@@ -841,7 +841,7 @@ &uart21 {
&usb_1_ss0_hsphy {
vdd-supply = <&vreg_l2e_0p8>;
- vdda12-supply = <&vreg_l3e_1p2>;
+ vdda12-supply = <&vreg_l2j_1p2>;
phys = <&smb2360_0_eusb2_repeater>;
@@ -849,6 +849,9 @@ &usb_1_ss0_hsphy {
};
&usb_1_ss0_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l1j_0p8>;
+
status = "okay";
};
@@ -862,7 +865,7 @@ &usb_1_ss0_dwc3 {
&usb_1_ss1_hsphy {
vdd-supply = <&vreg_l2e_0p8>;
- vdda12-supply = <&vreg_l3e_1p2>;
+ vdda12-supply = <&vreg_l2j_1p2>;
phys = <&smb2360_1_eusb2_repeater>;
@@ -870,6 +873,9 @@ &usb_1_ss1_hsphy {
};
&usb_1_ss1_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p9>;
+
status = "okay";
};
@@ -883,7 +889,7 @@ &usb_1_ss1_dwc3 {
&usb_1_ss2_hsphy {
vdd-supply = <&vreg_l2e_0p8>;
- vdda12-supply = <&vreg_l3e_1p2>;
+ vdda12-supply = <&vreg_l2j_1p2>;
phys = <&smb2360_2_eusb2_repeater>;
@@ -891,6 +897,9 @@ &usb_1_ss2_hsphy {
};
&usb_1_ss2_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p9>;
+
status = "okay";
};
The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J. Also add the missing supplies to QMP PHYs. Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support") Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)