diff mbox series

[v1,1/3] dt-bindings: serial: snps-dw-apb-uart: Add one more reset signal for StarFive JH7110 SoC

Message ID 20240517061713.95803-2-hal.feng@starfivetech.com
State Superseded
Headers show
Series Add the core reset for UARTs of StarFive JH7110 | expand

Commit Message

Hal Feng May 17, 2024, 6:17 a.m. UTC
The UART of StarFive JH7110 has two reset signals.
Both of them are necessary for JH7110 to initialize UART.

Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
 .../bindings/serial/snps-dw-apb-uart.yaml          | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

Comments

Conor Dooley May 17, 2024, 4:16 p.m. UTC | #1
On Fri, May 17, 2024 at 02:17:11PM +0800, Hal Feng wrote:
> The UART of StarFive JH7110 has two reset signals.
> Both of them are necessary for JH7110 to initialize UART.
> 
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> ---
>  .../bindings/serial/snps-dw-apb-uart.yaml          | 14 +++++++++++++-
>  1 file changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
> index 1001d2a6ace8..a6396c5cbfb1 100644
> --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
> @@ -13,6 +13,16 @@ allOf:
>    - $ref: serial.yaml#
>    - $ref: rs485.yaml#
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: starfive,jh7110-uart
> +    then:
> +      properties:
> +        resets:
> +          minItems: 2

else:
  properties:
    resets:
      maxItems: 1

Thanks,
Conor.

> +
>  properties:
>    compatible:
>      oneOf:
> @@ -48,6 +58,7 @@ properties:
>            - enum:
>                - starfive,jh7100-hsuart
>                - starfive,jh7100-uart
> +              - starfive,jh7110-uart
>            - const: snps,dw-apb-uart
>        - const: snps,dw-apb-uart
>  
> @@ -82,7 +93,8 @@ properties:
>      type: boolean
>  
>    resets:
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 2
>  
>    reg-shift: true
>  
> -- 
> 2.43.2
> 
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Hal Feng May 20, 2024, 2:06 a.m. UTC | #2
> On 18.05.24 00:17, Conor Dooley wrote: 
> On Fri, May 17, 2024 at 02:17:11PM +0800, Hal Feng wrote:
> > The UART of StarFive JH7110 has two reset signals.
> > Both of them are necessary for JH7110 to initialize UART.
> >
> > Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> > ---
> >  .../bindings/serial/snps-dw-apb-uart.yaml          | 14 +++++++++++++-
> >  1 file changed, 13 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
> b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
> > index 1001d2a6ace8..a6396c5cbfb1 100644
> > --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
> > +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
> > @@ -13,6 +13,16 @@ allOf:
> >    - $ref: serial.yaml#
> >    - $ref: rs485.yaml#
> >
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: starfive,jh7110-uart
> > +    then:
> > +      properties:
> > +        resets:
> > +          minItems: 2
> 
> else:
>   properties:
>     resets:
>       maxItems: 1

Will fix it later. Thanks for your review.

Best regards,
Hal
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
index 1001d2a6ace8..a6396c5cbfb1 100644
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -13,6 +13,16 @@  allOf:
   - $ref: serial.yaml#
   - $ref: rs485.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7110-uart
+    then:
+      properties:
+        resets:
+          minItems: 2
+
 properties:
   compatible:
     oneOf:
@@ -48,6 +58,7 @@  properties:
           - enum:
               - starfive,jh7100-hsuart
               - starfive,jh7100-uart
+              - starfive,jh7110-uart
           - const: snps,dw-apb-uart
       - const: snps,dw-apb-uart
 
@@ -82,7 +93,8 @@  properties:
     type: boolean
 
   resets:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   reg-shift: true