@@ -1029,7 +1029,7 @@ config SERIAL_SC16IS7XX_CORE
select SERIAL_SC16IS7XX_SPI if SPI_MASTER
select SERIAL_SC16IS7XX_I2C if I2C
help
- Core driver for NXP SC16IS7xx UARTs.
+ Core driver for NXP SC16IS7xx and compatible UARTs.
Supported ICs are:
SC16IS740
@@ -1038,6 +1038,7 @@ config SERIAL_SC16IS7XX_CORE
SC16IS752
SC16IS760
SC16IS762
+ XR20M1172 (Exar)
The driver supports both I2C and SPI interfaces.
@@ -10,6 +10,7 @@
#undef DEFAULT_SYMBOL_NAMESPACE
#define DEFAULT_SYMBOL_NAMESPACE SERIAL_NXP_SC16IS7XX
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
@@ -68,6 +69,7 @@
/* Special Register set: Only if ((LCR[7] == 1) && (LCR != 0xBF)) */
#define SC16IS7XX_DLL_REG (0x00) /* Divisor Latch Low */
#define SC16IS7XX_DLH_REG (0x01) /* Divisor Latch High */
+#define XR20M117X_DLD_REG (0x02) /* Divisor Fractional Register */
/* Enhanced Register set: Only if (LCR == 0xBF) */
#define SC16IS7XX_EFR_REG (0x02) /* Enhanced Features */
@@ -221,6 +223,20 @@
#define SC16IS7XX_TCR_RX_HALT(words) ((((words) / 4) & 0x0f) << 0)
#define SC16IS7XX_TCR_RX_RESUME(words) ((((words) / 4) & 0x0f) << 4)
+/*
+ * Divisor Fractional Register bits (EXAR extension).
+ * EXAR hardware is mostly compatible with SC16IS7XX, but supports additional feature:
+ * 4x and 8x divisor, instead of default 16x. It has a special register to program it.
+ * Bits 0 to 3 is fractional divisor, it used to set value of last 16 bits of
+ * uartclk * (16 / divisor) / baud, in case of default it will be uartclk / baud.
+ * Bits 4 and 5 used as switches, and should not be set to 1 simultaneously.
+ */
+
+#define XR20M117X_DLD_16X 0
+#define XR20M117X_DLD_DIV_MASK GENMASK(3, 0)
+#define XR20M117X_DLD_8X BIT(4)
+#define XR20M117X_DLD_4X BIT(5)
+
/*
* TLR register bits
* If TLR[3:0] or TLR[7:4] are logical 0, the selectable trigger levels via the
@@ -523,6 +539,13 @@ const struct sc16is7xx_devtype sc16is762_devtype = {
};
EXPORT_SYMBOL_GPL(sc16is762_devtype);
+static const struct sc16is7xx_devtype xr20m1172_devtype = {
+ .name = "XR20M1172",
+ .nr_gpio = 8,
+ .nr_uart = 2,
+};
+EXPORT_SYMBOL_GPL(sc16is762_devtype);
+
static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg)
{
switch (reg) {
@@ -555,18 +578,43 @@ static bool sc16is7xx_regmap_noinc(struct device *dev, unsigned int reg)
return reg == SC16IS7XX_RHR_REG;
}
+static bool sc16is7xx_has_dld(struct device *dev)
+{
+ struct sc16is7xx_port *s = dev_get_drvdata(dev);
+
+ if (s->devtype == &xr20m1172_devtype)
+ return true;
+ return false;
+}
+
static int sc16is7xx_set_baud(struct uart_port *port, int baud)
{
struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
- u8 lcr;
+ unsigned long clk = port->uartclk, div, div16;
+ bool has_dld = sc16is7xx_has_dld(port->dev);
+ u8 dld_mode = XR20M117X_DLD_16X;
u8 prescaler = 0;
- unsigned long clk = port->uartclk, div = clk / 16 / baud;
+ u8 divisor = 16;
+ u8 lcr;
+
+ if (has_dld && DIV_ROUND_CLOSEST(clk, baud) < 16)
+ divisor = rounddown_pow_of_two(DIV_ROUND_CLOSEST(clk, baud));
+
+ div16 = (clk * 16) / divisor / baud;
+ div = div16 / 16;
if (div >= BIT(16)) {
prescaler = SC16IS7XX_MCR_CLKSEL_BIT;
div /= 4;
}
+ /* Count additional divisor for EXAR devices */
+ if (divisor == 8)
+ dld_mode = XR20M117X_DLD_8X;
+ if (divisor == 4)
+ dld_mode = XR20M117X_DLD_4X;
+ dld_mode |= FIELD_PREP(XR20M117X_DLD_DIV_MASK, div16);
+
/* Enable enhanced features */
sc16is7xx_efr_lock(port);
sc16is7xx_port_update(port, SC16IS7XX_EFR_REG,
@@ -587,12 +635,14 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud)
regcache_cache_bypass(one->regmap, true);
sc16is7xx_port_write(port, SC16IS7XX_DLH_REG, div / 256);
sc16is7xx_port_write(port, SC16IS7XX_DLL_REG, div % 256);
+ if (has_dld)
+ sc16is7xx_port_write(port, XR20M117X_DLD_REG, dld_mode);
regcache_cache_bypass(one->regmap, false);
/* Restore LCR and access to general register set */
sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
- return DIV_ROUND_CLOSEST(clk / 16, div);
+ return DIV_ROUND_CLOSEST(clk / divisor, div);
}
static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen,
@@ -1002,6 +1052,8 @@ static void sc16is7xx_set_termios(struct uart_port *port,
const struct ktermios *old)
{
struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+ bool has_dld = sc16is7xx_has_dld(port->dev);
+ u8 divisor = has_dld ? 4 : 16
unsigned int lcr, flow = 0;
int baud;
unsigned long flags;
@@ -1084,7 +1136,7 @@ static void sc16is7xx_set_termios(struct uart_port *port,
/* Get baud rate generator configuration */
baud = uart_get_baud_rate(port, termios, old,
port->uartclk / 16 / 4 / 0xffff,
- port->uartclk / 16);
+ port->uartclk / divisor);
/* Setup baudrate generator */
baud = sc16is7xx_set_baud(port, baud);
@@ -1684,6 +1736,7 @@ void sc16is7xx_remove(struct device *dev)
EXPORT_SYMBOL_GPL(sc16is7xx_remove);
const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = {
+ { .compatible = "exar,xr20m1172", .data = &xr20m1172_devtype, },
{ .compatible = "nxp,sc16is740", .data = &sc16is74x_devtype, },
{ .compatible = "nxp,sc16is741", .data = &sc16is74x_devtype, },
{ .compatible = "nxp,sc16is750", .data = &sc16is750_devtype, },
@@ -46,6 +46,7 @@ static const struct i2c_device_id sc16is7xx_i2c_id_table[] = {
{ "sc16is752", (kernel_ulong_t)&sc16is752_devtype, },
{ "sc16is760", (kernel_ulong_t)&sc16is760_devtype, },
{ "sc16is762", (kernel_ulong_t)&sc16is762_devtype, },
+ { "xr20m1172", (kernel_ulong_t)&xr20m1172_devtype, },
{ }
};
MODULE_DEVICE_TABLE(i2c, sc16is7xx_i2c_id_table);
@@ -69,6 +69,7 @@ static const struct spi_device_id sc16is7xx_spi_id_table[] = {
{ "sc16is752", (kernel_ulong_t)&sc16is752_devtype, },
{ "sc16is760", (kernel_ulong_t)&sc16is760_devtype, },
{ "sc16is762", (kernel_ulong_t)&sc16is762_devtype, },
+ { "xr20m1172", (kernel_ulong_t)&xr20m1172_devtype, },
{ }
};
MODULE_DEVICE_TABLE(spi, sc16is7xx_spi_id_table);