to store U-Boot > environment on eMMC. It's convenient to have it exposed explicitly > so we can read/write U-Boot environment. > 4. Keep all Android partitions locations intact, by reducing > "reserved" partition size. CONFIG_ENV_SIZE is considered. > > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> > --- > Changes in v2: None > > include/configs/dra7xx_evm.h | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h > index 798002d..1834d04 100644 > --- a/include/configs/dra7xx_evm.h > +++ b/include/configs/dra7xx_evm.h > @@ -54,11 +54,12 @@ > /* Android partitions */ \ > "partitions_android=" \ > "uuid_disk=${uuid_gpt_disk};" \ > - "name=xloader,start=128K,size=128K,uuid=${uuid_gpt_xloader};" \ > - "name=bootloader,size=384K,uuid=${uuid_gpt_bootloader};" \ > + "name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \ > + "name=bootloader,size=768K,uuid=${uuid_gpt_bootloader};" \ > "name=environment,size=128K,uuid=${uuid_gpt_environment};" \ > "name=misc,size=128K,uuid=${uuid_gpt_misc};" \ > - "name=efs,start=1280K,size=16M,uuid=${uuid_gpt_efs};" \ > + "name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \ > + "name=efs,size=16M,uuid=${uuid_gpt_efs};" \ > "name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \ > "name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \ > "name=boot,size=10M,uuid=${uuid_gpt_boot};" \ > -- > 2.9.3 > Bump. Please review and apply 3 patches from this series. Thanks. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
On Mon, Oct 31, 2016 at 07:53:46PM +0200, Semen Protsenko wrote: > Make Android partition table the same as for AM57x EVM. > > 1. Make "bootloader" partition start from 0x300 sectors offset, so > DRA7 is bootable in Android mode (see > CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR option). > 2. Increase "bootloader" partition size, because size of u-boot.img is > about 632 KiB (when building DT defconfig, with FIT image enabled). > 3. Specify "reserved" partition explicitly, rather than specifying > "efs" partition start. Reserved area will be used to store U-Boot > environment on eMMC. It's convenient to have it exposed explicitly > so we can read/write U-Boot environment. > 4. Keep all Android partitions locations intact, by reducing > "reserved" partition size. CONFIG_ENV_SIZE is considered. > > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Applied to u-boot/master, thanks! -- Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 798002d..1834d04 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -54,11 +54,12 @@ /* Android partitions */ \ "partitions_android=" \ "uuid_disk=${uuid_gpt_disk};" \ - "name=xloader,start=128K,size=128K,uuid=${uuid_gpt_xloader};" \ - "name=bootloader,size=384K,uuid=${uuid_gpt_bootloader};" \ + "name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \ + "name=bootloader,size=768K,uuid=${uuid_gpt_bootloader};" \ "name=environment,size=128K,uuid=${uuid_gpt_environment};" \ "name=misc,size=128K,uuid=${uuid_gpt_misc};" \ - "name=efs,start=1280K,size=16M,uuid=${uuid_gpt_efs};" \ + "name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \ + "name=efs,size=16M,uuid=${uuid_gpt_efs};" \ "name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \ "name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \ "name=boot,size=10M,uuid=${uuid_gpt_boot};" \
Make Android partition table the same as for AM57x EVM. 1. Make "bootloader" partition start from 0x300 sectors offset, so DRA7 is bootable in Android mode (see CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR option). 2. Increase "bootloader" partition size, because size of u-boot.img is about 632 KiB (when building DT defconfig, with FIT image enabled). 3. Specify "reserved" partition explicitly, rather than specifying "efs" partition start. Reserved area will be used to store U-Boot environment on eMMC. It's convenient to have it exposed explicitly so we can read/write U-Boot environment. 4. Keep all Android partitions locations intact, by reducing "reserved" partition size. CONFIG_ENV_SIZE is considered. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> --- Changes in v2: None include/configs/dra7xx_evm.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) -- 2.9.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot