@@ -153,6 +153,12 @@ sdhci_clk: sdhci-clock {
#clock-cells = <0>;
};
+ i2c_ic_clk: i2c-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
interrupt-parent = <&plic>;
@@ -258,6 +264,36 @@ portc: gpio-controller@0 {
};
};
+ i2c0: i2c@ffe7f20000 {
+ compatible = "thead,th1520-i2c", "snps,designware-i2c";
+ reg = <0xff 0xe7f20000 0x0 0x4000>;
+ interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c_ic_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffe7f24000 {
+ compatible = "thead,th1520-i2c", "snps,designware-i2c";
+ reg = <0xff 0xe7f24000 0x0 0x4000>;
+ interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c_ic_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@ffe7f28000 {
+ compatible = "thead,th1520-i2c", "snps,designware-i2c";
+ reg = <0xff 0xe7f28000 0x0 0x4000>;
+ interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c_ic_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gpio3: gpio@ffe7f38000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xe7f38000 0x0 0x1000>;
@@ -312,6 +348,16 @@ portb: gpio-controller@0 {
};
};
+ i2c2: i2c@ffec00c000 {
+ compatible = "thead,th1520-i2c", "snps,designware-i2c";
+ reg = <0xff 0xec00c000 0x0 0x4000>;
+ interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c_ic_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart2: serial@ffec010000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xec010000 0x0 0x4000>;
@@ -322,6 +368,16 @@ uart2: serial@ffec010000 {
status = "disabled";
};
+ i2c3: i2c@ffec014000 {
+ compatible = "thead,th1520-i2c", "snps,designware-i2c";
+ reg = <0xff 0xec014000 0x0 0x4000>;
+ interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c_ic_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
dmac0: dma-controller@ffefc00000 {
compatible = "snps,axi-dma-1.01a";
reg = <0xff 0xefc00000 0x0 0x1000>;
@@ -394,6 +450,16 @@ uart5: serial@fff7f0c000 {
status = "disabled";
};
+ i2c5: i2c@fff7f2c000 {
+ compatible = "thead,th1520-i2c", "snps,designware-i2c";
+ reg = <0xff 0xf7f2c000 0x0 0x4000>;
+ interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c_ic_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
timer4: timer@ffffc33000 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc33000 0x0 0x14>;
Add nodes for the five I2C on the T-Head TH1520 RISCV SoC. All the I2C nodes are fed with the same clock named i2c_ic_clk. As there is currently no clock support, the i2c_ic_clk is exposed through a fixed-clock to mimic the existing nodes. Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com> --- arch/riscv/boot/dts/thead/th1520.dtsi | 66 +++++++++++++++++++++++++++ 1 file changed, 66 insertions(+)