diff mbox series

[GIT,PULL] SCSI fixes for 6.9-rc4

Message ID 14ac270fbf39d20eb8fd8a94a73cb2ae75d9acec.camel@HansenPartnership.com
State New
Headers show
Series [GIT,PULL] SCSI fixes for 6.9-rc4 | expand

Commit Message

James Bottomley April 18, 2024, 6:39 p.m. UTC 
Two minor fixes: one in the core to improve the handling of warnings
and unconditionally clear the command flags when ending a request and
the other to add missing table values needed for bandwidth scaling in
qualcomm ufs.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

The short changelog is:

Bart Van Assche (1):
      scsi: core: Fix handling of SCMD_FAIL_IF_RECOVERING

Manivannan Sadhasivam (1):
      scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5

And the diffstat:

 drivers/scsi/scsi_lib.c     | 7 +++----
 drivers/ufs/host/ufs-qcom.c | 8 +++++++-
 2 files changed, 10 insertions(+), 5 deletions(-)

With full diff below.

James

---
diff mbox series

Patch

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 2e28e2360c85..5b3230ef51fe 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -635,10 +635,9 @@  static bool scsi_end_request(struct request *req, blk_status_t error,
 	if (blk_queue_add_random(q))
 		add_disk_randomness(req->q->disk);
 
-	if (!blk_rq_is_passthrough(req)) {
-		WARN_ON_ONCE(!(cmd->flags & SCMD_INITIALIZED));
-		cmd->flags &= ~SCMD_INITIALIZED;
-	}
+	WARN_ON_ONCE(!blk_rq_is_passthrough(req) &&
+		     !(cmd->flags & SCMD_INITIALIZED));
+	cmd->flags = 0;
 
 	/*
 	 * Calling rcu_barrier() is not necessary here because the
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 06859e17b67b..7a00004bfd03 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -47,7 +47,7 @@  enum {
 	TSTBUS_MAX,
 };
 
-#define QCOM_UFS_MAX_GEAR 4
+#define QCOM_UFS_MAX_GEAR 5
 #define QCOM_UFS_MAX_LANE 2
 
 enum {
@@ -67,26 +67,32 @@  static const struct __ufs_qcom_bw_table {
 	[MODE_PWM][UFS_PWM_G2][UFS_LANE_1] = { 1844,		1000 },
 	[MODE_PWM][UFS_PWM_G3][UFS_LANE_1] = { 3688,		1000 },
 	[MODE_PWM][UFS_PWM_G4][UFS_LANE_1] = { 7376,		1000 },
+	[MODE_PWM][UFS_PWM_G5][UFS_LANE_1] = { 14752,		1000 },
 	[MODE_PWM][UFS_PWM_G1][UFS_LANE_2] = { 1844,		1000 },
 	[MODE_PWM][UFS_PWM_G2][UFS_LANE_2] = { 3688,		1000 },
 	[MODE_PWM][UFS_PWM_G3][UFS_LANE_2] = { 7376,		1000 },
 	[MODE_PWM][UFS_PWM_G4][UFS_LANE_2] = { 14752,		1000 },
+	[MODE_PWM][UFS_PWM_G5][UFS_LANE_2] = { 29504,		1000 },
 	[MODE_HS_RA][UFS_HS_G1][UFS_LANE_1] = { 127796,		1000 },
 	[MODE_HS_RA][UFS_HS_G2][UFS_LANE_1] = { 255591,		1000 },
 	[MODE_HS_RA][UFS_HS_G3][UFS_LANE_1] = { 1492582,	102400 },
 	[MODE_HS_RA][UFS_HS_G4][UFS_LANE_1] = { 2915200,	204800 },
+	[MODE_HS_RA][UFS_HS_G5][UFS_LANE_1] = { 5836800,	409600 },
 	[MODE_HS_RA][UFS_HS_G1][UFS_LANE_2] = { 255591,		1000 },
 	[MODE_HS_RA][UFS_HS_G2][UFS_LANE_2] = { 511181,		1000 },
 	[MODE_HS_RA][UFS_HS_G3][UFS_LANE_2] = { 1492582,	204800 },
 	[MODE_HS_RA][UFS_HS_G4][UFS_LANE_2] = { 2915200,	409600 },
+	[MODE_HS_RA][UFS_HS_G5][UFS_LANE_2] = { 5836800,	819200 },
 	[MODE_HS_RB][UFS_HS_G1][UFS_LANE_1] = { 149422,		1000 },
 	[MODE_HS_RB][UFS_HS_G2][UFS_LANE_1] = { 298189,		1000 },
 	[MODE_HS_RB][UFS_HS_G3][UFS_LANE_1] = { 1492582,	102400 },
 	[MODE_HS_RB][UFS_HS_G4][UFS_LANE_1] = { 2915200,	204800 },
+	[MODE_HS_RB][UFS_HS_G5][UFS_LANE_1] = { 5836800,	409600 },
 	[MODE_HS_RB][UFS_HS_G1][UFS_LANE_2] = { 298189,		1000 },
 	[MODE_HS_RB][UFS_HS_G2][UFS_LANE_2] = { 596378,		1000 },
 	[MODE_HS_RB][UFS_HS_G3][UFS_LANE_2] = { 1492582,	204800 },
 	[MODE_HS_RB][UFS_HS_G4][UFS_LANE_2] = { 2915200,	409600 },
+	[MODE_HS_RB][UFS_HS_G5][UFS_LANE_2] = { 5836800,	819200 },
 	[MODE_MAX][0][0]		    = { 7643136,	307200 },
 };