| Message ID | 20240507195116.9464-27-quic_wcheng@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Introduce QC USB SND audio offloading support | expand |
Hi Pierre, On 5/7/2024 2:23 PM, Pierre-Louis Bossart wrote: > >> @@ -113,6 +120,12 @@ static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb, >> if (connected) { >> /* We only track the latest USB headset plugged in */ >> data->active_usb_chip_idx = sdev->card_idx; >> + >> + set_bit(sdev->card_idx, &data->available_card_slot); >> + data->status[sdev->card_idx].sdev = sdev; > > Not following the 'only track the latest USB headset plugged in', I > don't see anything that discard the previously latest headset... > > If you plug headset1, then headset2, how is headset1 marked as not > available for USB offload? > It won't mark headset1 as not available for offload, because offload could happen on either depending on what is selected (from the kcontrol as well). Thanks Wesley Cheng
On 5/8/24 18:57, Wesley Cheng wrote: > Hi Pierre, > > On 5/7/2024 2:23 PM, Pierre-Louis Bossart wrote: >> >>> @@ -113,6 +120,12 @@ static int q6usb_alsa_connection_cb(struct >>> snd_soc_usb *usb, >>> if (connected) { >>> /* We only track the latest USB headset plugged in */ >>> data->active_usb_chip_idx = sdev->card_idx; >>> + >>> + set_bit(sdev->card_idx, &data->available_card_slot); >>> + data->status[sdev->card_idx].sdev = sdev; >> >> Not following the 'only track the latest USB headset plugged in', I >> don't see anything that discard the previously latest headset... >> >> If you plug headset1, then headset2, how is headset1 marked as not >> available for USB offload? >> > > It won't mark headset1 as not available for offload, because offload > could happen on either depending on what is selected (from the kcontrol > as well). Right, so the wording 'only track the latest USB headset plugged in' is incorrect or obsolete, isn't it?
Hi Pierre, On 5/9/2024 6:02 AM, Pierre-Louis Bossart wrote: > > > On 5/8/24 18:57, Wesley Cheng wrote: >> Hi Pierre, >> >> On 5/7/2024 2:23 PM, Pierre-Louis Bossart wrote: >>> >>>> @@ -113,6 +120,12 @@ static int q6usb_alsa_connection_cb(struct >>>> snd_soc_usb *usb, >>>> if (connected) { >>>> /* We only track the latest USB headset plugged in */ >>>> data->active_usb_chip_idx = sdev->card_idx; >>>> + >>>> + set_bit(sdev->card_idx, &data->available_card_slot); >>>> + data->status[sdev->card_idx].sdev = sdev; >>> >>> Not following the 'only track the latest USB headset plugged in', I >>> don't see anything that discard the previously latest headset... >>> >>> If you plug headset1, then headset2, how is headset1 marked as not >>> available for USB offload? >>> >> >> It won't mark headset1 as not available for offload, because offload >> could happen on either depending on what is selected (from the kcontrol >> as well). > > Right, so the wording 'only track the latest USB headset plugged in' is > incorrect or obsolete, isn't it? Sure, I can reword it. Will specify that it "selects the latest USB headset plugged in for offloading" Thanks Wesley Cheng
diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c index ee082d2fe786..1e85636bc6cb 100644 --- a/sound/soc/qcom/qdsp6/q6usb.c +++ b/sound/soc/qcom/qdsp6/q6usb.c @@ -27,11 +27,18 @@ #define Q6_USB_SID_MASK 0xF +struct q6usb_status { + struct snd_soc_usb_device *sdev; + unsigned int pcm_index; +}; + struct q6usb_port_data { struct q6afe_usb_cfg usb_cfg; struct snd_soc_usb *usb; struct q6usb_offload priv; int active_usb_chip_idx; + unsigned long available_card_slot; + struct q6usb_status status[SNDRV_CARDS]; }; static const struct snd_soc_dapm_widget q6usb_dai_widgets[] = { @@ -113,6 +120,12 @@ static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb, if (connected) { /* We only track the latest USB headset plugged in */ data->active_usb_chip_idx = sdev->card_idx; + + set_bit(sdev->card_idx, &data->available_card_slot); + data->status[sdev->card_idx].sdev = sdev; + } else { + clear_bit(sdev->card_idx, &data->available_card_slot); + data->status[sdev->card_idx].sdev = NULL; } return 0;
The USB backend should know about which sound resources are being shared between the ASoC and USB SND paths. This can be utilized to properly select and maintain the offloading devices. Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> --- sound/soc/qcom/qdsp6/q6usb.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)