@@ -19,116 +19,142 @@ properties:
const: qcom,pm8008
reg:
- description:
- I2C slave address.
-
maxItems: 1
interrupts:
maxItems: 1
- description: Parent interrupt.
-
reset-gpios:
maxItems: 1
- "#interrupt-cells":
+ vdd_l1_l2-supply: true
+ vdd_l3_l4-supply: true
+ vdd_l5-supply: true
+ vdd_l6-supply: true
+ vdd_l7-supply: true
+
+ gpio-controller: true
+
+ "#gpio-cells":
const: 2
- description: |
- The first cell is the IRQ number, the second cell is the IRQ trigger
- flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h.
+ gpio-ranges:
+ maxItems: 1
interrupt-controller: true
- "#address-cells":
- const: 1
+ "#interrupt-cells":
+ const: 2
- "#size-cells":
+ "#thermal-sensor-cells":
const: 0
-patternProperties:
- "^gpio@[0-9a-f]+$":
+ pinctrl:
type: object
+ additionalProperties: false
+ patternProperties:
+ "-state$":
+ type: object
+ $ref: "#/$defs/qcom-pm8008-pinctrl-state"
+ unevaluatedProperties: false
- description: |
- The GPIO peripheral. This node may be specified twice, one for each GPIO.
-
- properties:
- compatible:
- items:
- - const: qcom,pm8008-gpio
- - const: qcom,spmi-gpio
+ regulators:
+ type: object
+ additionalProperties: false
+ patternProperties:
+ "^ldo[1-7]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
- reg:
- description: Peripheral address of one of the two GPIO peripherals.
- maxItems: 1
+required:
+ - compatible
+ - reg
+ - interrupts
+ - vdd_l1_l2-supply
+ - vdd_l3_l4-supply
+ - vdd_l5-supply
+ - vdd_l6-supply
+ - vdd_l7-supply
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+ - interrupt-controller
+ - "#interrupt-cells"
+ - "#thermal-sensor-cells"
- gpio-controller: true
+additionalProperties: false
- gpio-ranges:
- maxItems: 1
+$defs:
+ qcom-pm8008-pinctrl-state:
+ type: object
- interrupt-controller: true
+ allOf:
+ - $ref: /schemas/pinctrl/pinmux-node.yaml
+ - $ref: /schemas/pinctrl/pincfg-node.yaml
- "#interrupt-cells":
- const: 2
+ properties:
+ pins:
+ items:
+ pattern: "^gpio[12]$"
- "#gpio-cells":
- const: 2
+ function:
+ items:
+ - enum:
+ - normal
required:
- - compatible
- - reg
- - gpio-controller
- - interrupt-controller
- - "#gpio-cells"
- - gpio-ranges
- - "#interrupt-cells"
+ - pins
+ - function
additionalProperties: false
-required:
- - compatible
- - reg
- - interrupts
- - "#address-cells"
- - "#size-cells"
- - "#interrupt-cells"
-
-additionalProperties: false
-
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/mfd/qcom-pm8008.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
- pmic@8 {
+ pm8008: pmic@8 {
compatible = "qcom,pm8008";
reg = <0x8>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <2>;
interrupt-parent = <&tlmm>;
interrupts = <32 IRQ_TYPE_EDGE_RISING>;
reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
- pm8008_gpios: gpio@c000 {
- compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
- reg = <0xc000>;
- gpio-controller;
- gpio-ranges = <&pm8008_gpios 0 0 2>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ vdd_l1_l2-supply = <&vreg_s8b_1p2>;
+ vdd_l3_l4-supply = <&vreg_s1b_1p8>;
+ vdd_l5-supply = <&vreg_bob>;
+ vdd_l6-supply = <&vreg_bob>;
+ vdd_l7-supply = <&vreg_bob>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8008 0 0 2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ #thermal-sensor-cells = <0>;
+
+ pinctrl {
+ gpio-keys-state {
+ pins = "gpio1";
+ function = "normal";
+ };
+ };
+
+ regulators {
+ ldo1 {
+ regulator-name = "vreg_l1";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ };
};
};
};
Rework the pm8008 binding by dropping internal details like register offsets and interrupts and by adding the missing regulator and temperature alarm properties. Note that child nodes are still used for pinctrl and regulator configuration. Also note that the pinctrl state definition will be extended later and could eventually also be shared with other PMICs (e.g. by breaking out bits of qcom,pmic-gpio.yaml). Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- .../devicetree/bindings/mfd/qcom,pm8008.yaml | 154 ++++++++++-------- 1 file changed, 90 insertions(+), 64 deletions(-)