@@ -553,6 +553,16 @@ config PWM_SL28CPLD
To compile this driver as a module, choose M here: the module
will be called pwm-sl28cpld.
+config PWM_SN3112
+ tristate "SI-EN SN3112 PWM driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Generic PWM framework driver for SI-EN SN3112 LED controller.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-sn3112.
+
config PWM_SPEAR
tristate "STMicroelectronics SPEAr PWM support"
depends on PLAT_SPEAR || COMPILE_TEST
@@ -50,6 +50,7 @@ obj-$(CONFIG_PWM_RZ_MTU3) += pwm-rz-mtu3.o
obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
obj-$(CONFIG_PWM_SIFIVE) += pwm-sifive.o
obj-$(CONFIG_PWM_SL28CPLD) += pwm-sl28cpld.o
+obj-$(CONFIG_PWM_SN3112) += pwm-sn3112.o
obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o
obj-$(CONFIG_PWM_SPRD) += pwm-sprd.o
obj-$(CONFIG_PWM_STI) += pwm-sti.o
new file mode 100644
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for SN3112 12-channel 8-bit PWM LED controller
+ *
+ * Copyright (c) 2024 Junhao Xie <bigfoot@classfun.cn>
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+#define SN3112_CHANNELS 12
+#define SN3112_REG_ENABLE 0x00
+#define SN3112_REG_PWM_VAL 0x04
+#define SN3112_REG_PWM_EN 0x13
+#define SN3112_REG_APPLY 0x16
+#define SN3112_REG_RESET 0x17
+
+struct sn3112 {
+ struct device *pdev;
+ struct regmap *regmap;
+ struct mutex lock;
+ struct regulator *vdd;
+ uint8_t pwm_val[SN3112_CHANNELS];
+ uint8_t pwm_en_reg[3];
+ bool pwm_en[SN3112_CHANNELS];
+#if IS_ENABLED(CONFIG_GPIOLIB)
+ struct gpio_desc *sdb;
+#endif
+};
+
+static int sn3112_write_reg(struct sn3112 *priv, unsigned int reg,
+ unsigned int val)
+{
+ int err;
+
+ dev_dbg(priv->pdev, "request regmap_write 0x%x 0x%x\n", reg, val);
+ err = regmap_write(priv->regmap, reg, val);
+ if (err)
+ dev_warn_ratelimited(
+ priv->pdev,
+ "regmap_write to register 0x%x failed: %pe\n", reg,
+ ERR_PTR(err));
+
+ return err;
+}
+
+static int sn3112_set_en_reg(struct sn3112 *priv, unsigned int channel,
+ bool enabled, bool write)
+{
+ unsigned int reg, bit;
+
+ if (channel >= SN3112_CHANNELS)
+ return -EINVAL;
+
+ /* LED_EN1: BIT5:BIT3 = OUT3:OUT1 */
+ if (channel >= 0 && channel <= 2)
+ reg = 0, bit = channel + 3;
+ /* LED_EN2: BIT5:BIT0 = OUT9:OUT4 */
+ else if (channel >= 3 && channel <= 8)
+ reg = 1, bit = channel - 3;
+ /* LED_EN3: BIT2:BIT0 = OUT12:OUT10 */
+ else if (channel >= 9 && channel <= 11)
+ reg = 2, bit = channel - 9;
+ else
+ return -EINVAL;
+
+ dev_dbg(priv->pdev, "channel %u enabled %u\n", channel, enabled);
+ dev_dbg(priv->pdev, "reg %u bit %u\n", reg, bit);
+ if (enabled)
+ set_bit(bit, (ulong *)&priv->pwm_en_reg[reg]);
+ else
+ clear_bit(bit, (ulong *)&priv->pwm_en_reg[reg]);
+ dev_dbg(priv->pdev, "set enable reg %u to %u\n", reg,
+ priv->pwm_en_reg[reg]);
+
+ if (!write)
+ return 0;
+ return sn3112_write_reg(priv, SN3112_REG_PWM_EN + reg,
+ priv->pwm_en_reg[reg]);
+}
+
+static int sn3112_set_val_reg(struct sn3112 *priv, unsigned int channel,
+ uint8_t val, bool write)
+{
+ if (channel >= SN3112_CHANNELS)
+ return -EINVAL;
+ priv->pwm_val[channel] = val;
+ dev_dbg(priv->pdev, "set value reg %u to %u\n", channel,
+ priv->pwm_val[channel]);
+
+ if (!write)
+ return 0;
+ return sn3112_write_reg(priv, SN3112_REG_PWM_VAL + channel,
+ priv->pwm_val[channel]);
+}
+
+static int sn3112_write_all(struct sn3112 *priv)
+{
+ int i, ret;
+
+ /* regenerate enable register values */
+ for (i = 0; i < SN3112_CHANNELS; i++) {
+ ret = sn3112_set_en_reg(priv, i, priv->pwm_en[i], false);
+ if (ret != 0)
+ return ret;
+ }
+
+ /* use random value to clear all registers */
+ ret = sn3112_write_reg(priv, SN3112_REG_RESET, 0x66);
+ if (ret != 0)
+ return ret;
+
+ /* set software enable register */
+ ret = sn3112_write_reg(priv, SN3112_REG_ENABLE, 1);
+ if (ret != 0)
+ return ret;
+
+ /* rewrite pwm value register */
+ for (i = 0; i < SN3112_CHANNELS; i++) {
+ ret = sn3112_write_reg(priv, SN3112_REG_PWM_VAL + i,
+ priv->pwm_val[i]);
+ if (ret != 0)
+ return ret;
+ }
+
+ /* rewrite pwm enable register */
+ for (i = 0; i < 3; i++) {
+ ret = sn3112_write_reg(priv, SN3112_REG_PWM_EN + i,
+ priv->pwm_en_reg[i]);
+ if (ret != 0)
+ return ret;
+ }
+
+ /* use random value to apply changes */
+ ret = sn3112_write_reg(priv, SN3112_REG_APPLY, 0x66);
+ if (ret != 0)
+ return ret;
+
+ dev_dbg(priv->pdev, "reinitialized\n");
+ return 0;
+}
+
+static int sn3112_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct sn3112 *priv = pwmchip_get_drvdata(chip);
+
+ if (pwm->hwpwm >= SN3112_CHANNELS)
+ return -EINVAL;
+
+ dev_dbg(priv->pdev, "sn3112 request channel %u\n", pwm->hwpwm);
+ pwm->args.period = 1000000;
+ return 0;
+}
+
+static int sn3112_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ u64 val = 0;
+ struct sn3112 *priv = pwmchip_get_drvdata(chip);
+
+ if (pwm->hwpwm >= SN3112_CHANNELS)
+ return -EINVAL;
+
+ if (state->polarity != PWM_POLARITY_NORMAL)
+ return -EINVAL;
+
+ if (state->period <= 0)
+ return -EINVAL;
+
+ val = mul_u64_u64_div_u64(state->duty_cycle, 0xff, state->period);
+ dev_dbg(priv->pdev, "duty_cycle %llu period %llu\n", state->duty_cycle,
+ state->period);
+ dev_dbg(priv->pdev, "set channel %u value to %llu\n", pwm->hwpwm, val);
+ dev_dbg(priv->pdev, "set channel %u enabled to %u\n", pwm->hwpwm,
+ state->enabled);
+
+ mutex_lock(&priv->lock);
+ sn3112_set_en_reg(priv, pwm->hwpwm, state->enabled, true);
+ sn3112_set_val_reg(priv, pwm->hwpwm, val, true);
+ sn3112_write_reg(priv, SN3112_REG_APPLY, 0x66);
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+static const struct pwm_ops sn3112_pwm_ops = {
+ .apply = sn3112_pwm_apply,
+ .request = sn3112_pwm_request,
+};
+
+static const struct regmap_config sn3112_regmap_i2c_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 24,
+ .cache_type = REGCACHE_NONE,
+};
+
+static int sn3112_pwm_probe(struct i2c_client *client)
+{
+ struct pwm_chip *chip;
+ struct sn3112 *priv;
+ int ret, i;
+
+ dev_dbg(&client->dev, "probing\n");
+ chip = devm_pwmchip_alloc(&client->dev, SN3112_CHANNELS, sizeof(*priv));
+ if (IS_ERR(chip))
+ return PTR_ERR(chip);
+ priv = pwmchip_get_drvdata(chip);
+ priv->pdev = &client->dev;
+
+ /* initialize sn3112 (chip does not support read command) */
+ for (i = 0; i < SN3112_CHANNELS; i++)
+ priv->pwm_en[i] = false;
+ for (i = 0; i < SN3112_CHANNELS; i++)
+ priv->pwm_val[i] = 0;
+ for (i = 0; i < 3; i++)
+ priv->pwm_en_reg[i] = 0;
+
+ /* enable sn5112 power vdd */
+ priv->vdd = devm_regulator_get(priv->pdev, "vdd");
+ if (IS_ERR(priv->vdd)) {
+ ret = PTR_ERR(priv->vdd);
+ dev_err(priv->pdev, "Unable to get vdd regulator: %d\n", ret);
+ return ret;
+ }
+
+#if IS_ENABLED(CONFIG_GPIOLIB)
+ /* sn5112 hardware shutdown pin */
+ priv->sdb = devm_gpiod_get_optional(priv->pdev, "sdb", GPIOD_OUT_LOW);
+ if (PTR_ERR(priv->sdb) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+#endif
+
+ /* enable sn5112 power vdd */
+ ret = regulator_enable(priv->vdd);
+ if (ret < 0) {
+ dev_err(priv->pdev, "Unable to enable regulator: %d\n", ret);
+ return ret;
+ }
+
+ priv->regmap = devm_regmap_init_i2c(client, &sn3112_regmap_i2c_config);
+ if (IS_ERR(priv->regmap)) {
+ ret = PTR_ERR(priv->regmap);
+ dev_err(priv->pdev, "Failed to initialize register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ i2c_set_clientdata(client, chip);
+ mutex_init(&priv->lock);
+
+ chip->ops = &sn3112_pwm_ops;
+ ret = pwmchip_add(chip);
+ if (ret < 0)
+ return ret;
+
+#if IS_ENABLED(CONFIG_GPIOLIB)
+ /* disable hardware shutdown pin */
+ if (priv->sdb)
+ gpiod_set_value(priv->sdb, 0);
+#endif
+
+ /* initialize registers */
+ ret = sn3112_write_all(priv);
+ if (ret != 0) {
+ dev_err(priv->pdev, "Failed to initialize sn3112: %d\n", ret);
+ return ret;
+ }
+
+ dev_info(&client->dev,
+ "Found SI-EN SN3112 12-channel 8-bit PWM LED controller\n");
+ return 0;
+}
+
+static void sn3112_pwm_remove(struct i2c_client *client)
+{
+ struct pwm_chip *chip = i2c_get_clientdata(client);
+ struct sn3112 *priv = pwmchip_get_drvdata(chip);
+
+ dev_dbg(priv->pdev, "remove\n");
+
+ /* set software enable register */
+ sn3112_write_reg(priv, SN3112_REG_ENABLE, 0);
+
+ /* use random value to apply changes */
+ sn3112_write_reg(priv, SN3112_REG_APPLY, 0x66);
+
+#if IS_ENABLED(CONFIG_GPIOLIB)
+ /* enable hardware shutdown pin */
+ if (priv->sdb)
+ gpiod_set_value(priv->sdb, 1);
+#endif
+
+ /* power-off sn5112 power vdd */
+ regulator_disable(priv->vdd);
+
+ pwmchip_remove(chip);
+}
+
+static const struct i2c_device_id sn3112_id[] = {
+ { "sn3112", 0 },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(i2c, sn3112_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id sn3112_dt_ids[] = {
+ { .compatible = "si-en,sn3112-pwm", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sn3112_dt_ids);
+#endif
+
+static struct i2c_driver sn3112_i2c_driver = {
+ .driver = {
+ .name = "sn3112-pwm",
+ .of_match_table = of_match_ptr(sn3112_dt_ids),
+ },
+ .probe = sn3112_pwm_probe,
+ .remove = sn3112_pwm_remove,
+ .id_table = sn3112_id,
+};
+
+module_i2c_driver(sn3112_i2c_driver);
+
+MODULE_AUTHOR("BigfootACA <bigfoot@classfun.cn>");
+MODULE_DESCRIPTION("PWM driver for SI-EN SN3112");
+MODULE_LICENSE("GPL");