diff mbox series

thermal: adding check if the thermal firmware is running

Message ID 20240517141655.2797-1-trintaeoitogc@gmail.com
State Superseded
Headers show
Series thermal: adding check if the thermal firmware is running | expand

Commit Message

Guilherme Giacomo Simoes May 17, 2024, 2:16 p.m. UTC
In the dmesg is showing the message "failed to read out thermal zone"
as if the temperature read is failed by don't find the thermal zone.

After researching and debugging, I see that this specific error is
occurrenced because the thermal try read the temperature when is started,
but the firmware is not running yet.

For more legibiliti i change the tt.c for return EAGAIN when this was occurrence.
After this change, in my computer I compile and install kernel in /boot
and in my dmesg the message "failed to read out thermal zone" is not show
any more.

I would like to thanks for Rafael Wysocki <refael.j.wysocki@intel.com> for
your suggestions in mu first patch that results in this another patch.
---
 drivers/net/wireless/intel/iwlwifi/mvm/tt.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
index 8083c4b2ab6b..68ab9966330c 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
@@ -620,8 +620,14 @@  static int iwl_mvm_tzone_get_temp(struct thermal_zone_device *device,
 
 	mutex_lock(&mvm->mutex);
 
-	if (!iwl_mvm_firmware_running(mvm) ||
-	    mvm->fwrt.cur_fw_img != IWL_UCODE_REGULAR) {
+	const int res = iwl_mvm_firmware_running(mvm);
+
+	if (!res) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	if (mvm->fwrt.cur_fw_img != IWL_UCODE_REGULAR) {
 		ret = -ENODATA;
 		goto out;
 	}