| Message ID | 20240527125608.2461300-3-spujar@nvidia.com |
|---|---|
| State | New |
| Headers | show |
| Series | Support Tegra I2S client format conversion | expand |
On Mon May 27, 2024 at 2:56 PM CEST, Sameer Pujar wrote: > From: Mohan Kumar <mkumard@nvidia.com> > > The AHUB HW modules are interconnected with CIF which are capable of > supporting Channel and Sample bit format conversion. Due to this, the > I2S Client can have different Channel and Sample bit from the hw_params() > and this config is passed from CIF port of I2S DT node which can help to > perform this conversion. > > For e.g. HFP usecase consists of BT SCO with 1ch and 8k audio data > which needs to be converted and mixed with external codec playback and > capture path which is of 2ch and 48k format. > > For HFP Playback: > The path includes mono to stereo and 8k to 48k conversion > _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > | |1ch | | 1ch | |2ch | SFC | 2ch | | > |BT SCO |---->| I2Sx |------>| CIF |----->| 8k->48k |---->| Codec I2Sy| > |_ _ _ _| |_ _ __|client |_ _ _|audio |_ _ _ _ _| |_ _ _ _ _ _| > > For HFP Capture: > The path includes stereo to mono and 48k to 8k conversion > _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > | | 2ch | SFC | 2ch | | 1ch | | 1ch | | > | codec I2Sy|---->| 48k->8k |----->| CIF |------>| I2Sx |---->| BT SCO| > |_ _ _ _ _ _| |_ _ _ _ _| audio|_ _ _|client |_ _ _ _| |_ _ _ _| > > For above two path, I2S client channel uses existing DT binding to pass > channels and format conversion in I2Sx CIF Port. > > Signed-off-by: Mohan Kumar <mkumard@nvidia.com> > Signed-off-by: Sameer Pujar <spujar@nvidia.com> > --- > sound/soc/tegra/tegra210_i2s.c | 71 ++++++++++++++++++++++++++++++++-- > sound/soc/tegra/tegra210_i2s.h | 2 + > 2 files changed, 69 insertions(+), 4 deletions(-) > > diff --git a/sound/soc/tegra/tegra210_i2s.c b/sound/soc/tegra/tegra210_i2s.c > index ba7fdd7405ac..fe4fde844d86 100644 > --- a/sound/soc/tegra/tegra210_i2s.c > +++ b/sound/soc/tegra/tegra210_i2s.c > @@ -8,11 +8,13 @@ > #include <linux/device.h> > #include <linux/mod_devicetable.h> > #include <linux/module.h> > +#include <linux/of_graph.h> > #include <linux/platform_device.h> > #include <linux/pm_runtime.h> > #include <linux/regmap.h> > #include <sound/core.h> > #include <sound/pcm_params.h> > +#include <sound/simple_card_utils.h> > #include <sound/soc.h> > #include "tegra210_i2s.h" > #include "tegra_cif.h" > @@ -603,6 +605,7 @@ static int tegra210_i2s_hw_params(struct snd_pcm_substream *substream, > struct tegra210_i2s *i2s = snd_soc_dai_get_drvdata(dai); > unsigned int sample_size, channels, srate, val, reg, path; > struct tegra_cif_conf cif_conf; > + snd_pcm_format_t sample_format; > > memset(&cif_conf, 0, sizeof(struct tegra_cif_conf)); > > @@ -615,28 +618,51 @@ static int tegra210_i2s_hw_params(struct snd_pcm_substream *substream, > > cif_conf.audio_ch = channels; > cif_conf.client_ch = channels; > + if (i2s->client_channels) > + cif_conf.client_ch = i2s->client_channels; > > + /* AHUB CIF Audio bits configs */ > switch (params_format(params)) { > + case SNDRV_PCM_FORMAT_S8: > + cif_conf.audio_bits = TEGRA_ACIF_BITS_8; > + break; > + case SNDRV_PCM_FORMAT_S16_LE: > + cif_conf.audio_bits = TEGRA_ACIF_BITS_16; > + break; > + case SNDRV_PCM_FORMAT_S32_LE: > + cif_conf.audio_bits = TEGRA_ACIF_BITS_32; > + break; > + default: > + dev_err(dev, "unsupported params audio bit format!\n"); > + return -EOPNOTSUPP; > + } > + > + sample_format = params_format(params); Maybe you can move this before the switch and then reuse sample_format in the switch? > + if (i2s->client_sample_format >= 0) > + sample_format = (snd_pcm_format_t)i2s->client_sample_format; > + > + /* > + * Format of the I2S for sending/receiving the audio > + * to/from external device. > + */ > + switch (sample_format) { > case SNDRV_PCM_FORMAT_S8: > val = I2S_BITS_8; > sample_size = 8; > - cif_conf.audio_bits = TEGRA_ACIF_BITS_8; > cif_conf.client_bits = TEGRA_ACIF_BITS_8; > break; > case SNDRV_PCM_FORMAT_S16_LE: > val = I2S_BITS_16; > sample_size = 16; > - cif_conf.audio_bits = TEGRA_ACIF_BITS_16; > cif_conf.client_bits = TEGRA_ACIF_BITS_16; > break; > case SNDRV_PCM_FORMAT_S32_LE: > val = I2S_BITS_32; > sample_size = 32; > - cif_conf.audio_bits = TEGRA_ACIF_BITS_32; > cif_conf.client_bits = TEGRA_ACIF_BITS_32; > break; > default: > - dev_err(dev, "unsupported format!\n"); > + dev_err(dev, "unsupported client bit format!\n"); > return -EOPNOTSUPP; > } > > @@ -872,6 +898,40 @@ static const struct regmap_config tegra210_i2s_regmap_config = { > .cache_type = REGCACHE_FLAT, > }; > > +/* > + * The AHUB HW modules are interconnected with CIF which are capable of > + * supporting Channel and Sample bit format conversion. This needs different > + * CIF Audio and client configuration. As one of the config comes from > + * params_channels() or params_format(), the extra configuration is passed from > + * CIF Port of DT I2S node which can help to perform this conversion. > + * > + * 4ch audio = 4ch client = 2ch 2ch > + * -----> ADMAIF -----------> CIF -------------> I2S ----> > + */ > +static void tegra210_parse_client_convert(struct device *dev) > +{ > + struct tegra210_i2s *i2s = dev_get_drvdata(dev); > + struct device_node *ports, *ep; > + struct simple_util_data data = {}; > + int cif_port = 0; > + > + ports = of_get_child_by_name(dev->of_node, "ports"); > + if (ports) { > + ep = of_graph_get_endpoint_by_regs(ports, cif_port, -1); > + if (ep) { > + simple_util_parse_convert(ep, NULL, &data); > + of_node_put(ep); > + } > + of_node_put(ports); You could maybe try to use the "new" __free() anotation here to have this cleaned up automatically. It'd look something like this: struct device_node *ports __free(device_node), *ep __free(device_node); And then you should be able to omit both of those of_node_put() calls. It may not be worth doing in this case because the declaration becomes unwieldy and there aren't a lot of these calls. > + } > + > + if (data.convert_channels) > + i2s->client_channels = data.convert_channels; > + > + if (data.convert_sample_format) > + i2s->client_sample_format = simple_util_get_sample_fmt(&data); > +} > + > static int tegra210_i2s_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > @@ -887,6 +947,7 @@ static int tegra210_i2s_probe(struct platform_device *pdev) > i2s->tx_mask = DEFAULT_I2S_SLOT_MASK; > i2s->rx_mask = DEFAULT_I2S_SLOT_MASK; > i2s->loopback = false; > + i2s->client_sample_format = -EINVAL; > > dev_set_drvdata(dev, i2s); > > @@ -916,6 +977,8 @@ static int tegra210_i2s_probe(struct platform_device *pdev) > return PTR_ERR(i2s->regmap); > } > > + tegra210_parse_client_convert(dev); > + > regcache_cache_only(i2s->regmap, true); > > err = devm_snd_soc_register_component(dev, &tegra210_i2s_cmpnt, > diff --git a/sound/soc/tegra/tegra210_i2s.h b/sound/soc/tegra/tegra210_i2s.h > index 030d70c45e18..fe478f3d8435 100644 > --- a/sound/soc/tegra/tegra210_i2s.h > +++ b/sound/soc/tegra/tegra210_i2s.h > @@ -112,6 +112,8 @@ struct tegra210_i2s { > struct clk *clk_i2s; > struct clk *clk_sync_input; > struct regmap *regmap; > + int client_sample_format; Given that snd_pcm_format_t is defined to be int, can you store that in here directly? That way you only need to cast when getting the sample format. Anyway, very small nitpicks, so either way: Reviewed-by: Thierry Reding <treding@nvidia.com>
diff --git a/sound/soc/tegra/tegra210_i2s.c b/sound/soc/tegra/tegra210_i2s.c index ba7fdd7405ac..fe4fde844d86 100644 --- a/sound/soc/tegra/tegra210_i2s.c +++ b/sound/soc/tegra/tegra210_i2s.c @@ -8,11 +8,13 @@ #include <linux/device.h> #include <linux/mod_devicetable.h> #include <linux/module.h> +#include <linux/of_graph.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <sound/core.h> #include <sound/pcm_params.h> +#include <sound/simple_card_utils.h> #include <sound/soc.h> #include "tegra210_i2s.h" #include "tegra_cif.h" @@ -603,6 +605,7 @@ static int tegra210_i2s_hw_params(struct snd_pcm_substream *substream, struct tegra210_i2s *i2s = snd_soc_dai_get_drvdata(dai); unsigned int sample_size, channels, srate, val, reg, path; struct tegra_cif_conf cif_conf; + snd_pcm_format_t sample_format; memset(&cif_conf, 0, sizeof(struct tegra_cif_conf)); @@ -615,28 +618,51 @@ static int tegra210_i2s_hw_params(struct snd_pcm_substream *substream, cif_conf.audio_ch = channels; cif_conf.client_ch = channels; + if (i2s->client_channels) + cif_conf.client_ch = i2s->client_channels; + /* AHUB CIF Audio bits configs */ switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + cif_conf.audio_bits = TEGRA_ACIF_BITS_8; + break; + case SNDRV_PCM_FORMAT_S16_LE: + cif_conf.audio_bits = TEGRA_ACIF_BITS_16; + break; + case SNDRV_PCM_FORMAT_S32_LE: + cif_conf.audio_bits = TEGRA_ACIF_BITS_32; + break; + default: + dev_err(dev, "unsupported params audio bit format!\n"); + return -EOPNOTSUPP; + } + + sample_format = params_format(params); + if (i2s->client_sample_format >= 0) + sample_format = (snd_pcm_format_t)i2s->client_sample_format; + + /* + * Format of the I2S for sending/receiving the audio + * to/from external device. + */ + switch (sample_format) { case SNDRV_PCM_FORMAT_S8: val = I2S_BITS_8; sample_size = 8; - cif_conf.audio_bits = TEGRA_ACIF_BITS_8; cif_conf.client_bits = TEGRA_ACIF_BITS_8; break; case SNDRV_PCM_FORMAT_S16_LE: val = I2S_BITS_16; sample_size = 16; - cif_conf.audio_bits = TEGRA_ACIF_BITS_16; cif_conf.client_bits = TEGRA_ACIF_BITS_16; break; case SNDRV_PCM_FORMAT_S32_LE: val = I2S_BITS_32; sample_size = 32; - cif_conf.audio_bits = TEGRA_ACIF_BITS_32; cif_conf.client_bits = TEGRA_ACIF_BITS_32; break; default: - dev_err(dev, "unsupported format!\n"); + dev_err(dev, "unsupported client bit format!\n"); return -EOPNOTSUPP; } @@ -872,6 +898,40 @@ static const struct regmap_config tegra210_i2s_regmap_config = { .cache_type = REGCACHE_FLAT, }; +/* + * The AHUB HW modules are interconnected with CIF which are capable of + * supporting Channel and Sample bit format conversion. This needs different + * CIF Audio and client configuration. As one of the config comes from + * params_channels() or params_format(), the extra configuration is passed from + * CIF Port of DT I2S node which can help to perform this conversion. + * + * 4ch audio = 4ch client = 2ch 2ch + * -----> ADMAIF -----------> CIF -------------> I2S ----> + */ +static void tegra210_parse_client_convert(struct device *dev) +{ + struct tegra210_i2s *i2s = dev_get_drvdata(dev); + struct device_node *ports, *ep; + struct simple_util_data data = {}; + int cif_port = 0; + + ports = of_get_child_by_name(dev->of_node, "ports"); + if (ports) { + ep = of_graph_get_endpoint_by_regs(ports, cif_port, -1); + if (ep) { + simple_util_parse_convert(ep, NULL, &data); + of_node_put(ep); + } + of_node_put(ports); + } + + if (data.convert_channels) + i2s->client_channels = data.convert_channels; + + if (data.convert_sample_format) + i2s->client_sample_format = simple_util_get_sample_fmt(&data); +} + static int tegra210_i2s_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -887,6 +947,7 @@ static int tegra210_i2s_probe(struct platform_device *pdev) i2s->tx_mask = DEFAULT_I2S_SLOT_MASK; i2s->rx_mask = DEFAULT_I2S_SLOT_MASK; i2s->loopback = false; + i2s->client_sample_format = -EINVAL; dev_set_drvdata(dev, i2s); @@ -916,6 +977,8 @@ static int tegra210_i2s_probe(struct platform_device *pdev) return PTR_ERR(i2s->regmap); } + tegra210_parse_client_convert(dev); + regcache_cache_only(i2s->regmap, true); err = devm_snd_soc_register_component(dev, &tegra210_i2s_cmpnt, diff --git a/sound/soc/tegra/tegra210_i2s.h b/sound/soc/tegra/tegra210_i2s.h index 030d70c45e18..fe478f3d8435 100644 --- a/sound/soc/tegra/tegra210_i2s.h +++ b/sound/soc/tegra/tegra210_i2s.h @@ -112,6 +112,8 @@ struct tegra210_i2s { struct clk *clk_i2s; struct clk *clk_sync_input; struct regmap *regmap; + int client_sample_format; + unsigned int client_channels; unsigned int stereo_to_mono[I2S_PATHS]; unsigned int mono_to_stereo[I2S_PATHS]; unsigned int dai_fmt;