diff mbox series

[6/6] arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset

Message ID 20240423134611.31979-7-johan+linaro@kernel.org
State Superseded
Headers show
Series HID/arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on | expand

Commit Message

Johan Hovold April 23, 2024, 1:46 p.m. UTC 
The touch controller reset line is currently not described by the
devicetree except in the pin configuration which is used to deassert
reset.

As the reset line has an external pull up to an always-on rail there is
no need to drive the pin high so just leave it configured as an input
and disable the internal pull down.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 08b3627049bc..68e70c983c94 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -1014,8 +1014,7 @@  int-n-pins {
 		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
-			output-high;
-			drive-strength = <16>;
+			bias-disable;
 		};
 	};