diff mbox series

[v1,3/3] Bluetooth: btnxpuart: Handle FW Download Abort scenario

Message ID 20240515070657.85132-4-neeraj.sanjaykale@nxp.com
State Accepted
Commit 813da00098fd0a064b11a161c30eb0d80172979e
Headers show
Series Enable status prints for firmware download | expand

Commit Message

Neeraj Sanjay Kale May 15, 2024, 7:06 a.m. UTC
This adds a new flag BTNXPUART_FW_DOWNLOAD_ABORT which handles the
situation where driver is removed while firmware download is in
progress.

logs:
modprobe btnxpuart
[65239.230431] Bluetooth: hci0: ChipID: 7601, Version: 0
[65239.236670] Bluetooth: hci0: Request Firmware: nxp/uartspi_n61x_v1.bin.se
rmmod btnxpuart
[65241.425300] Bluetooth: hci0: FW Download Aborted

Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Tested-by: Guillaume Legoupil <guillaume.legoupil@nxp.com>
---
 drivers/bluetooth/btnxpuart.c | 47 ++++++++++++++++++++++++-----------
 1 file changed, 33 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index c22f2ad7d751..97d0f6f089e8 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -29,6 +29,7 @@ 
 #define BTNXPUART_CHECK_BOOT_SIGNATURE	3
 #define BTNXPUART_SERDEV_OPEN		4
 #define BTNXPUART_IR_IN_PROGRESS	5
+#define BTNXPUART_FW_DOWNLOAD_ABORT	6
 
 /* NXP HW err codes */
 #define BTNXPUART_IR_HW_ERR		0xb0
@@ -159,6 +160,7 @@  struct btnxpuart_dev {
 	u8 fw_name[MAX_FW_FILE_NAME_LEN];
 	u32 fw_dnld_v1_offset;
 	u32 fw_v1_sent_bytes;
+	u32 fw_dnld_v3_offset;
 	u32 fw_v3_offset_correction;
 	u32 fw_v1_expected_len;
 	u32 boot_reg_offset;
@@ -550,6 +552,7 @@  static int nxp_download_firmware(struct hci_dev *hdev)
 	nxpdev->fw_v1_sent_bytes = 0;
 	nxpdev->fw_v1_expected_len = HDR_LEN;
 	nxpdev->boot_reg_offset = 0;
+	nxpdev->fw_dnld_v3_offset = 0;
 	nxpdev->fw_v3_offset_correction = 0;
 	nxpdev->baudrate_changed = false;
 	nxpdev->timeout_changed = false;
@@ -564,14 +567,23 @@  static int nxp_download_firmware(struct hci_dev *hdev)
 					       !test_bit(BTNXPUART_FW_DOWNLOADING,
 							 &nxpdev->tx_state),
 					       msecs_to_jiffies(60000));
+
+	release_firmware(nxpdev->fw);
+	memset(nxpdev->fw_name, 0, sizeof(nxpdev->fw_name));
+
 	if (err == 0) {
-		bt_dev_err(hdev, "FW Download Timeout.");
+		bt_dev_err(hdev, "FW Download Timeout. offset: %d",
+				nxpdev->fw_dnld_v1_offset ?
+				nxpdev->fw_dnld_v1_offset :
+				nxpdev->fw_dnld_v3_offset);
 		return -ETIMEDOUT;
 	}
+	if (test_bit(BTNXPUART_FW_DOWNLOAD_ABORT, &nxpdev->tx_state)) {
+		bt_dev_err(hdev, "FW Download Aborted");
+		return -EINTR;
+	}
 
 	serdev_device_set_flow_control(nxpdev->serdev, true);
-	release_firmware(nxpdev->fw);
-	memset(nxpdev->fw_name, 0, sizeof(nxpdev->fw_name));
 
 	/* Allow the downloaded FW to initialize */
 	msleep(1200);
@@ -955,8 +967,9 @@  static int nxp_recv_fw_req_v3(struct hci_dev *hdev, struct sk_buff *skb)
 		goto free_skb;
 	}
 
-	serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data + offset -
-				nxpdev->fw_v3_offset_correction, len);
+	nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction;
+	serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data +
+				nxpdev->fw_dnld_v3_offset, len);
 
 free_skb:
 	kfree_skb(skb);
@@ -1390,16 +1403,22 @@  static void nxp_serdev_remove(struct serdev_device *serdev)
 	struct btnxpuart_dev *nxpdev = serdev_device_get_drvdata(serdev);
 	struct hci_dev *hdev = nxpdev->hdev;
 
-	/* Restore FW baudrate to fw_init_baudrate if changed.
-	 * This will ensure FW baudrate is in sync with
-	 * driver baudrate in case this driver is re-inserted.
-	 */
-	if (nxpdev->current_baudrate != nxpdev->fw_init_baudrate) {
-		nxpdev->new_baudrate = nxpdev->fw_init_baudrate;
-		nxp_set_baudrate_cmd(hdev, NULL);
+	if (is_fw_downloading(nxpdev)) {
+		set_bit(BTNXPUART_FW_DOWNLOAD_ABORT, &nxpdev->tx_state);
+		clear_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state);
+		wake_up_interruptible(&nxpdev->check_boot_sign_wait_q);
+		wake_up_interruptible(&nxpdev->fw_dnld_done_wait_q);
+	} else {
+		/* Restore FW baudrate to fw_init_baudrate if changed.
+		 * This will ensure FW baudrate is in sync with
+		 * driver baudrate in case this driver is re-inserted.
+		 */
+		if (nxpdev->current_baudrate != nxpdev->fw_init_baudrate) {
+			nxpdev->new_baudrate = nxpdev->fw_init_baudrate;
+			nxp_set_baudrate_cmd(hdev, NULL);
+		}
+		ps_cancel_timer(nxpdev);
 	}
-
-	ps_cancel_timer(nxpdev);
 	hci_unregister_dev(hdev);
 	hci_free_dev(hdev);
 }