diff mbox

[1/3,v2] mmc: mmci: clean up header defines

Message ID 1477386367-18514-1-git-send-email-linus.walleij@linaro.org
State New
Headers show

Commit Message

Linus Walleij Oct. 25, 2016, 9:06 a.m. UTC 
There was some confusion in the CPSM (Command Path State Machine)
and DPSM (Data Path State Machine) regarding the naming of the
registers, clarify the meaning of this acronym so the naming is
understandable, and consistently use BIT() to define these fields.

Consequently name the register bit defines MCI_[C|D]PSM_* and
adjust the driver as well.

Include new definitions for a few bits found in a patch from
Srinivas Kandagatla.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
ChangeLog v1->v2:
- Use more consequent register naming.
---
 drivers/mmc/host/mmci.c | 16 ++++++------
 drivers/mmc/host/mmci.h | 69 +++++++++++++++++++++++++++----------------------
 2 files changed, 46 insertions(+), 39 deletions(-)

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index df990bb8c873..6a8ea9c633d4 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -137,7 +137,7 @@  static struct variant_data variant_u300 = {
 	.clkreg_enable		= MCI_ST_U300_HWFCEN,
 	.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
 	.datalength_bits	= 16,
-	.datactrl_mask_sdio	= MCI_ST_DPSM_SDIOEN,
+	.datactrl_mask_sdio	= MCI_DPSM_ST_SDIOEN,
 	.st_sdio			= true,
 	.pwrreg_powerup		= MCI_PWR_ON,
 	.f_max			= 100000000,
@@ -152,7 +152,7 @@  static struct variant_data variant_nomadik = {
 	.clkreg			= MCI_CLK_ENABLE,
 	.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
 	.datalength_bits	= 24,
-	.datactrl_mask_sdio	= MCI_ST_DPSM_SDIOEN,
+	.datactrl_mask_sdio	= MCI_DPSM_ST_SDIOEN,
 	.st_sdio		= true,
 	.st_clkdiv		= true,
 	.pwrreg_powerup		= MCI_PWR_ON,
@@ -170,7 +170,7 @@  static struct variant_data variant_ux500 = {
 	.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
 	.clkreg_neg_edge_enable	= MCI_ST_UX500_NEG_EDGE,
 	.datalength_bits	= 24,
-	.datactrl_mask_sdio	= MCI_ST_DPSM_SDIOEN,
+	.datactrl_mask_sdio	= MCI_DPSM_ST_SDIOEN,
 	.st_sdio		= true,
 	.st_clkdiv		= true,
 	.pwrreg_powerup		= MCI_PWR_ON,
@@ -188,9 +188,9 @@  static struct variant_data variant_ux500v2 = {
 	.clkreg_enable		= MCI_ST_UX500_HWFCEN,
 	.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
 	.clkreg_neg_edge_enable	= MCI_ST_UX500_NEG_EDGE,
-	.datactrl_mask_ddrmode	= MCI_ST_DPSM_DDRMODE,
+	.datactrl_mask_ddrmode	= MCI_DPSM_ST_DDRMODE,
 	.datalength_bits	= 24,
-	.datactrl_mask_sdio	= MCI_ST_DPSM_SDIOEN,
+	.datactrl_mask_sdio	= MCI_DPSM_ST_SDIOEN,
 	.st_sdio		= true,
 	.st_clkdiv		= true,
 	.blksz_datactrl16	= true,
@@ -210,7 +210,7 @@  static struct variant_data variant_qcom = {
 				  MCI_QCOM_CLK_SELECT_IN_FBCLK,
 	.clkreg_8bit_bus_enable = MCI_QCOM_CLK_WIDEBUS_8,
 	.datactrl_mask_ddrmode	= MCI_QCOM_CLK_SELECT_IN_DDR_MODE,
-	.data_cmd_enable	= MCI_QCOM_CSPM_DATCMD,
+	.data_cmd_enable	= MCI_CPSM_QCOM_DATCMD,
 	.blksz_datactrl4	= true,
 	.datalength_bits	= 24,
 	.pwrreg_powerup		= MCI_PWR_UP,
@@ -295,7 +295,7 @@  static void mmci_write_pwrreg(struct mmci_host *host, u32 pwr)
 static void mmci_write_datactrlreg(struct mmci_host *host, u32 datactrl)
 {
 	/* Keep ST Micro busy mode if enabled */
-	datactrl |= host->datactrl_reg & MCI_ST_DPSM_BUSYMODE;
+	datactrl |= host->datactrl_reg & MCI_DPSM_ST_BUSYMODE;
 
 	if (host->datactrl_reg != datactrl) {
 		host->datactrl_reg = datactrl;
@@ -1614,7 +1614,7 @@  static int mmci_probe(struct amba_device *dev,
 
 	if (variant->busy_detect) {
 		mmci_ops.card_busy = mmci_card_busy;
-		mmci_write_datactrlreg(host, MCI_ST_DPSM_BUSYMODE);
+		mmci_write_datactrlreg(host, MCI_DPSM_ST_BUSYMODE);
 		mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
 		mmc->max_busy_timeout = 0;
 	}
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index a1f5e4f49e2a..7cabf270050b 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -51,25 +51,27 @@ 
 #define MCI_QCOM_CLK_SELECT_IN_DDR_MODE	(BIT(14) | BIT(15))
 
 #define MMCIARGUMENT		0x008
-#define MMCICOMMAND		0x00c
-#define MCI_CPSM_RESPONSE	(1 << 6)
-#define MCI_CPSM_LONGRSP	(1 << 7)
-#define MCI_CPSM_INTERRUPT	(1 << 8)
-#define MCI_CPSM_PENDING	(1 << 9)
-#define MCI_CPSM_ENABLE		(1 << 10)
-/* Argument flag extenstions in the ST Micro versions */
-#define MCI_ST_SDIO_SUSP	(1 << 11)
-#define MCI_ST_ENCMD_COMPL	(1 << 12)
-#define MCI_ST_NIEN		(1 << 13)
-#define MCI_ST_CE_ATACMD	(1 << 14)
 
-/* Modified on Qualcomm Integrations */
-#define MCI_QCOM_CSPM_DATCMD		BIT(12)
-#define MCI_QCOM_CSPM_MCIABORT		BIT(13)
-#define MCI_QCOM_CSPM_CCSENABLE		BIT(14)
-#define MCI_QCOM_CSPM_CCSDISABLE	BIT(15)
-#define MCI_QCOM_CSPM_AUTO_CMD19	BIT(16)
-#define MCI_QCOM_CSPM_AUTO_CMD21	BIT(21)
+/* The command register controls the Command Path State Machine (CPSM) */
+#define MMCICOMMAND		0x00c
+#define MCI_CPSM_RESPONSE	BIT(6)
+#define MCI_CPSM_LONGRSP	BIT(7)
+#define MCI_CPSM_INTERRUPT	BIT(8)
+#define MCI_CPSM_PENDING	BIT(9)
+#define MCI_CPSM_ENABLE		BIT(10)
+/* Command register flag extenstions in the ST Micro versions */
+#define MCI_CPSM_ST_SDIO_SUSP		BIT(11)
+#define MCI_CPSM_ST_ENCMD_COMPL		BIT(12)
+#define MCI_CPSM_ST_NIEN		BIT(13)
+#define MCI_CPSM_ST_CE_ATACMD		BIT(14)
+/* Command register flag extensions in the Qualcomm versions */
+#define MCI_CPSM_QCOM_PROGENA		BIT(11)
+#define MCI_CPSM_QCOM_DATCMD		BIT(12)
+#define MCI_CPSM_QCOM_MCIABORT		BIT(13)
+#define MCI_CPSM_QCOM_CCSENABLE		BIT(14)
+#define MCI_CPSM_QCOM_CCSDISABLE	BIT(15)
+#define MCI_CPSM_QCOM_AUTO_CMD19	BIT(16)
+#define MCI_CPSM_QCOM_AUTO_CMD21	BIT(21)
 
 #define MMCIRESPCMD		0x010
 #define MMCIRESPONSE0		0x014
@@ -78,22 +80,27 @@ 
 #define MMCIRESPONSE3		0x020
 #define MMCIDATATIMER		0x024
 #define MMCIDATALENGTH		0x028
+
+/* The data control register controls the Data Path State Machine (DPSM) */
 #define MMCIDATACTRL		0x02c
-#define MCI_DPSM_ENABLE		(1 << 0)
-#define MCI_DPSM_DIRECTION	(1 << 1)
-#define MCI_DPSM_MODE		(1 << 2)
-#define MCI_DPSM_DMAENABLE	(1 << 3)
-#define MCI_DPSM_BLOCKSIZE	(1 << 4)
+#define MCI_DPSM_ENABLE		BIT(0)
+#define MCI_DPSM_DIRECTION	BIT(1)
+#define MCI_DPSM_MODE		BIT(2)
+#define MCI_DPSM_DMAENABLE	BIT(3)
+#define MCI_DPSM_BLOCKSIZE	BIT(4)
 /* Control register extensions in the ST Micro U300 and Ux500 versions */
-#define MCI_ST_DPSM_RWSTART	(1 << 8)
-#define MCI_ST_DPSM_RWSTOP	(1 << 9)
-#define MCI_ST_DPSM_RWMOD	(1 << 10)
-#define MCI_ST_DPSM_SDIOEN	(1 << 11)
+#define MCI_DPSM_ST_RWSTART	BIT(8)
+#define MCI_DPSM_ST_RWSTOP	BIT(9)
+#define MCI_DPSM_ST_RWMOD	BIT(10)
+#define MCI_DPSM_ST_SDIOEN	BIT(11)
 /* Control register extensions in the ST Micro Ux500 versions */
-#define MCI_ST_DPSM_DMAREQCTL	(1 << 12)
-#define MCI_ST_DPSM_DBOOTMODEEN	(1 << 13)
-#define MCI_ST_DPSM_BUSYMODE	(1 << 14)
-#define MCI_ST_DPSM_DDRMODE	(1 << 15)
+#define MCI_DPSM_ST_DMAREQCTL	BIT(12)
+#define MCI_DPSM_ST_DBOOTMODEEN	BIT(13)
+#define MCI_DPSM_ST_BUSYMODE	BIT(14)
+#define MCI_DPSM_ST_DDRMODE	BIT(15)
+/* Control register extensions in the Qualcomm versions */
+#define MCI_DPSM_QCOM_DATA_PEND	BIT(17)
+#define MCI_DPSM_QCOM_RX_DATA_PEND BIT(20)
 
 #define MMCIDATACNT		0x030
 #define MMCISTATUS		0x034