diff mbox series

[v2,3/3] riscv: dts: starfive: jh7110: Add the core reset and jh7110 compatible for uarts

Message ID 20240604084729.57239-4-hal.feng@starfivetech.com
State New
Headers show
Series Add the core reset for UARTs of StarFive JH7110 | expand

Commit Message

Hal Feng June 4, 2024, 8:47 a.m. UTC
Add the core reset for uarts, which is necessary for uarts to work.

Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 30 ++++++++++++++----------
 1 file changed, 18 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 18047195c600..7661ccf7406f 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -387,12 +387,13 @@  plic: interrupt-controller@c000000 {
 		};
 
 		uart0: serial@10000000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x10000000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART0_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART0_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART0_APB>,
+				 <&syscrg JH7110_SYSRST_UART0_CORE>;
 			interrupts = <32>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -400,12 +401,13 @@  uart0: serial@10000000 {
 		};
 
 		uart1: serial@10010000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x10010000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART1_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART1_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART1_APB>,
+				 <&syscrg JH7110_SYSRST_UART1_CORE>;
 			interrupts = <33>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -413,12 +415,13 @@  uart1: serial@10010000 {
 		};
 
 		uart2: serial@10020000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x10020000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART2_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART2_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART2_APB>,
+				 <&syscrg JH7110_SYSRST_UART2_CORE>;
 			interrupts = <34>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -642,12 +645,13 @@  stg_syscon: syscon@10240000 {
 		};
 
 		uart3: serial@12000000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x12000000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART3_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART3_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART3_APB>,
+				 <&syscrg JH7110_SYSRST_UART3_CORE>;
 			interrupts = <45>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -655,12 +659,13 @@  uart3: serial@12000000 {
 		};
 
 		uart4: serial@12010000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x12010000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART4_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART4_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART4_APB>,
+				 <&syscrg JH7110_SYSRST_UART4_CORE>;
 			interrupts = <46>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -668,12 +673,13 @@  uart4: serial@12010000 {
 		};
 
 		uart5: serial@12020000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x12020000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART5_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART5_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART5_APB>,
+				 <&syscrg JH7110_SYSRST_UART5_CORE>;
 			interrupts = <47>;
 			reg-io-width = <4>;
 			reg-shift = <2>;