diff mbox series

[v4,1/7] serial: exar: remove old Connect Tech setup

Message ID 06a04b6c683ca20c50646cc0836be869c2dacd87.1713382717.git.pnewman@connecttech.com
State Superseded
Headers show
Series serial: exar: add Connect Tech serial cards to Exar driver | expand

Commit Message

Parker Newman April 17, 2024, 8:31 p.m. UTC 
From: Parker Newman <pnewman@connecttech.com>

Preparatory patch removing existing Connect Tech setup code and
CONNECT_DEVICE macro.

Subsequent patches in this series will add in new UART family specific
setup code and new device definition macros to allow for supporting CTI
serial cards with Exar PCI IDs and CTI PCI IDs.

Signed-off-by: Parker Newman <pnewman@connecttech.com>
---
Changes in v3:
- Split code removals to own patch

 drivers/tty/serial/8250/8250_exar.c | 37 -----------------------------
 1 file changed, 37 deletions(-)

--
2.43.2
diff mbox series

Patch

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 604e5a292d4e..04ce5e8ddb24 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -358,17 +358,6 @@  pci_fastcom335_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 	return 0;
 }

-static int
-pci_connect_tech_setup(struct exar8250 *priv, struct pci_dev *pcidev,
-		       struct uart_8250_port *port, int idx)
-{
-	unsigned int offset = idx * 0x200;
-	unsigned int baud = 1843200;
-
-	port->port.uartclk = baud * 16;
-	return default_setup(priv, pcidev, idx, offset, port);
-}
-
 static int
 pci_xr17c154_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 		   struct uart_8250_port *port, int idx)
@@ -849,10 +838,6 @@  static const struct exar8250_board pbn_fastcom335_8 = {
 	.setup		= pci_fastcom335_setup,
 };

-static const struct exar8250_board pbn_connect = {
-	.setup		= pci_connect_tech_setup,
-};
-
 static const struct exar8250_board pbn_exar_ibm_saturn = {
 	.num_ports	= 1,
 	.setup		= pci_xr17c154_setup,
@@ -897,15 +882,6 @@  static const struct exar8250_board pbn_exar_XR17V8358 = {
 	.exit		= pci_xr17v35x_exit,
 };

-#define CONNECT_DEVICE(devid, sdevid, bd) {				\
-	PCI_DEVICE_SUB(							\
-		PCI_VENDOR_ID_EXAR,					\
-		PCI_DEVICE_ID_EXAR_##devid,				\
-		PCI_SUBVENDOR_ID_CONNECT_TECH,				\
-		PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_##sdevid), 0, 0,	\
-		(kernel_ulong_t)&bd					\
-	}
-
 #define EXAR_DEVICE(vend, devid, bd) { PCI_DEVICE_DATA(vend, devid, &bd) }

 #define IBM_DEVICE(devid, sdevid, bd) {			\
@@ -935,19 +911,6 @@  static const struct pci_device_id exar_pci_tbl[] = {
 	EXAR_DEVICE(ACCESSIO, COM_4SM, pbn_exar_XR17C15x),
 	EXAR_DEVICE(ACCESSIO, COM_8SM, pbn_exar_XR17C15x),

-	CONNECT_DEVICE(XR17C152, UART_2_232, pbn_connect),
-	CONNECT_DEVICE(XR17C154, UART_4_232, pbn_connect),
-	CONNECT_DEVICE(XR17C158, UART_8_232, pbn_connect),
-	CONNECT_DEVICE(XR17C152, UART_1_1, pbn_connect),
-	CONNECT_DEVICE(XR17C154, UART_2_2, pbn_connect),
-	CONNECT_DEVICE(XR17C158, UART_4_4, pbn_connect),
-	CONNECT_DEVICE(XR17C152, UART_2, pbn_connect),
-	CONNECT_DEVICE(XR17C154, UART_4, pbn_connect),
-	CONNECT_DEVICE(XR17C158, UART_8, pbn_connect),
-	CONNECT_DEVICE(XR17C152, UART_2_485, pbn_connect),
-	CONNECT_DEVICE(XR17C154, UART_4_485, pbn_connect),
-	CONNECT_DEVICE(XR17C158, UART_8_485, pbn_connect),
-
 	IBM_DEVICE(XR17C152, SATURN_SERIAL_ONE_PORT, pbn_exar_ibm_saturn),

 	/* USRobotics USR298x-OEM PCI Modems */